Presentation is loading. Please wait.

Presentation is loading. Please wait.

Electric Current, Resistance and Ohm’s Law

Similar presentations


Presentation on theme: "Electric Current, Resistance and Ohm’s Law"— Presentation transcript:

1 Electric Current, Resistance and Ohm’s Law

2 Electric Current Electric current is a measure of the rate at which electric charges move past a given point in a circuit. The metric SI unit used to measure electric current is the ampere. The symbol for the ampere is A. Current is measured using an ammeter connected to the circuit in series.

3 Electric Resistance The molecules of all types of conductors impede, or resist, the flow of electrons to some extent. This ability to impede the flow of electrons in conductors is called electrical resistance. Some kinds of electrical devices used in circuits are designed to impede current flow and are called resistors. The symbol for electrical resistance is R, and the SI unit is the ohm (Ω).

4 Potential Difference When electrons flow through a conductor, the electrical resistance causes a loss of electric potential (voltage). There is a “difference” in the amount of electric potential after the electrons have flowed through the conductor. Physicists refer to this loss as electric potential difference, or more simply, potential difference.

5 Ohm’s Law Ohm’s law states that the potential difference between two points on a conductor is proportional (directly related) to the electric current flowing through the conductor. The factor that relates the potential difference to the current is the resistance of the conductor or load. Although potential difference is the correct term, the term voltage drop is commonly used instead. Voltage is lost or is “dropped” across the conductor.

6 Ohm’s Law Formula V = I x R
Potential Difference =Electric Current x Electrical Resistance   V = I x R Where potential difference (voltage drop) (V) is measured in volts (V), electric current (I) is measured in amperes (A), and resistance (R) is measured in ohms (Ω).  The formula is often written like this:

7 Steps For Solving Science Problems Involving Formulas
Step 1: Read the problem carefully and identify the data given. Step 2: Write the formula(s) related to the problem. Step 3: Substitute the known values of given quantities. Step 4: Calculate the numerical answer (with units). Step 5: Write an answer statement in sentence form.

8 Problem 1 What is the voltage drop across the tungsten filament in a 100 W light bulb? The resistance of the filament is 144 Ω and a current of A is flowing through it.

9 Problem 2 An electric toaster is connected to a 120 V outlet in the kitchen. If the heating element in the toaster has a resistance of 14 Ω, calculate the current flowing through it.

10 Problem 3 The current required to operate an electric can opener is 1.5 A. What is its resistance if the supply voltage is 120 V?


Download ppt "Electric Current, Resistance and Ohm’s Law"

Similar presentations


Ads by Google