The Ultimate Power Tools DELTA
The Ultimate Power Tools DATA COLLECTORS
The Ultimate Power Tools Data collectors Sigma2001 & Sigma2D Sigma2001 able to read analogue and Digital torque transducers Sigma2D able to read Digital torque transducers only
The Ultimate Power Tools Data collectors Delta 4000 & Delta 4D Delta 4000 able to read Analogue and Digital torque transducers Delta 4D able to read Digital torque transducers only
The Ultimate Power Tools DELTA Applications : Sigma2001 applications plus : Sequential torque checking of tools on an assembly line (1000 memorised stations with their tolerances). Tightening report (mini - accepted - maxi) Statistics (ISO, NF, Q54000 & CNOMO) Torque system control torque (target torque) Curve analysis T = f(time) via DeltaPC software.
The Ultimate Power Tools Data collectors Delta 5000 & Delta 5D Delta 5000 able to read Analogue and Digital torque transducers Delta 5D able to read Digital torque transducers only
The Ultimate Power Tools DELTA Applications : Delta 4000 applications plus : Angle checking when requested. Sequential torque checking of tools on an assembly line (1500 memorised stations of 5 results with their tolerances). Joint characteristics analysis
The Ultimate Power Tools Different Features Memory : Qty of stations EC calibration Curve : Statistics : Control output : Report lights : Sigma nono Mean & range nonoSigma nono nonoDelta yes1yesyesTorqueDelta yes5yesyes Torque & angle
The Ultimate Power Tools ART-DRT
The Ultimate Power Tools Dynamic Digital Transducers DRT4 Torque DRT5 Torque & Angle Range from 0,2 to 1400 Nm Same size for Torque or T&A transducer Compatible with impulse tools Full digital transducers Built-in memory inside type of transducer calibration information over torque information
The Ultimate Power Tools Dynamic Digital Transducers
The Ultimate Power Tools Dynamic Analogue Transducers ART4 Torque ART5 Torque & Angle Range from 0,2 to 180 Nm Fixed sensitivity: 2mV/V Accuracy +/-0.35% full scale Same size for Torque or T&A transducer Compatible with impulse tools
The Ultimate Power Tools Dynamic Analogue Transducers
The Ultimate Power Tools Delta PC Software
The Ultimate Power Tools Delta PC SOFTWARE : Basic and Advanced software UP Load and Down Load Parameters Curves Results Campaigns Data transfer to an Excel file
The Ultimate Power Tools DELTA PC Delta PC SOFTWARE : Compatible with: -Sigma2001 & 2D -Delta4000 & 4D -Delta5000 & 5D
The Ultimate Power Tools COMMON CHARACTERISTICS Sigma and Delta’s
The Ultimate Power Tools REAL PORTABLE DEVICE Rechargeable battery powered. Extractable battery quick exchange with a charged battery Internally or externally rechargeable with a multi- standard charger multi-voltage 115/230V 8 or 14 hours autonomy more than 1000 discharge / recharge cycles Low battery warning. Energy saving function after a programmable time of non use Full context saving when exchanging a battery.
The Ultimate Power Tools CONNECTION TO ANALOGUE TRANSDUCERS Standard analogue strain gauge transducers (ST / CD / CF / ART and OTHERS such as force transducers) ART5ART4 Sigma 2001, Delta4000/5000
The Ultimate Power Tools CONNECTION TO DIGITAL TRANSDUCERS Standard digital transducers Standard digital transducers (DRT4 and 5) Sigma 2001&2D Delta4000 & 4D Delta5000 & 5D
The Ultimate Power Tools PRINTER & PC CONNECTIONS // printer DeltaPC Loading parameters & results/curves RS232
The Ultimate Power Tools INPUTS / OUTPUTS OUTPUTS Tightening reports (maxi ; accepted ; mini) for remote display for example. Torque reached output to control a pneumatic tool (shut off the air supply). INPUTS Zero reset and memorisation of the measure. Zero reset without memorisation of the measure. OUTPUTS Analog signal ( 0 – 10V ) to display the torque curve on an oscilloscope for example. Common I/O Specific to Delta 4000/5000
The Ultimate Power Tools Measurement