1. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Overview 0 、 introduction 1 、 what is feedback? 2 、 why we need feedback in our circuit? 3 、 how many types of feedback? 4 、 how many types of negative feedback? 5 、 how to judge all kinds of negative feedback? 6 、 advantages of negative feedback? 7 、 how to analyse the negative feedback circuit? 8 、 conclusion----- assignment

2. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic introduction An audio-frequency amplifier can be designed to have a certain current, voltage or power gain together with particular values of input and output impedance. The amplifier will add noise and distortion to the signals. The components employed in the amplifier, both passive (resistors, capacitors, etc.) and active (transistors and f.e.t.s), will vary in value with both time and change in temperature and will have manufacturing tolerances.

3. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic introduction The gain of the amplifier may therefore vary with time, with change in ambient temperature, and when a component has to be replaced by another of the Same type. (manufacturing tolerances) Any fluctuations in the power supply may also cause the gain of the amplifier to alter.

4. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic feedback 1 、 what is feedback? 2 、 For many applications a more or less constant gain iS necessary ， and this can be obtained if negative feedback (n.f.b.) iS applied to the amplifier, at the expense, however,of a reduction in gain.

5. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Openloop circuit 、 gain without n.f.b 、 A Closeloop circuit 、 gain with n.f.b 、 A f 、 F(feedback factor) 1+AF (feedback depth)

6. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic why we need feedback in our circuit? 1 、 feedback make our circuit stabilization: Quiescent operation point; Stability of gain: current gain, voltage gain; Decrease non-linearity distortion Reduces noise Change input and output impedance Band spread Reduces amplitude ／ frequency distortion 2 、 generate oscillation (oscilloscope)

7. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Types of feedback 0 、 d.c feedback 1 、 a.c. feedback 2 、 positive feedback 3 、 negative feedback 4 、 voltage feedback 5 、 current feedback 6 、 Series feedback 7 、 parallel feedback

8. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic D.C. and A.C. feedback

9. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Negative and Positive feedback

10. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic

11. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Negative and Positive feedback Conclusion: If the Input point---feedback point at the same terminal: And same polarity==positive feedback And different polarity==nagtive feedback If the input point---feedback point at the different terminal: And same polarity==negative feedback And different polarity==positive feedback

12. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Voltage and Current feedback Conclusion: If the output point---sampling point at the same terminal: =voltage feedback If the output point---sampling point at the different terminal: =current feedback

13. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Series and parallel feedback Conclusion: If the feedback point--input point at the same terminal: =parallel feedback If the feedback point--input point at the different terminal: =series feedback

14. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Conclusion Input point--feedback point--sample point--output point

15. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic a.c. negative feedback -----voltage and current\series and parallel An n.f.b. amplifier has a fraction of its output signal feed back into its input terminals in antiphase with the input signal. four types ： voltage-voltage feedback, (series-voltage feedback) voltage-current feedback, (series-current feedback) current-current feedback. (parallel-current feedback) current-voltage feedback. (parallel-voltage feedback)

16. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Voltage-Voltage Feedback (Series-voltage Feedback)

17. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Voltage gain with n.f.b.

18. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic EXAMPLE 4.1 A voltage amplifier has a voltage gain of 100 before n.f.b.is applied.Calculate its voltage gain if 3/100 of the output voltage is fed back to the input in antiphase with the input signal Solution: From equation(4.1),

19. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic The voltage gain of a transistor amplifier without n.f.b.iS The effective load resistance R L (eff) seen by the transistor in an emitter follower circuit iS the resultant of the emitter resistor R3 in parallel with the external load resistance RL.The voltage gain of an emitter follower is

20. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Voltage-Current Feedback(Series-current Feedback)

21. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic When voltage-current feedback is applied to an amplifier the fed- back voltage is proportional to the current-flowing in the load.

22. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic EXAMPLE 4.5 An amplifier of the type shown in Fig.4.8b has the following data:R2=4.7 kΩ,R3=1 kΩand gm=5 mS.Calculate the voltage gain of the circuit. Solution From equation(4.6)

23. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Current-Current Feedback(parallel-Current Feedback)

24. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic

25. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Current-Voltage Feedback （ parallel-voltage Feedback)

26. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic

27. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic EXAMPLE 4.6 Calculate the current gain of the circuit shown in Fig.4.12a if the current gain of the transistor is 120. Solution The feedback factor is (Ans.) Therefore Current gain with feedback (Ans.)

28. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic

29. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Review

30. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic advantages of negative feedback? 4.3.1. stability of gain 4.3.2.input and output impedance 4.3.3.amplitude/frequency distortion 4.3.4. non-linearity distortion

31. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Conclusion Input point--feedback point--sample point--output point

32. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic EXAMPLE 4.7 An amplifier has a voltage gain of 1000.If 3 ／ 100 of the output voltage IS applied as negative feedback,calculate the change in overall gain if the gain before feedback falls by 50 ％. Solution Gain with feedback,inherent gain being 1000. New gain with feedback,inherent gain having been reduced to 500.

33. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Therefore Change in gain (Ans.) Thus a 50 ％ fall in the inherent gain of the amplifier results in only a 3.13 ％ change in the overall gain.

34. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic If the loop gain is much larger than unity then equations(4.1)and(4.8)become It is evident that, if, the gain of the amplifier iS merely a function of the feedback circuit and iS quite independent of the characteristics of the amplifier itself.Any changes in the performance of the amplifier will not now affect the overall gain.

35. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic resistance-capacitance feedback network is chosen to have a loss ／ frequency characteristic

36. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Input and output impedances The application of negative feedback to an amplifier alters its input and output impedances.Each impedance may be either increased or decreased depending on the type of feedback used ； see Table 4.1.

37. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Amplitude ／ Frequency Distortion for example,the gain of an R-C coupled amplifier falls off at both high and low frequentcles because of capacitive effects.The application of negative feedback to an amplifier reduces change in its gain and thereby reduces amplitude ／ frequency distortion.Fig.4.14

38. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Clearly the feed-back has made the amplifier gain much‘‘flatter” over most of the frequency band.At high and low frequencies, however,the loop gain is not much greater than unity(because the gain A has fallen)and the effect of the feedback is reduced. this means that the 3 dB bandwidth of the amplifier has been increased by the applied negative feedback.An increase in the upper 3 dB frequency can be obtained by the use of frequency-sensitive feedback.

39. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic Non-linearity Distortion For example,suppose the input signal contains frequencies,f1 and f2.If the output signal has components at 2f1,2f2,3f1,3f2,etc.,harmonic distortion has occurred ； if components at 2f1 士 f2, f1 士 2f2, etc.,exist inter-modulation distortion iS present.Often both harmonic and intermodulation distortion occur at the same time.

40. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic EXAMPLE 4.8 An amplifier has a voltage gain of 50 dB.Find the change in the gain if 1/50 of the output voltage is fed back into the input in opposition to the input signal.What is then the reduction in harmonic distortion at the output of the amplifier? Phase shift in the amplifier and the feedback path may be neglected. Solution Equation(4.1)is

41. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic 50=20 log l0 (voltage ratio) 50 ／ 20=2.5=log l0( voltage ratio) Taking antilogl0 of sides 316.2=voltage ratio Therefore times=32.7dB so that Change in gain=50-32.7=17.3 dB (Ans.) From equation(4.12),the reduction in harmonic distortion is 1/(1+(316.2/50))=1/7.32=0.137times (Ans.)

42. Electronics chapter 4 negative feedback Guangdong Institute of Education ---BTEC electronic