1. Solar Power Power derived directly from sunlight Seen elsewhere in nature (plants) We are tapping electromagnetic energy and want to use it for heating or convert it to a useful form, usually electricity Renewable-we won’t run out of sunlight (in its current form) for another 4-4.5 billion years

2. Solar Energy Sun derives its energy from nuclear fusion deep in its core In the core Hydrogen atoms are combining (fusing) to produce helium and energy. Physicists refer to this as Hydrogen burning, though be careful, it is not burning in the usual (chemical) sense. The supply of H in the sun’s core is sufficient to sustain its current rate of H burning for another 4-4.5 billion years

3. Solar Energy The energy is released in the H burning deep in the sun in the form of photons. Here we use the particle description of light, where light is considered a packet of energy called a photon. Photons have energy E=hν or E =hc/λ where ν is the frequency of the light, λ is the wavelength of the light, c is the speed of light (c=3.00x10 8 m/s) and h is Planck’s constant (h=6.626068 × 10 -34 m 2 kg / s)

4. Solar energy The photons take a long time to reach the surface of the sun, about 1 million years. Why? Deep in the sun, the density is very high. The photons travel a very short distance before they are absorbed by an electron in an atom. Normally in an atom, the electrons occupy specific positions relative to the nucleus called energy levels. When the electrons are in the lowest energy levels possible, they are said to be in the ground state. When an electron in an atom absorbs a photon, it gains more energy and moves to a new (higher) energy level. It can only gain a photon with the correct energy to change energy levels. The photon energy must equal the energy difference between two energy levels in the atom.

5. Solar energy But electrons don’t like to be in these higher energy states, so they will emit energy in the form of a photon to drop to a lower energy level.

6. Solar energy So in the sun, the photons emitted by the H burning travel a short distance before they are absorbed by an atom. The atom quickly re-emits the photon, but not necessarily in the same direction it came from. The atom can re-emit the photon in any direction. The photon follows a random looking path on its way out of the sun, called a random walk.

7. Random walk So the photons take this random walk form the core to the surface of the sun. On average, it takes 1 million years before a photon generated in the core leave the surface of the sun. It then takes another 9 minutes to reach the Earth

8. Solar spectrum The photons emitted from the sun have a range of energies, and therefore via Planck’s law a range of frequencies and wavelengths. The distribution of the number of photons (intensity) as a function of wavelength( or frequency or energy) we call a spectrum. The maximum energy is at optical wavelengths

9. Solar Spectrum

10. Energy from the sun We can measure the amount of incoming energy from the sun by something called the solar constant 1,366 watts/m 2 with fluctuations of almost 7% during the year. This measures the energy at all electromagnetic wavelengths at the top of the atmosphere What reaches the ground (where a solar device would be ) is less By the time we take into account the effect of the Earth’s rotation, the different angles of sunlight at different latitudes, we find that the average intensity of sunlight is reduced by ¾. Then you have to consider how much is absorbed in the Earth’s atmosphere, which reduces it further, so only 47% of the average makes it to the surface of the earth, or about 160 watts/m 2 This is for a 24 hour day, averaging over an 8 hour day gets you about 600 Watts/m 2 or 1520 BTU/ft 2. This is often referred to to as the solar insolation (varies from 300 in the winter months to 1000 in the summer- why?).

11. How much makes it through the atmosphere

12. Why a seasonal variation? First, why do we have seasons? Earth’s axis is tilted 23.5° to the plane of its orbit

13. Why such a large seasonal variation In the Northern hemisphere, the sun’s rays fall more directly on the earth than in the winter. Heating is most efficient when the suns rays strike the surface ay 90° (right)angles. So a solar energy device should be oriented so that the sun’s rays hit it at right angles.

14. How is energy transferred Convection-Energy is carried by blobs of material that are moving in a medium for example -hot air rises, cold air sinks Conduction-energy transfer between two objects that are in contact Radiative transfer-energy transferred through the successive absorptions and emission of photons

15. Types of solar heating and cooling Active Use a fluid forced through a collector Need an external energy source to drive a pump Passive Design the structure to make use of the incident solar radiation for heating and cooling No external energy source

16. Active Solar heating Used for space and or water heating Flat plate collector system

17. Elements of a flat plate collector Cover (also called glazing) protects the system and keeps heat in. Absorber plate-absorbs solar energy. Usually made of a metal that is a good conductor of heat such as aluminum or copper and painted with a coating that helps absorb and retain the heat (black paint is the lowest order of these types of coatings) Insulation on the bottom and sides to reduce heat losses. Flow tubes –air or fluid to be heated flows though these tubes

18. How does this work? Cover is transparent to sunlight, so the light passes through the cover to the absorber. The absorber will absorb energy from the sunlight and then try to re-emit it to come into thermal equilibrium with its surroundings. But the absorber re-emits the energy at infrared wavelengths. Glass allows visible but not infrared radiation to pass through, so the energy emitted by the absorber is absorbed by the glass. The glass re-emits this energy to the outside air and back into the collector. The energy trapped in the collector heats the inside of the collector, and this energy is transferred to the air or fluid in the tubes via conduction

19. How does this work? The energy emitted from a hot surface is described by Stefan’s Law: P/A = εσT 4 Where ε is the emissivity (describes the degree to which a source emits radiation, ranges from 0 (no emission) to 1 (a perfect emitter) and σ is the Stephan-Boltzman constant = 5.67 x 10 -8 W/m 2 K 4. P/A is the power emitted per unit area, T is the temperature in Kelvin.

20. How does this work? The wavelength at which this energy is emitted from the surface is described by the Wien Displacement Law: λ max (μm)= 2898 T(K) This gives the wavelength at which an object emits the maximum amount of energy

21. Types of flat plate collectors Liquid flat-plate collectors heat liquid as it flows through tubes in or adjacent to the absorber plate. Often unglazed

22. Types of Flat plate collectors Air flat-plate collectors – used for solar space heating. The absorber plates in air collectors can be metal sheets, layers of screen, or non-metallic materials. The air flows past the absorber by using natural convection or a fan. air conducts heat much less readily than liquid does, less heat is transferred from an air collector's absorber than from a liquid collector's absorber, and air collectors are typically less efficient than liquid collectors

23. Types of Flat Plate Collectors Evacuated Tube collectors -usually made of parallel rows of transparent glass tubes. Each tube contains a glass outer tube and metal absorber tube attached to a fin. The fin is covered with a coating that absorbs solar energy well, but which inhibits radiative heat loss. Air is removed, or evacuated, from the space between the two glass tubes to form a vacuum, which eliminates conductive and convective heat loss. Evacuated-tube collectors can achieve extremely high temperatures (170°F to 350°F), making them more appropriate for cooling applications and commercial and industrial application. However, evacuated- tube collectors are more expensive than flat- plate collectors, with unit area costs about twice that of flat-plate collectors.

24. Limitations Need a storage system for cloudy days and nights. Amount of solar energy that is usefully collected is 50%. To heat 100 gallons of water a day from a temperature of 50° to 120° you need a collector with a surface area of 112 square feet. That is one panel 9 ft x 14 ft. This would fill a good portion of our classroom Where do you put it? In the back yard, on the roof? Are there structural, aesthetic considerations? (Al Gore’s troubles with installing solar panels)