Presentation is loading. Please wait.

Presentation is loading. Please wait.

SAMCEF Field applied to Automotive. Creation of an engine model from CAD entities defined using the local parametric modeler of SAMCEF Field.

Published byKatherine Harrison Modified over 8 years ago

Similar presentations

Presentation on theme: "SAMCEF Field applied to Automotive. Creation of an engine model from CAD entities defined using the local parametric modeler of SAMCEF Field."— Presentation transcript:

1 SAMCEF Field applied to Automotive

2 Creation of an engine model from CAD entities defined using the local parametric modeler of SAMCEF Field

3 Hinge joint definition between connecting-rod and crank-shaft

4 Mesh : Topological connections defining rigid bodies and taking kinematical joints into account

5 Rigid Body Model Simulation Detection of a geometrical defect

6 Rigid body model simulation No interference any more

7 Update of mesh with one flexible connecting-rod

8 Automatic connection with rigid components

9 Rigid-flexible Model Simulation Stresses superimposed on motion

10 Rigid-flexible Model Simulation with flexible-flexible contacts Stresses superimposed on Motion

11 SAMCEF Field Integrating CAE towards Professional Solutions Future Notion of components library

12

Download ppt "SAMCEF Field applied to Automotive. Creation of an engine model from CAD entities defined using the local parametric modeler of SAMCEF Field."

Similar presentations

Introduction to CAD/CAM/CAE

Introduction to CAD/CAM/CAE
Vehicle Dynamics & Safety: Multibody System Simulation tools based on MultiBody approach are widespread in vehicle design and testing.

Vehicle Dynamics & Safety: Multibody System Simulation tools based on MultiBody approach are widespread in vehicle design and testing.
Symmetry & boundary conditions Joël Cugnoni, LMAF/EPFL, 2009.

Symmetry & boundary conditions Joël Cugnoni, LMAF/EPFL, 2009.
Automatic Pattern Generation System An Automatic Pattern Fit Solution

Automatic Pattern Generation System An Automatic Pattern Fit Solution
Computer Aided Design and Manufacturing. 2.1 INTRODUCTION 2.2 CONVENTIONAL APPROACH TO DESIGN 2.3 DESCRIPTION OF THE DESIGN PROCESS 2.1 INTRODUCTION 2.2.

Computer Aided Design and Manufacturing. 2.1 INTRODUCTION 2.2 CONVENTIONAL APPROACH TO DESIGN 2.3 DESCRIPTION OF THE DESIGN PROCESS 2.1 INTRODUCTION 2.2.
Neural Network Grasping Controller for Continuum Robots David Braganza, Darren M. Dawson, Ian D. Walker, and Nitendra Nath David Braganza, Darren M. Dawson,

Neural Network Grasping Controller for Continuum Robots David Braganza, Darren M. Dawson, Ian D. Walker, and Nitendra Nath David Braganza, Darren M. Dawson,
Abhyankar Consultancies CAE and Design Consultants.

Abhyankar Consultancies CAE and Design Consultants.
Soul Envoy Final Year Project 22nd April 2006 By Zhu Jinhao.

Soul Envoy Final Year Project 22nd April 2006 By Zhu Jinhao.
Mechanical Engineering Dept.

Mechanical Engineering Dept.
Motion Planning. Basic Topology Definitions  Open set / closed set  Boundary point / interior point / closure  Continuous function  Parametric curve.

Motion Planning. Basic Topology Definitions  Open set / closed set  Boundary point / interior point / closure  Continuous function  Parametric curve.
T.J. Hartnett CSE 704 Seminar Dr. Miller Spring ‘11 EVOLVING CREATURES.

T.J. Hartnett CSE 704 Seminar Dr. Miller Spring ‘11 EVOLVING CREATURES.
Precomputed Solving for j Equality Constraint.

Precomputed Solving for j Equality Constraint.
Revealing Order in Complex Systems through Graph Representations Dr. Offer Shai Department of Mechanics, Materials and Systems Faculty of Engineering Tel-Aviv.

Revealing Order in Complex Systems through Graph Representations Dr. Offer Shai Department of Mechanics, Materials and Systems Faculty of Engineering Tel-Aviv.
34 42 49 51 53 55 57 63 67 69 71 73 77 83 Given Connections Solution 1 2 3 4 5 6 95.

Given Connections Solution
FE Modeling Strategy Decide on details from design Find smallest dimension of interest Pick element types – 1D Beams – 2D Plate or.

FE Modeling Strategy Decide on details from design Find smallest dimension of interest Pick element types – 1D Beams – 2D Plate or.
Visual Crash for DYNA A Powerful Open Environment for LS-DYNA Benefits A complete solution for Crash and Safety simulation that can be coupled with process.

Visual Crash for DYNA A Powerful Open Environment for LS-DYNA Benefits A complete solution for Crash and Safety simulation that can be coupled with process.
P. Nikravesh, AME, U of A Mechanical systemsIntroduction Mechanical Systems This presentation describes some of the fundamental components and definitions.

P. Nikravesh, AME, U of A Mechanical systemsIntroduction Mechanical Systems This presentation describes some of the fundamental components and definitions.
© 2011 Autodesk Case Studies: Simulation Problem Solving for Industrial Machinery and Consumer Product Design Shakeel Mirza Technical Consultant, Simulation.

© 2011 Autodesk Case Studies: Simulation Problem Solving for Industrial Machinery and Consumer Product Design Shakeel Mirza Technical Consultant, Simulation.
3.7. O THER G AME P HYSICS A PPROACHES Overview of other game engine physics approaches.

3.7. O THER G AME P HYSICS A PPROACHES Overview of other game engine physics approaches.
Transforming Knowledge to Structures from Other Engineering Fields by Means of Graph Representations. Dr. Offer Shai and Daniel Rubin Department of Mechanics,

Transforming Knowledge to Structures from Other Engineering Fields by Means of Graph Representations. Dr. Offer Shai and Daniel Rubin Department of Mechanics,

Similar presentations

Ads by Google