1. Volumes By Cylindrical Shells Objective: To develop another method to find volume without known cross-sections.

2. Cylindrical Shells 7.3.1 Problem Let f be continuous and nonnegative on [a, b] (0 < a < b), and let R be the region that is bounded above by y = f(x), below by the x-axis, and on the sides by the lines x = a and x = b. Find the volume V of the solid of revolution S that is generated by revolving the region R about the y-axis.

3. Cylindrical Shells Sometimes problems of the above type can be solved by the method of disks or washers perpendicular to the y-axis, but when that method is not applicable or the resulting integral is difficult, the method of cylindrical shells, which we will discuss now is a good option.

4. Cylindrical Shells A cylindrical shell is a solid enclosed by two concentric right circular cylinders. The volume V of a cylindrical shell with inner radius r 1, outer radius r 2, and height h can be written as V = [area of a cross section][height]

5. Cylindrical Shells A cylindrical shell is a solid enclosed by two concentric right circular cylinders. The volume V of a cylindrical shell with inner radius r 1, outer radius r 2, and height h can be written as is the average radius and is the thickness

6. Cylindrical Shells When using cylindrical shells, the underlying idea is to divide the interval [a, b] into n subintervals, thereby subdividing the region R into n strips, R 1, R 2, …,R n. When the region is revolved around the y-axis, these strips generate “tube-like” solids S 1, S 2, …, S n that are nested one inside the other and together comprise the entire solid S. The volume V of the solid can be obtained by adding together the volumes of the tubes; that is,

7. Cylindrical Shells As a rule, the tubes will have curved upper surfaces, so there will be no simple formulas for their volumes. However, if the strips are thin, then we can approximate each strip by a rectangle. These rectangles, when revolved about the y-axis, will produce cylindrical shells whose volumes closely approximate the volumes of the tubes generated by the original strips. We will show that by adding the volumes of the cylindrical shells we can obtain a Riemann Sum that approximates the volume V, and by taking the limit of the Riemann Sums we can obtain an integral for the exact value.

8. Cylindrical Shells To implement this idea, suppose that the k th strip extends from x k-1 to x k and that the width of the strip is. If we let be the midpoint of the interval, and if we construct a rectangle of height over the interval, then revolving this rectangle about the y-axis produces a cylindrical shell of average radius, height, and thickness. From, the volume is

9. Cylindrical Shells Adding the volumes of the n cylindrical shells yields the following Riemann Sum that approximates the volume V:

10. Cylindrical Shells Adding the volumes of the n cylindrical shells yields the following Riemann Sum that approximates the volume V: Taking the limit as n increases and the widths of the subintervals approach zero yields the definite integral

11. Volume by Cylindrical Shells 7.3.2 Let f be continuous and nonnegative on [a, b] (0 < a < b), and let R be the region that is bounded above by y = f(x), below by the x-axis, and on the sides by the lines x = a and x = b. Then the volume V of the solid of revolution that is generated by revolving the region R about the y-axis is given by

12. Example 1a Find the volume of the solid generated when the region enclosed between the curves and the x-axis is revolved about the y-axis.

13. Example 1a Find the volume of the solid generated when the region enclosed between the curves and the x-axis is revolved about the y-axis. The “right curve” is always x = 4. However, the “left curve” is x = 1 from 0-1, and it is x = y 2 from 1-2.

14. Example 1a Find the volume of the solid generated when the region enclosed between the curves and the x-axis is revolved about the y-axis. The “right curve” is always x = 4. However, the “left curve” is x = 1 from 0-1, and it is x = y 2 from 1-2.

15. Example 1b Use cylindrical shells to find the volume of the solid generated when the region enclosed between the curves and the x-axis is revolved about the y-axis.

16. Example 1b Use cylindrical shells to find the volume of the solid generated when the region enclosed between the curves and the x-axis is revolved about the y-axis.

17. Example 2a Find the volume of the solid generated when the region R in the first quadrant enclosed between y = x and y = x 2 is revolved about the y-axis.

18. Example 2a Find the volume of the solid generated when the region R in the first quadrant enclosed between y = x and y = x 2 is revolved about the y-axis.

19. Example 2b Use cylindrical shells to find the volume of the solid generated when the region R in the first quadrant enclosed between y = x and y = x 2 is revolved about the y-axis.

20. Example 2b Use cylindrical shells to find the volume of the solid generated when the region R in the first quadrant enclosed between y = x and y = x 2 is revolved about the y-axis. As you can see, the cross section of R parallel to the y-axis generates a cylindrical surface of height x – x 2 and radius x.

21. Example 3 Use cylindrical shells to find the volume of the solid generated when the region R under y = x 2 over the interval [0, 2] is revolved about the line y = -1.

22. Example 3 Use cylindrical shells to find the volume of the solid generated when the region R under y = x 2 over the interval [0, 2] is revolved about the line y = -1. As illustrated in the figure, at each y in the interval 0 < y < 4, the cross section of R parallel to the x-axis generates a cylindrical surface of height and radius y + 1.

23. Example 3 Use cylindrical shells to find the volume of the solid generated when the region R under y = x 2 over the interval [0, 2] is revolved about the line y = -1. As illustrated in the figure, at each y in the interval 0 < y < 4, the cross section of R parallel to the x-axis generates a cylindrical surface of height and radius y + 1.

24. Homework Page 464 5, 7, 13, 15, 23