Here comes your footer Page 2 MTE TECHNOLOGY, INC. Established 1987 by MR. CLEMENT CHAN Established 1987 by MR. CLEMENT CHAN Approximately 250 employees at 3 sites in 3 countries. Approximately 250 employees at 3 sites in 3 countries. ISO 9001:2008 & ISO 14001:2004 Certified ISO 9001:2008 & ISO 14001:2004 Certified MTE Technonology Inc. Phils. overseen & managed by MR.CHARLES JAYARAJ MTE Technonology Inc. Phils. overseen & managed by MR.CHARLES JAYARAJ The company is a duly registered domestic corporation situated at Lot C2-10, Carmelray Industrial Park II, Brgy. Punta, Calamba City, Laguna it is a subsidiary of Microtech Engineering Pte Ltd. In Singapore since it’s establishment in the Philippines way back in Our customers are mostly from the Multi-National Companies on Electronic, Automotive and Semiconductor Industry. In which we are listed as a preferable contractor. In order to provide the quality precision products & Services to our customers, we strive hard to upgrade and invest on our facility to ensure the quality of our products & services that meets our customers requirements and expectations at all times. _______________________ ____________________ CHARLES JAYARAJ CLEMENT CHAN CHARLES JAYARAJ CLEMENT CHAN General Manager President General Manager President Introduction

Here comes your footer Page 3 QUALITY POLICY Manufacturing M anufacturing Towards T owards Excellence E xcellence Committed to Quality and Environmental Management System in achieving COSTUMER SATISFACTION & ENVIRONMENTAL FRIENDLY FACILITY by: Meeting customers’ requirements; Complying with all legal and other requirements; Controlling the significant environmental aspects and impacts of our direct & indirect process; Conservation of resources; and Continually improve on the effectiveness of the quality & Environmental Management System through relevant trainings of employees and associates

Here comes your footer Page 4 Introduction SERVICES OFFERED FABRICATION Conventional Lathe & Milling Conventional Lathe & Milling Wire Cut, EDM, Super Drill Wire Cut, EDM, Super Drill CNC Machining or Milling Center CNC Machining or Milling Center Precision Grinding Precision Grinding Finishing/Assembly Finishing/Assembly METAL STAMPING CNC Turret CNC Turret Press Machining Press Machining Sheet Metal Bending Sheet Metal Bending Tig Welding (SUS, Aluminum & Steel) Tig Welding (SUS, Aluminum & Steel) Finishing/Assembly Finishing/Assembly CUTTING / MASS PRO. Precision Lathe & CNC Turning Precision Lathe & CNC Turning AUTOMATION Machine Assembly Machine Assembly Machine & Process Improvement Machine & Process Improvement

Here comes your footer Page 5 Introduction Our BUSINESS PARTNERS

Here comes your footer Page 6 Sample Projects FABRICATION & ASSEMBLY MC501 CDR6 SUS304 MISUMI LINEAR BUSHING LOAD & UNLOAD JIG Size (mm) : 75 x 98 x 118 ALT6 With EN Plating WAFER CASSETTE Size (mm) : 275 x 290 x 330

Here comes your footer Page 7 Sample Projects FABRICATION & ASSEMBLY MISUMI LINEAR GUIDE CHECKING JIG Size (mm) : 30 x 150 x 190 SLIDER FAB JIG Size (mm) : 12 x 85 x 180 SUS420J2 SUS304 AL5058 SUS420J2 HRC50~55 SUS420J2 HRC50~55 SUS304 M1.6 x P.35 INTERNAL THREAD 88 Holes

Here comes your footer Page 8 Sample Projects FABRICATION & ASSEMBLY VACUUM JIG Size (mm) : 40 x 76 x 195 WAFER FAB JIG Size (mm) : 22 x 158 x 158 1/8 x 8 PNEUMATIC FITTINGS SUS420J2 HRC50~55 SUS420J2 HRC50~55 SUS304 MISUMI MAGNETS LOAD POSITION UNLOAD POSITION

Here comes your footer Page 9 Sample Projects FABRICATION & ASSEMBLY WAFER FAB JIG Size (mm) : 100 x 150 x 220 VACUUM JIG (for PCB ASSEMBLY) Size (mm) : 45 x 250 x 300 AL5052 With EN Plating SUS420J2 HRC50~55 BRASS SUS304 PNEUMATIC FIITING AL5052 SUS303

Here comes your footer Page 10 Sample Projects FIXTURE ASSEMBLIES PRODUCTION WORK TABLE Size (mm) : 450 x 525 x 1850 PRODUCTION WORK TABLE (Perforated Type) Size (mm) : 750 x 100 x 800 ALUMINUM STANDARD FRAME SUS303 SUS304 SQUARE TUBE SUS303 ROD SUS304 MIRROR PERFORATED PLATE

Here comes your footer Page 11 Sample Projects FIXTURE ASSEMBLIES MACHINE PROTECTIVE COVER Size (mm) : 790 x 890 x 945 ALUMINUM STANDARD FRAME SUS304 ENGINEERING PLASTIC GUARDED SCRAP BIN Size (mm) : 385 x 410 x 568 ANTI-STATIC CASTER WHEEL SUS304 BEND PLATE MIRROR STAINLESS SUS304 MIRROR ANTI-STATIC ACRYLIC

Here comes your footer Page 12 Sample Projects FIXTURE ASSEMBLIES WASHING BASKETS Size (mm) : 200 x 305 x 330Size (mm) : 138 x 375 x 375 SUS303 ROD ELECTRO POLISHED SUS MESH WIRE FENCE SUS303 ROD ELECTRO POLISHED PEEK (Beige) SUS303 ELECTRO POLISHED

Here comes your footer Page 13 Sample Projects FABRICATION - Others CDM AL5052 / T6 SUS303 / 304 PALLETS PRECISION PARTS Mold & Dies CARBIDE SUS440C w/ HRC SKS3 w/ HRC SUS440C w/ HRC Criticality: +/ mm or mm Treatment: HRC, DFC, & others AL5052 w/ EN Plating SUS440C HRC50~55 BRASS ULTEM CONSUMABLE PARTS

Here comes your footer Page 14 Sample Projects METAL STAMPED PARTS AL5052 / T6 ALUMINUM t= 1.50mm SECC t= 2.00mm SECC t= 1.60mm MILD STEEL t= 2.0mm w/ BLACKENING MILD STEEL t= 1.50mm SUS304 t=1.00 SUS304 t=0.50 Process Material Thickness BENDING SUS, MS, SECC, AL 3mm, 3mm, 3mm, 5mm max. TURRET SUS, MS, SECC, AL subjective PRESS SUS, MS, SECC, AL subjective

Here comes your footer Page 15 Sample Projects CUTTING / CNC TURNED PARTS AL5052 / T6 PEEK Ø 4.00mm (and other Engineering Plastics) COPPER Ø 6.00mm ALUMINUM Ø 10.00mm SUS303 Ø3.00mm SUS303 Ø1.50mm SUS416 Ø4.00mm Diameter Size Available: Ø1.20 ~ Ø12.00mm HRC & Special Coating/Finishing consideration

Here comes your footer Page 16 Sample Projects AUTOMATION AL5052 / T6 MACHINE & PROCESS IMPROVEMENT From manual to automatic loading & unloading process. CONTROL SYSTEM Electro-Pneumatic Controls LOAD & UNLOAD FIXTURE SUS & Aluminum Material Actual Set-up of Fixture MACHINE ASSEMBLY CTL PANEL CTL SYSTEM OPTICAL 3D PROFILING MACHINE PLASMA WELDING MACHINE

Here comes your footer Page 17 CAPABILITY: CNC Milling Machine Center-12 units Horizontal Milling Machine- 2 units CNC Lathe-18 units CNC Tap & Drill Machine Centre- 3 units Conventional Vertical Milling Machine-11 units Conventional Lathe Machine- 4 units Surface Grinding Machine-9 units Centerless Grinding Machine-1 unit Bench Grinder-5 units Bench Drill -3 units CNC Wire Cut Machine-3 units EDM Machine-1 units Shearing Machine-2 units Bending Machine-4 units Magnetic Deburring Machine-1 unit Deburring Machine-1 unit Degreasing Machine-1 unit CNC Auto Lathe Machining-22 units Horizontal Band-saw Machine-2 units Vertical Band-saw Machine-1 unit Manual Slotting Machine-1 unit Hydraulic Riveting Machine-1 unit Multi-Spindle Tapping Machine-2 units MACHINERIES & EQUIPMENTS

Here comes your footer Page 18 MACHINERIES & EQUIPMENTS Fine Cut Machine-1 unit Universal Tool Cutter & Grinder-1 unit Precision Machine Tool Grinder-1 unit Profile Grinding Machine-2 units High Frequency Brazing Machine-1 unit Induction Hardening Furnace-1 unit EDM Drilling Machine (Super Drill)-1 unit Automatic Spot Welding Machine-1 unit DNT Table Spot Welding Machine-1 unit Tumbler Machine-1 unit Dipping Washing Machine-3 units Chemical Washing Machine-1 unit Lapping Machines-1 unit Centrifugal Finishing Machine-1 unit Hydraulic Stamping Press Machine 45 tons-1 unit Hydraulic Stamping Press Machine 60 tons-1 units Hydraulic Stamping Press Machine 80 tons-1 unit Hydraulic Stamping Press Machine 110 tons-3 units Hydraulic Riveting Machine-1 unit CNC Turret Punch -2 units Hydraulic Stamping Press Machine 200 tons-2 units Ultrasonic Washing Machine-1 unit Electric Lifter-1 unit Pork Lift-1 unit Tig Welding Machine-3 units Vacuum Pack Machine-1 unit CAPABILITY:

Here comes your footer Page 19 MEASURING TOOLS & EQUIPMENTS Coordinate Measuring Machine-2 units Mitutoyo Digital Micrometer (25-50mm)-1 unit Mitutoyo Analog Blade Micrometer-1 unit Mitutoyo Blade Micrometer (0-25mm)-6 units Mitutoyo Inside Micrometer (0-25mm)-1 unit Mitutoyo Tube Micrometer (0-25mm)-1 unit Mitutoyo Vernier Micrometer (0-25mm)-1 unit Digital Outside Micrometer (0-25mm)-28 units Groove Micrometer (0-25mm)-1 unit Mitutoyo Dial Caliper (0-150mm)-1 unit Mitutoyo Dial Caliper (0-300mm) -1 unit Mitutoyo Digital Caliper (0-200mm)-13 units Mitutoyo Digital Caliper (0-300mm)-5 units Mitutoyo Digital Caliper (0-150mm)-28 units Mitutoyo Vernier Caliper (0-200mm)-3 units Mitutoyo Vernier Caliper (0-300mm)-5 units Mitutoyo Vernier Caliper (0-150mm)-5 units Mitutoyo Vernier Caliper (0-800mm)-1 unit Mitutoyo Vernier Caliper (0-1500mm)-1 unit Mitutoyo Digimatic Indicator (0-25.4mm)-4 units Mitutoyo Digimatic Indicator (0-50.8mm)-3 units Mitutoyo Dial Test Indicator (0.1mm)-6 units Mitutoyo Dial Test Indicator (0.4mm)-1 unit Mitutoyo Dial Test Indicator (0.5mm)-4 units CAPABILITY:

Here comes your footer Page 20 MEASURING TOOLS & EQUIPMENTS Digital Height Gauge (0-600mm)-1 unit Digital Height Gauge (0-300mm) -2 units Digital Height Gauge (0-1000mm)-1 unit Seiwa Optical Microscope-1 unit Pin Gauge Set-9 sets Microscope with CCD Camera-1 unit Roundness Tester-1 unit Round Test Tester-1 unit Profile Projector-1 unit Gauge Block-8 sets Quick Vision-1 unit Top Bench Contour Projector-1 unit Rondcom Machine-1 unit Calibration Test Machine-1 unit Caliper Checker-5 units Wringing Jig-5 units Dino Lite Scope-1 unit Roughness Tester-1 unit CAPABILITY:

Here comes your footer Page 21 Contact/s: MTE TECHNOLOGY INC. Contact Person: Mr. Charles Jayaraj (Vice-President) Plant & Office Address:Lot C2-10 Carmelray Industrial Park II, Brgy. Punta, Calamba City 4027 Laguna Philippines Contact Numbers: , Fax Number: MICROTECH ENGINEERING PTE LTD. Contact Person: Mr. Clement Chan (President) Plant & Office Address:6 Penjuru Close Singapore Contact Numbers: , Fax Number: Website: