1. Pulp Mill Operator Training Class 4

2. Review Refiner Feed Tank 05-PF-001-001 Screen Feed Tank 05-PF-002-001 Washer stock and showers 05-PF-003-001 Washer Vacuum and contols 05-PF-003-002 Filtrate tank, WBL screen 05-PF-006-001 MC Pump, Effluent Lift Station 05-PF-004-001 Seal water, bathroom, etc 05-PF-005-001 Showering pumps/ filter 05-PF-007-001 Shower collection systems 06-PF-008-001

3. Process Flow

4. What haven’t we covered PID’s – Blow Tank – NCG systems – Consistency water tank 11-PF-001-001 – HD tower 12-PF-4611-001 – Stock Prep – Rejects Next layer of detail (equipment manuals, interlock controls, sops) – Refiners (Andritz Book) – Screens (Andritz Book) – Washer (Kadant Book) – MC Pump (Sulzer Book)

5. Blow Tank, NCG Blow Tank gets an additional cyclone and a replacement Fiber separator NCG’s are pulled from all stock tanks in new building and piped to a steam ejector on pulp mill roof. Blow tank dilution feeds new cyclone flush, current cyclone like today, and new dilution valves on suction of pumps. Blow tank pumps get bigger motors and new impellars NCG P&ID

6. Consistency WW Tank Stock Storage Tank becomes the consistency water tank

7. Washer Wire Washer Wire Example – Pass around – Look at the seam – Feel the texture and weight of the Fabric

8. Field Trip (OCC Pad) Strainer Heat Exchanger Vacuum boxes (drainage boxes) Repulper assembly

9. Controls Narrative R&M Summary Andritz Control Narrative

10. Andritz Refiner Pictures Refiner Manual Screen Manual

11. Kadant Chemi Washer Manual

12. Sulzer - MC Pump MC Pump Manual

13. SOP’s These will come from a combination of OEM manual, controls narrative, and our installation walk down. Some outlined already Will use them with Simulator Will use them to walk down equipment See Intranet page