1. Digi-Pow Wireless Power meter By: Kellen Denny Eric Iraheta Email: kellendenny@ufl.edu eiraheta@ufl.edu Phone: 850-212-5989 954-232-4721 EEL4924 – Senior Design

2. Schematics (TX side)

3. Schematics (RX side)

4. Obstacles Trouble reducing overall circuit size within packaging Debouncing push-button switches Correct operation of dual power-supply for remote device Analog front end DC bias offset Bitmap image usage in LCD screen Solutions Usage of capacitive power supply; only monitoring current on live line Usage of RC circuit with pull down resistor Usage of diodes to isolate power from either batteries or the wall Implemented simple software DC filter Created/worked with a MATLAB function to collect data from an image

5. Implementations TX Side Two processes: Foreground and Background. Foreground runs the initializations and the calculations on one second span of samples. Background process is triggered every time the ADC has a sample. Accumulates values into registers. Notifies foreground when one second of samples is collected. Foreground sends final calculated data via UART to the remote receiver RX Side Dual power supply capability (Wall outlet or AAA batteries) Push-button switches send signal as to which data is being asked for Receives data from XBee via UART interface Data is collected and distributed with the help of arrays via software Final data collected is then displayed on LCD screen; drawn pixel-by-pixel with the help of LCD driver library created in Code Composer Studio

6. Final Packaging