A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic.

Slides:



Advertisements
Similar presentations
Decomposition of fossil fuels for hydrogen production
Advertisements

Fixed-Bed Reactor for studying the Kinetics of Methane Oxidation on Supported Palladium Objectives: 1.The general goal is to understand: a)the influence.
Petroleum and Gas Processing(TKK-2136)
Selective Catalytic Reduction (SCR) by NH 3 in a Fixed-Bed Reactor HEE JE SEONG The Department of Energy and Geo-Environmental Engineering The Pennsylvania.
Outline Introduction Design of catalytic membrane reactor Results
Modelling & Simulation of Chemical Engineering Systems
First Law of Thermodynamics
Reactor Design for Complex Configurations
Adsorptive Desulfurization of Liquid Hydrocarbons: Langmuir Adsorption modeling using COMSOL Ram EGEE 520 Spring 2007.
Modeling Lime Kilns in Pulp and Paper Mills Process Simulations Ltd. #206, 2386 East Mall, Vancouver, BC, Canada August 23, 2006.
30 th ISTC Japan Workshop on Advanced Catalysis Technologies in Russia Fluidized bed catalytic pyrolysis and gasification of biomass for production of.
Module 5a Incinerators and Adsorbers MCEN 4131/ Preliminaries 1-minute paper: –things you like about class –helpful suggestions to improve your.
DIFFUSION MODELS OF A FLUIDIZED BED REACTOR Chr. Bojadjiev Bulgarian Academy of Sciences, Institute of Chemical Engineering, “Acad. G.Bontchev” str.,
Optimisation and Process Economy Karel Bouzek Department of Inorganic Technology, Institute of Chemical Technology Prague H. Wendt, G. Kreysa:
BY: Chris Tremblay.  Piece of equipment used to remove moisture from a wet solid by bringing the moisture into a gaseous state.  A drying medium (usually.
Real Reactors Fixed Bed Reactor – 1
Oxygen-assisted conversion of propane over metal and metal oxide catalysts Leiv Låte Department of Chemical Engineering, Norwegian University of Science.
1 Catalyst Fundamentals 朱信 Hsin Chu Professor Dept. of Environmental Eng. National Cheng Kung University.
INTRODUCTION AND BACKGROUND Sales of oxidation catalysts account for about 18% of total world sales of catalysts in the process industries. It is an enormous.
Team 1 Michael Glasspool Sarah Wilson Nicole Cosgrove
Development of Dynamic Models Illustrative Example: A Blending Process
Lecture 19 Tuesday 3/18/08 Gas Phase Reactions Trends and Optimuns.
1 Monolithic Reactors for Environmental Catalysis 朱信 Hsin Chu Professor Dept. of Environmental Eng. National Cheng Kung University.
Joshua Condon, Richard Graver, Joseph Saah, Shekhar Shah
Chemical Reaction Engineering (CRE) is the field that studies the rates and mechanisms of chemical reactions and the design of the reactors in which they.
Introduction to API Process Simulation
Fixed Bed Reactor Quak Foo Lee Chemical and Biological Engineering
Isothermal Reactor Design – Part 2
MAE 5310: COMBUSTION FUNDAMENTALS
Tarek Moustafa1 Chemical Reaction Engineering An Introduction to Industrial Catalytic Reactors Tarek Moustafa, Ph.D. November 2011.
Numerical and Experimental Study on Bed-to-Wall Heat Transfer in Conical Fluidized Bed Reactor 17 th International Conference on Mechatronics, Electrical.
1 CREL meeting 2004 CFD Simulation of Fisher-Tropsch Synthesis in Slurry Bubble Column By Andrey Troshko Prepared by Peter Spicka Fluent Inc. 10 Cavendish.
Hydrogen from Renewable Fuels by Autothermal Reforming: Alcohols, Carbohydrates, and Biodiesel Lanny D. Schmidt Department of Chemical Engineering and.
REACTOR DYNAMICS Fronts Spontaneous Oscillations and Patterns :
Partial Oxidation of Benzene to Maleic Anhydride
1 THE PRODUCTION OF HYDROGEN AND THE CAPTURE OF CARBON DIOXIDE USING CHEMICAL LOOPING Jason Cleeton 1, Chris Bohn 2, Christoph Müller 1,2, Stuart Scott.
Damitha Abeynayaka (st109642)
© 2015 Carl Lund, all rights reserved A First Course on Kinetics and Reaction Engineering Class 34.
© 2014 Carl Lund, all rights reserved A First Course on Kinetics and Reaction Engineering Class 12.
Energy and the Environment Fall 2013 Instructor: Xiaodong Chu : Office Tel.:
Chemical/Polymer Reactor Design
7 7-1 © 2003 Thomson Learning, Inc. All rights reserved Bettelheim, Brown, and March General, Organic, and Biochemistry, 7e.
INTRODUCTION Many heat and mass transfer processes in column apparatuses may be described by the convection – diffusion equation with a volume reaction.
Energy Balance on Reactive Processes
© 2015 Carl Lund, all rights reserved A First Course on Kinetics and Reaction Engineering Class 34.
Reactor Design S,S&L Chapter 6. Objectives De Novo Reactor Designs Plant Improvement –Debottlenecking –Increase Plant Capacity –Increase Plant Efficiency.
TESTING/PERFORMANCE EVALUATION OF CATALYSTS
© 2014 Carl Lund, all rights reserved A First Course on Kinetics and Reaction Engineering Class 17.
Kinetics and Reactor Design Kinetics and Reactor Design CHE-402 INSTRUCTOR: Dr. Nabeel Salim Abo-Ghander Chemical Reactions and Rate of Reactions Chapter.
Chemical Reaction Engineering (CRE) is the field that studies the rates and mechanisms of chemical reactions and the design of the reactors in which they.
© 2015 Carl Lund, all rights reserved A First Course on Kinetics and Reaction Engineering Class 35.
EXPERIMENTAL AND THEORETICAL STUDIES ON GLUCOSE HYDROGENATION TO PRODUCE SORBITOL M.Banu ( ) Marcia C. Martins Castoldi, React.Kinet.Catal.Lett.
Using COMSOL for Chemical Reaction Engineering Your name COMSOL.
IC-1/38 Lecture Kinetics IC-2/38 Lecture What is Kinetics ? Analysis of reaction mechanisms on the molecular scale Derivation.
From Model Component Behaviour to Industrial Reactor Simulation: Aromatic Hydrogenation in Hydrocracking J. W. Thybaut and G. B. Marin Laboratorium voor.
Dynamic modelling of adiabatic compressed air energy storage using packed bed thermal energy storage Wei He and Jihong Wang School of Engineering, University.
Objectives Explain the concept of reaction mechanism. Use the collision theory to interpret chemical reactions. Define activated complex. Relate activation.
Dynamic modelling of adiabatic compressed air energy storage using packed bed thermal energy storage Wei He and Jihong Wang School of Engineering, University.
Isothermal Reactor Design – Part 2
Boreskov Institute of Catalysis,
Ventilation Air Methane – Converting a Greenhouse Gas into Energy
Hydrogen generation and storage from sodium borohydride
ChE 402: Chemical Reaction Engineering
Conversion Process: Catalytic cracking Hydrocracking Thermal cracking
Chapter 5 Energy Balances with reaction.
Kinetics Patrick Cable, Dat Huynh, Greg Kalinyak, Ryan Leech, Wright Makambi, Ronak Ujla.
Aspen Reactors Amanda Hamilton, Jonathan Kalman, Harrison Kraus, Jenny Lam, Sophie Levy, Jacob Salem.
Chapter 7 Reaction Rates and Chemical Equilibrium
Petroleum and Gas Processing(TKK-2136)
CHEMICAL REACTOR DESIGN Third Year by Dr. Forat Yasir AlJaberi
Presentation transcript:

A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed USPC-5, Osaka, Japan, 2006 ИК СО РАН Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed Andrey N. Zagoruiko Boreskov Institute of Catalysis, Novosibirsk, Russia

A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed USPC-5, Osaka, Japan, 2006 ИК СО РАН Anaerobic oxidation concept Separate feeding of reagents Use of lattice (chemisorbed) oxygen instead of molecular one J.E.Bailey, F.J.M.Horn (1968), A.Renken (1972), Yu.Sh.Matros (1982) – theoretical conclusions on possibility of selectivity control in cyclic periodic operation mode V.A.Doroshenko et al. (1986), S.A.Veniaminov (1993), P.L.Silveston (1998), D.Creaser et al. (1999), R.Grabowski, S.Pietrzyk et. al. (2002) and many others – experimental confirmation of advantages of oxidative dehydrogenation of hydrocarbons in anaerobic mode E.H.Stitt (1998), S.D.Jackson et al. (2001) – practical application efforts

A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed USPC-5, Osaka, Japan, 2006 ИК СО РАН Anaerobic oxidation process development basis Complicated process – detailed mathematical modelling is required Account of reaction heat effects in adiabatic fixed catalyst beds A.N.Zagoruiko (2005) – simulation of model system of exothermic reactions (applying Eley-Rideal mechanism) in adiabatic fixed catalyst bed: increased selectivity and aim product yield; significantly lower maximum temperature; possibility of reaction performance in “reversed” heat wave, moving counter- currently to gas flow direction (with further decrease of temperature and increase of selectivity) Great variety is hard for analysis – case studies are required

A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed USPC-5, Osaka, Japan, 2006 ИК СО РАН Case study: propane oxydative dehydrogenation at V/Ti oxide catalyst Mechanism and kinetic data: R.Grabowski, S.Pietrzyk et. al. (2002) Eley-Rideal type mechanism: C 3 H 8 + [V 2 O 5 ]  C 3 H 6 + H 2 O + [V 2 O 4 ] C 3 H [V 2 O 5 ]  3 CO 2 + 3H 2 O + 9 [V 2 O 4 ] C 3 H [V 2 O 5 ]  3 CO 2 + 4H 2 O + 10 [V 2 O 4 ] [V 2 O 4 ] + ½ O 2  [V 2 O 5 ]  - surface fraction of oxidized sites (V 2 O 5 ) Reason of choice – transient kinetic available in literature, commercially important application

A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed USPC-5, Osaka, Japan, 2006 ИК СО РАН Model formulation Mathematical model: one-dimensional adiabatic fixed catalyst bed one-temperature model without heat/mass transfer limitations (quasi-homogeneous model) account for change of reaction mixture volume account for change of reaction mixture heat capacity solution of energy balance equation in enthalpy terms (both for gas and solid phases) without direct application of reactions heat effects and adiabatic heat rise approximation of reagents enthalpies (both gas and solid phase) by linear functions of temperature

A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed USPC-5, Osaka, Japan, 2006 ИК СО РАН Calculation of heat effects C 3 H 8 + ½ O 2  C 3 H 6 + H 2 O kcal/mol С 3 H O 2  3 CO H 2 O kcal/mol С 3 H O 2  3 CO H 2 O kcal/mol ============================================= C 3 H 8 + [V 2 O 5 ]  C 3 H 6 + H 2 O + [V 2 O 4 ] – 1.1 kcal/mol C 3 H [V 2 O 5 ]  3 CO 2 + 3H 2 O + 9 [V 2 O 4 ] kcal/mol C 3 H [V 2 O 5 ]  3 CO 2 + 4H 2 O + 10 [V 2 O 4 ] kcal/mol [V 2 O 4 ] + ½ O 2  [V 2 O 5 ] kcal/mol Heat effect of stages depend upon the bonding energy of oxygen at catalyst surface  Process temperature regime depends upon the catalyst surface thermodynamics

A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed USPC-5, Osaka, Japan, 2006 ИК СО РАН Moving heat wave of anaerobic oxidation Co-current heat front propagation (counter-current propagation is impossible due to endothermic character target reaction) Propane inlet concentration – 100% Oxygen inlet concentration – 0% Inlet temperature – C Initial catalyst temperature – 20 0 C Initial state of the catalyst – completely oxidized Catalyst bed length – 1 m Gas flow superficial inlet velocity – 1 m/sec Catalyst chemisorption capacity – 20.8 st.m 3 O 2 per 1 m 3 bed Difference between inlet and maximum temperature is insignificant Increased selectivity due to temperature decrease towards bed outlet

A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed USPC-5, Osaka, Japan, 2006 ИК СО РАН Counter-current (reverse-flow) feeding of propane and air Two-phase operation cycle Phase 1. Propane anaerobic oxidative dehydrogenation (catalyst reduction phase) inlet feed – 100% propane inlet temperature – ambient Phase 2. Catalyst reoxidation by air inlet feed – air inlet temperature – ambient Initial catalyst state – fully oxidized, preheated to C Phases alternation until achievement of established cyclic operation (accurately repeating of all process parameters from cycle to cycle)

A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed USPC-5, Osaka, Japan, 2006 ИК СО РАН Established autothermal cyclic operation Temperature in the catalyst bed Catalyst reduction phaseCatalyst reoxidation phase

A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed USPC-5, Osaka, Japan, 2006 ИК СО РАН Established autothermal cyclic operation Catalyst oxidation degree profiles Catalyst reduction phaseCatalyst reoxidation phase

A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed USPC-5, Osaka, Japan, 2006 ИК СО РАН Autothermal cyclic operation Cycle duration influence Required duration of reduction/reoxidation phases may be generally different – duration conjugation is necessary (application of different flow rates)

A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed USPC-5, Osaka, Japan, 2006 ИК СО РАН Selectivity/yield issues Selectivity in cyclic anaerobic mode is higher than in steady-state, though the propane conversion may be lower Reason - self-sufficient structure of the moving reaction zone in the bed, efficient residence time may be too low Possible solutions for anaerobic process: conversion depth improvement (increase of catalyst oxygen capacity) extension of reaction zone (increase of axial heat conductivity) The propylene yield maybe competitive with steady-state, but propylene output per unit catalyst volume will be higher (due to undiluted propane use)

A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed USPC-5, Osaka, Japan, 2006 ИК СО РАН Simulation fundamentals anaerobic oxidative dehydrogenation of propane may be performed in cyclic autothermal mode with high selectivity; maximum operation temperature (both at anaerobic oxidation and reoxidation phases) is much lower than in steady-state process due to low inlet gas temperatures and efficient use of solid catalyst heat capacity; temperature regime of the process depends upon the thermodynamic properties of the catalyst (oxygen bonding energy); propane conversion and propylene yield may be controlled by variation of oxygen storage capacity (catalyst surface area) and catalyst bed axial heat conductivity; Generally – more parameters to be independently optimized, more degrees of freedom for process development and optimization

A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed USPC-5, Osaka, Japan, 2006 ИК СО РАН Advantages of anaerobic cyclic process compared to conventional steady-state process Simple and cheap reactor design (fixed bed reactors, minimized heat-exchange environment) High oxidation selectivity and low operation temperature Use of undiluted propane as feed, increase of unit production capacity of the catalyst Increased process safety due to absence of direct contact between hydrocarbons and molecular oxygen Use of air instead pure oxygen without separation complications, arising from nitrogen presence in product stream Efficient coke incineration in each reoxidation cycle – no coke accumulation, probable increase of catalyst lifetime

A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed A.N.Zagoruiko. Anaerobic catalytic oxidation of hydrocarbons in moving heat waves. Case simulation: propane oxidative dehydrogenation in a packed adiabatic V-Ti oxide catalyst bed USPC-5, Osaka, Japan, 2006 ИК СО РАН Thank you for attention Q&A