1. LABELING PRESENTATION BY WES WILDCAT WILDCAT PRODUCTION

2. STANDARD LABEL THAT GOES FROM SWITCH PATCH PANELS TO REMOTE PATCH PANELS

3. STANDARD FIBER LABEL

4. STANDARD LABEL THAT GOES FROM REMOTE PATCH PANEL TO EQUIPMENT

5. STANDARD RACK LABEL

6. STANDARD RACK LABEL FOR ROOM GRID

7. STANDARD LABEL FOR REMOTE PATCH PANELS

8. STANDARD FIBER PATCH PANEL LABEL

9. STANDARD LABEL FOR WALL PLATES

10. CARD FOR INSIDE THE OLD SIEMON WALLPLATES

11. LABEL FOR EQUIPMENT IN THE RACKS

12. SWITCH INFORMATION ON EQUIPMENT

13. INFORMATION USED FOR WALLMOUNTS

14. LABEL FOR PHONE PANELS OR CALLED 110 AND 66 BLOCKS

15. EXAMPLE OF A LABEL WITH TOO MUCH INFO

16. LABELS WITH ORIGINAL NAME AND EQUIPMENT NAME

17. USING EQUIPMENT NAME MAKES SMALLER LABEL

18. LABEL FOR EQUIPMENT THAT DON’T BELONG TO NETS LIKE IN ML-MR AND CG2

19. NEW STYLE PATCH PANELS IN CG1 AND FL0

20. UPSIDEDOWN LABEL

21. SHARPIE USED INSTEAD OF REPLACING LABEL

22. OLD LABEL NOT REMOVED

23. PEN USED INSTEAD OF REPLACING TEMPLATE

24. INFORMATION I NEED IS THE LOCATION SWITCH NAME AND SWITCH PORTS

25. LABELING INFO FROM NETWORK TO WALLPLATE

26. INFORMATION I NEED

27. THANK YOU!

28. FOLLOW UP 1.ARE FIBER PORTS TO BE LABELED BY PAIR OR BY PORTS? 2. SHOULD FIBER PANELS BY LABELED BY NUMBERS OR BY ALPHA? 3. DO WE USE A COLON OR SLASH ON EQUIPMENT LABELS. Ex, 3:7 OR 3/7 4. SHOULD GROUP NAME GO ON LABELS ON EQUIPMENT THAT DON’T BELONG TO NETS? Ex, R4-HURON OR R4-DSG/HURON