Presentation is loading. Please wait.

Presentation is loading. Please wait.

LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Space available in tunnel Y. Muttoni.

Published byGertrude Higgins Modified over 8 years ago

Similar presentations

Presentation on theme: "LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Space available in tunnel Y. Muttoni."— Presentation transcript:

1 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Space available in tunnel Y. Muttoni

2 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Overview Geographical location Study inputs and limitations Equipment in place UJ14 Study implantation new equipment UJ14 Equipment in place RZ54-USC55 Equipment in place UJ56 Conclusion

3 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Geographical location

4 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Geographical location USC55

5 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Equipment (compared to existing solution). Add energy extraction (DQR-DQS). Electrical feed box outside beam. Warm magnet or cold D1 magnet with surface powering assumed for current study. Limit Implantation studied around Pt1 in UJ14 (UJ16 symmetrical). Electrical feed box like DFBL used, DSL (Superconducting bus bar line) and QRLX (Cryogenic line extension) should be necessary. In future new DQR (not mechanical but semiconductor) should be studied (K. Dahlerup-Petersen/R. Denz). Implantation around Pt5 did not study but kept in mind. Study inputs and limitations

6 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Study inputs and limitations

7 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Point 1

8 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Equipment in place UJ14

9 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Equipment in place UJ14

10 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Equipment in place UJ14 Access control Removable Sector wire fencing removable

11 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Equipment in place UJ14

12 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Equipment in place UJ14 UL14 IP1 Access control Removable

13 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Equipment in place UJ14 UJ14 IP1 UJ13 Space reserved for transport

14 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Equipment in place UJ14 UJ14 1 st floor IP1 UJ13 UTA

15 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 New equipment in UJ14

16 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 New equipment in UJ14

17 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 New equipment in UJ14 DFBL 2x13KA 6x600A 2x120A

18 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 New equipment in UJ14 Cryogenic link Electrical link Routing link should be studied more in detail

19 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 New equipment in UJ14 Holes through shielding wall

20 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 New equipment in UJ14

21 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 New equipment in UJ14

22 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 New equipment in UJ14 D1 cold Cryogenic link Electrical link

23 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Point 5

24 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Equipment in place RZ54-USC55

25 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Equipment in place RZ54-USC55

26 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Typical cross section in R542

27 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Equipment in place UJ56

28 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Equipment in place UJ56

29 LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Conclusion D1 cold: Increases the number of racks underground, necessary to find place for DFBL. Choice DFBM in main tunnel: More space in service cavern but in point 5 small tunnel to install DFBM. Not necessary to have cryogenic link and electrical link Not necessary to drill new hole in the shielding wall. New rack layout New cable routing required. New water pipe routing required. Audit of rack use required with all owners (optimize space?). New energy extraction Required for space constraints Checking metallic structure. Future integration studies More progress with P1 design (components and layout) before progressing with P5 studies

Download ppt "LHC Insertions Upgrade Working Group (LIUWG) 20-03-2008 Space available in tunnel Y. Muttoni."

Similar presentations

The HiLumi LHC Design Study (a sub-system of HL-LHC) is co-funded by the European Commission within the Framework Programme 7 Capacities Specific Programme,

The HiLumi LHC Design Study (a sub-system of HL-LHC) is co-funded by the European Commission within the Framework Programme 7 Capacities Specific Programme,
Electrical wiring for piezo movers piezo power supply strain gauges readout temperature probes 1 Frédéric BOGARD – LAL/IN2P3/CNRS – Jan 25, 2013 Electrical.

Electrical wiring for piezo movers piezo power supply strain gauges readout temperature probes 1 Frédéric BOGARD – LAL/IN2P3/CNRS – Jan 25, 2013 Electrical.
19th – 20th of September 2007Cryogenic Expert Meeting at GSI, Jan Patrick Meier1/11 Cryogenic Experts Meeting at GSI, 2007 The SIS 100 Cryogenic Jumper.

19th – 20th of September 2007Cryogenic Expert Meeting at GSI, Jan Patrick Meier1/11 Cryogenic Experts Meeting at GSI, 2007 The SIS 100 Cryogenic Jumper.
A. Ballarino, 21/11/2014 Wrap up from WP6 A. Ballarino for the WP6 CERN, Geneva KEK, 21 st November 2014 16 th Hi-Lumi LHC Extended Steering Committee.

A. Ballarino, 21/11/2014 Wrap up from WP6 A. Ballarino for the WP6 CERN, Geneva KEK, 21 st November th Hi-Lumi LHC Extended Steering Committee.
Cold Powering of the HL-LHC magnet system WP6 Motivation Work Package description Tasks Partners & resources Amalia Ballarino HL-LHC Design Study – 3 rd.

Cold Powering of the HL-LHC magnet system WP6 Motivation Work Package description Tasks Partners & resources Amalia Ballarino HL-LHC Design Study – 3 rd.
MODULE TRANSPORT CLIC Module Working Group 27 September 2010 Keith Kershaw CERN EN-HE.

MODULE TRANSPORT CLIC Module Working Group 27 September 2010 Keith Kershaw CERN EN-HE.
MICE: Hall Infrastructure Chris Nelson CEng CM16 8 th Oct 2006.

MICE: Hall Infrastructure Chris Nelson CEng CM16 8 th Oct 2006.
13 March 20061 MERcury Intense Target (MERIT) Experiment Layout A.Fabich for CERN AB-ATB.

13 March MERcury Intense Target (MERIT) Experiment Layout A.Fabich for CERN AB-ATB.
Crab Cavities in IR1 and IR5 Some considerations on tunnel integration What will be the situation in the tunnel after the LHC IR Phase-1 Upgrade. What.

Crab Cavities in IR1 and IR5 Some considerations on tunnel integration What will be the situation in the tunnel after the LHC IR Phase-1 Upgrade. What.
HLTC 15 th April 2014 EDMS:1374785 Y. Muttoni EN-MEF-INT with the contribution of P. Fessia.

HLTC 15 th April 2014 EDMS: Y. Muttoni EN-MEF-INT with the contribution of P. Fessia.
1 Presented at ColUSM by D. Ramos on behalf of the Cold Collimator Feasibility Study Working Group https://espace.cern.ch/CCFS/default.aspx Longitudinal.

1 Presented at ColUSM by D. Ramos on behalf of the Cold Collimator Feasibility Study Working Group Longitudinal.
The HiLumi LHC Design Study (a sub-system of HL-LHC) is co-funded by the European Commission within the Framework Programme 7 Capacities Specific Programme,

The HiLumi LHC Design Study (a sub-system of HL-LHC) is co-funded by the European Commission within the Framework Programme 7 Capacities Specific Programme,
Prospects of SC Quadrupole Production at IHEP-Protvino The 2nd Institutes Meeting on International Construction of the FAIR Accelerator Complex Protvino,

Prospects of SC Quadrupole Production at IHEP-Protvino The 2nd Institutes Meeting on International Construction of the FAIR Accelerator Complex Protvino,
First Considerations on CLIC Cooling System Ch. Martel, J. Inigo-Golfin TS/CV.

First Considerations on CLIC Cooling System Ch. Martel, J. Inigo-Golfin TS/CV.
June 2004 Andrea Gaddi, PH-CMI USC Installation Commissioning Task Force 1st Run Meeting, June 3rd, 2004.

June 2004 Andrea Gaddi, PH-CMI USC Installation Commissioning Task Force 1st Run Meeting, June 3rd, 2004.
The HiLumi LHC Design Study (a sub-system of HL-LHC) is co-funded by the European Commission within the Framework Programme 7 Capacities Specific Programme,

The HiLumi LHC Design Study (a sub-system of HL-LHC) is co-funded by the European Commission within the Framework Programme 7 Capacities Specific Programme,
FP 420 Connection Cryostat Design and Integration Keith Potter, Jaak Lippmaa, Guido Ryckwaert, Benoit Florin, Thierry Renaglia, Thierry Colombet, Shrikant.

FP 420 Connection Cryostat Design and Integration Keith Potter, Jaak Lippmaa, Guido Ryckwaert, Benoit Florin, Thierry Renaglia, Thierry Colombet, Shrikant.
Magnetic Shielding Issues Roy Preece STFC - RAL. Overview Issues Items in harms way – Step IV Step IV mitigation plan –Racks –Compressors Current / Future.

Magnetic Shielding Issues Roy Preece STFC - RAL. Overview Issues Items in harms way – Step IV Step IV mitigation plan –Racks –Compressors Current / Future.
David Nisbet – LIUWG 17 th July 2008 LIUWG – Options for Powering Phase I David Nisbet Summary of points from LIUWG 7 Existing topology Future topology.

David Nisbet – LIUWG 17 th July 2008 LIUWG – Options for Powering Phase I David Nisbet Summary of points from LIUWG 7 Existing topology Future topology.
The HiLumi LHC Design Study is included in the High Luminosity LHC project and is partly funded by the European Commission within the Framework Programme.

The HiLumi LHC Design Study is included in the High Luminosity LHC project and is partly funded by the European Commission within the Framework Programme.

Similar presentations

Ads by Google