Presentation is loading. Please wait.

Presentation is loading. Please wait.

CONTROL OF MICROORGANISMS 1. TOPICS  Sterilization & Disinfection.  Antimicrobial definitions.  Factors influence the effectiveness of antimicrobial.

Similar presentations


Presentation on theme: "CONTROL OF MICROORGANISMS 1. TOPICS  Sterilization & Disinfection.  Antimicrobial definitions.  Factors influence the effectiveness of antimicrobial."— Presentation transcript:

1 CONTROL OF MICROORGANISMS 1

2 TOPICS  Sterilization & Disinfection.  Antimicrobial definitions.  Factors influence the effectiveness of antimicrobial treatment.  Methods of Sterilization & Disinfection. 2

3 Sterilization To completely remove all kinds of microbes (bacteria, mycobacteria, viruses & fungi) by physical or chemical methods. Effective to kill “Bacterium Spores”. Disinfection To reduce the number of pathogenic microorganisms to the point where they no longer cause diseases. Usually involves the removal of vegetative or non- endospore forming pathogens. 3

4 ANTIMICROBIAL DEFINITIONS Antiseptic : A substance applied to living tissue. Disinfectant : Antimicrobial agent used on inanimate objects. Degerming : Removal of most microbes in a limited area, (Alcohol swab on skin). Sanitization : Use of chemical agent on food handling equipment to meet public health standards and minimize chances of disease transmission, (Soap & Hot Water). 4

5 Bacteriostatic: Prevents growth of bacteria. Bactericide: An agent that kills bacteria (Most do not kill endospores). Germicide: An agent that kills certain microorganisms. Fungicide: An agent that kills fungi. Sporicide: An agent that kills bacterial endospores and fungal spores. 5

6 FACTORS INFLUENCE THE EFFECTIVENESS OF ANTIMICROBIAL TREATMENT 1.Number of Microbes: The more microbes present, the more time it takes to eliminate population. 2.Type of Microbes: Endospores are very difficult to destroy, Vegetative pathogens vary widely in susceptibility to different methods of microbial control. 3.Environmental influences: Presence of organic material (blood, feces, saliva, pH etc.) tends to inhibit antimicrobials. 4.Time of Exposure: Chemical antimicrobials and radiation treatments are more effective at longer times. In heat treatments, longer exposure compensates for lower temperatures. 6

7 PHYSICAL METHODS Heat Filtration Radiation 7

8 A. HEAT Kill microorganisms by denaturing their enzymes and other proteins. Heat resistance varies widely among microbes. Fast, Reliable, Inexpensive. Types of heat: 1. Moist heat 2. Dry heat 8

9 Moist Heat: Kills microorganisms by coagulating their proteins. 1. Boiling: Heat to 100 o C. Kills vegetative forms of bacterial pathogens. Most pathogens can be killed within 10 minutes or less. Endospores and some viruses are not destroyed this quickly. In general, moist heat is much more effective than dry heat. 9

10 Reliable sterilization with moist heat requires temperatures above that of boiling water. 2. Autoclave: Chamber which is filled with hot steam under pressure. Preferred method of sterilization, unless material is damaged by heat, moisture, or high pressure. - Temperature of steam reaches 121 o C. - All organisms and endospores are killed within 15 minutes. 10

11 3. Pasteurization: Used to reduce microbes responsible for spoilage of milk, juices, etc. - Classic Method of Pasteurization: Milk was exposed to 65 o C for 30 minutes. - High Temperature Short Time Pasteurization (HTST): Used today. Milk is exposed to 72 o C for 15 seconds. 11

12 Dry Heat: 1.Direct Flaming (burner) : Used to sterilize inoculating loops and needles. Heat metal until it has a red glow. 2. Incineration: (to burn to ashes), effective way to sterilize disposable items (paper cups, dressings) and biological waste. 3. Hot Air Sterilization: Place objects in an oven. Require 2 hours at 170 o C for sterilization. 12

13 B. FILTRATION Removal of microbes by passage of a liquid or gas through a screen like material with small pores. Used to sterilize heat sensitive materials like, Culture media Enzymes Vaccines Antibiotics 13

14 14

15 C. RADIATION Two types of radiation kill microbes: 1.Ionizing Radiation: Gamma rays, X rays. Have short wavelengths (less than 1 nanometer). Used to sterilize pharmaceuticals, disposable medical supplies( like plastic syringes, catheters, surgical gloves) and food. 15

16 2. Ultraviolet light (Nonionizing Radiation): Wavelength is longer than 1 nanometer. Damages DNA by producing thymine dimers, which cause mutations. Used to disinfect operating rooms, nurseries, cafeterias. 16

17 2. Ultraviolet light (Nonionizing Radiation): Wavelength is longer than 1 nanometer. Damages DNA by producing thymine dimers, which cause mutations. Used to disinfect operating rooms, nurseries, cafeterias. 17


Download ppt "CONTROL OF MICROORGANISMS 1. TOPICS  Sterilization & Disinfection.  Antimicrobial definitions.  Factors influence the effectiveness of antimicrobial."

Similar presentations


Ads by Google