1. NWOSU ITV Department

2. ITV Instruction

3. Index Basic screen Basic screen Basic screen Basic screen Place call Place call Place call Place call Dial manually Dial manually Dial manually Dial manually Hang up Hang up Hang up Hang up Restart Restart Restart Volume Volume Volume Computer ComputerComputer Document reader Document readerDocument readerDocument reader VCR VCRVCR Auxiliary AuxiliaryAuxiliary

4. The touch panel defaults to the Title Screen when a call terminates or the Polycom restarts. Return to Index

5. Basic Screen Return to Index

6. Place a Call Return to Index

7. To place a call, press the Place Call button. Return to Index

8. Select Address Touch the Pink arrows to scroll down to the desired address. (Addresses are listed in alphabetical order.) Return to Index

9. Select Address When touched, the pink arrows should turn blue. When selected, the address will be highlighted in a gold box. Return to Index

10. After you find the address press the Select button and this will place your call. Return to Index

11. To dial a call manually Return to Index

12. Using the keyboard, type the address of the call to be dialed then press CALL Return to Index

13. If you are teaching, make sure the Near Instructor camera is selected so your students from the other sites can see you. Return to Index

14. Hang up the Polycom Return to Index

15. After class is over, always disconnect from the other sites. Press the Hang Up button (This should be done after every class). Return to Index

16. Restart the Polycom Return to Index

17. To restart the polycom, press the Restart Polycom button. Return to Index

18. Touch the green square “Yes – Restart Polycom” Return to Index

19. After the Polycom restarts, it defaults to the Title Screen Return to Index

20. Volume control Return to Index

21. To turn the volume up in your classroom, press the button Return to Index

22. To turn the volume down in your classroom, press the button Return to Index

23. To use the computer, press the Computer button Return to Index

24. To use the document projector, press the Document button Return to Index

25. If you want to use the VCR:  place a tape in the VCR  make sure the power is on  press “Play” on the VCR  select the VCR button on the screen  make sure students can see on both TVs (Video 1 or Video 2) Return to Index

26. The Auxiliary button will send what is on your laptop to the TV’s Plug your laptop into the RCA jack Return to Index

27. The End! Return to Start