1. Students: Chen-Jay Xu Zheng-Xian Hung Advisor: Ru-Li Lin

2. 1 What is Four aircraft 2 Four aircraft structure 3 Four aircraft control 4 Four aircraft principle 5 Four aircraft use 6 Four aircraft worries 7Comparison of multi-axis aircraft 8Conclusion 9Literature

3. Four aircraft is a multi-axis aircraft with four rotors to floating and propulsion flight. Fixed-wing aircraft and different, it by rotating rotor aircraft took off. Its four rotors the same size, distribution symmetrical position. By adjusting the relative speed between the different rotor to adjust torque, stability control aircraft flying, rotating or turning.

4. Early aircraft design, four aircraft were used to solve the problem of torque rotorcraft. Main and auxiliary rotor torque design can solve the problem, but not the sub rotor to provide lift and low efficiency. So Four aircraft were the first batch of heavier than air VTOL aircraft. But the earlier model performance is poor, difficult to manipulate and larger.

5. Four aircraft have recently gained a new life in the UAV field. The use of electronic control systems and electronic sensors, four aircraft flight stability, flexible manipulation. Can be used indoors and outdoors, four aircraft, small size, light weight, easy to carry.

6. Propeller The control circuit board Battery Brushless Motor Stand

7. Four aircraft control flow chart Android cellphone Remote system Control system Brushless Motor Electronic transmission Easy lifting mechanism

8. 1 receiver (Bluetooth module, four groups with R2004GF moving remote control receivers, etc...)

9. The control circuit (APM2.5 flight control board, Ardino UNO, etc....)

10. Electric Speed ​​ Controler, ESC Require high current to start the motor, it is not with the same power supply control circuit, Furthermore, the control circuit and the intermediate motor needs a "PWM digital signal and pure electric." Conversion bridge.

11. Brushless Motor

12. There are four rotor aircraft in space six degrees of freedom (along the three axes respectively for translational and rotational motion), the six degrees of freedom can be controlled by adjusting the motor speed to achieve different. The basic state of motion are: (1) vertical movement; (2) pitching motion; (3) roll movement; (4) yaw movement; (5) before and after exercise; (6) lateral movement

13. (1) vertical movement

14. (2) pitching motion

15. (3) roll movement

16. (4) yaw movement

17. (5) before and after exercise

18. (6) lateral movement

19. + = ?

20. 1 aerial photography (photography, investigation, etc....)

21. Four aircraft empty filming

22. + = ?

23. Cargo transport (commercial, emergency, etc....)

24. Amazon push UAV Courier

25. 1 Four aircraft flying (affecting flight)

26. 2 Four aircraft photographed (Privacy)

27. AxisThree aircraftFour aircraft Picture Compare 1.Each shaft has a rotational speed of each axis. 2.When side fly, subject to calculate the lateral force. 1.Shaft speed is symmetrical, a group of two. 2.When flying side, only one axis control motor speed.

28. Four aircraft is a product of modern science and technology under the... Each product of demand generation are being manufactured, It has a lot of room for improvement, but also a very wide use Many uses, to see how the needs of those who use Hello This highly functional products, is looking forward to the convenience it brings

29. Wikipedia http://zh.wikipedia.org/wiki/%E5%9B%9B%E8%BD%B4%E9 %A3%9E%E8%A1%8C%E5%99%A8#1 http://zh.wikipedia.org/wiki/%E5%9B%9B%E8%BD%B4%E9 %A3%9E%E8%A1%8C%E5%99%A8#1 http://www.shs.edu.tw/works/essay/2013/11/20131114193 52712.pdf http://www.shs.edu.tw/works/essay/2013/11/20131114193 52712.pdf http://goods.ruten.com.tw/item/show?21301169449011 http://ardutwfans.blogspot.tw/2012/06/blog-post.html