Date of download: 5/30/2016 Copyright © ASME. All rights reserved. From: Effect of Palmitoyl Nanogold Particles on the Subzero Thermal Properties of Phosphate Buffered Saline Solutions J. Nanotechnol. Eng. Med. 2010;1(2): doi: / Shows the variation in melting point temperature (Tm) as a function of DMSO concentration at 10°C/min, 20°C/min, and 40°C/min. The % (v/v) concentration of DMSO is shown in the x-axis, while the measured value of the melting temperature (K) is shown on the y-axis. Figure Legend:

Date of download: 5/30/2016 Copyright © ASME. All rights reserved. From: Effect of Palmitoyl Nanogold Particles on the Subzero Thermal Properties of Phosphate Buffered Saline Solutions J. Nanotechnol. Eng. Med. 2010;1(2): doi: / Shows the variation in homogeneous nucleation temperature (Th) as a function of DMSO concentration at 10°C/min, 20°C/min, and 40°C/min. The % (v/v) concentration of DMSO is shown in the x-axis, while the measured value of the homogenous nucleation temperature (K) is shown on the y-axis. Figure Legend:

Date of download: 5/30/2016 Copyright © ASME. All rights reserved. From: Effect of Palmitoyl Nanogold Particles on the Subzero Thermal Properties of Phosphate Buffered Saline Solutions J. Nanotechnol. Eng. Med. 2010;1(2): doi: / Shows the variation in melting temperature (Tm) of the nanoparticle-DMSO-PBS system as a function of DMSO and nanoparticle concentration at 10°C/min, 20°C/min, and 40°C/min. The % (v/v) concentration of DMSO is shown on the bottom x-axis, while the NP concentration (nM/ml) is shown on the top x-axis. The measured value of the melting temperature (K) is shown on the y-axis. Figure Legend:

Date of download: 5/30/2016 Copyright © ASME. All rights reserved. From: Effect of Palmitoyl Nanogold Particles on the Subzero Thermal Properties of Phosphate Buffered Saline Solutions J. Nanotechnol. Eng. Med. 2010;1(2): doi: / Shows the variation in homogeneous nucleation temperature (Th) of the nanoparticle-DMSO-PBS system as a function of DMSO and nanoparticle concentration at 10°C/min, 20°C/min, and 40°C/min. The % (v/v) concentration of DMSO is shown on the bottom x-axis, while the NP concentration (nM/ml) is shown on the top x-axis. The measured value of the homogenous nucleation temperature (K) is shown on the y-axis. Figure Legend:

Date of download: 5/30/2016 Copyright © ASME. All rights reserved. From: Effect of Palmitoyl Nanogold Particles on the Subzero Thermal Properties of Phosphate Buffered Saline Solutions J. Nanotechnol. Eng. Med. 2010;1(2): doi: / Shows the effect of nanoparticles on the measured values of Tm, i.e., the difference in the measured values of Tm obtained with and without NPs is shown. The % (v/v) concentration of DMSO is shown on the bottom x-axis, while the NP concentration (nM/ml) is shown on the top x-axis. The difference in measured value of the melting temperature (K) with and without NPs is shown on the y- axis. Figure Legend:

Date of download: 5/30/2016 Copyright © ASME. All rights reserved. From: Effect of Palmitoyl Nanogold Particles on the Subzero Thermal Properties of Phosphate Buffered Saline Solutions J. Nanotechnol. Eng. Med. 2010;1(2): doi: / Shows the effect of nanoparticles on the measured values of Th, i.e., the difference in the measured values of Tm obtained with and without NPs is shown. The % (v/v) concentration of DMSO is shown on the bottom x-axis, while the NP concentration (nM/ml) is shown on the top x-axis. The difference in measured value of the homogenous nucleation temperature (K) with and without NPs is shown on the y-axis. Figure Legend: