1. BEZEL SETTING

10. THE DIME AND PENNY

11. MAKE A BEZEL CUP

12. MEASURE SOME BEZEL WIRE AROUND A COIN

13. MARK AND CUT

14. FILE THE CUT ENDS, AND THEN, FIT TOGETHER

15. SET SOLDER, FLUX, THEN SOLDER

16. ROUND ON A MANDREL, CHECK FOR FIT.

17. MARK & CUT BACK-PLATE, SET SOLDER

18. FLUX, THEN SOLDER

19. CUT EXCESS METAL OFF, THEN FILE SMOOTH.

20. MAKE A ½ ROUND BAND,………… FILE OR SAND A FLAT SPOT

21. SET BEZEL CUP & BAND IN A THIRD HAND

22. HEAT FROM THE INTERIOR UNTIL SOLDER MELTS

23. CLEAN, SAND, & LIGHT BUFF. ADD PAPER TO CUSHION AND RAISE

24. USE BURNISHER OR BEZEL PUSHER TO BEND BEZEL OVER THE TOP OF THE COIN OR STONE.

26. THE FINISHED WORK

27. THE BEZEL COIN

28. END