1. SMS Module Model ： SB-DN-SMS/IP Configuration of SMS Module

2. Device: SMS Module Product:SMS Module Model: SB-DN-SMS/IP Power supply:200mA/24VDC Card:Standard GSM card TCP/IP port:S-BUS/IP switch function Interface:S-BUS Installation:35mm DIN-RailSize:144×88×66(mm) Main Technical Parameters SMS control （ 99*49 targets ） Status examination Sensor alarm （ SMS and telephone for burglar prevention ） brightness Adjustable LED background Timing arm and disarm Soft reset function without power interruption Remote program and management function SMS, S-BUS, Ethernet data exchange Configuration of SMS Module

3. SMS Module 25 ℃ Smart-BUS Configuration of SMS Module Controlled devices

4. After completing correct connection, make your computer's IP address settings and SMS module's IP address in the same segment. Such as: SMS module's IP address: 192.168.10.5, then the computer's IP should be set to: 192.168.10.X, X can be the figures that have not be used in the network. After that the correct IP address settings and normal communication, power off The module and insert the SIM card into the module and then power on. run SMS configuration software and search online SMS module by s-bus software. Configuration of SMS Module Insert SIM card

5. SMS module configuration software interface Programming 2. Set the national code number, such as China: 86 You can find in the internet 1. Fill Msg center Warning: These steps are very important. It need correctly setup to gain all the functions.

6. Programming 3.Setup the control object 6. Save before quit 1. Click “read” to read current settings 2. Edit control commands Note : uppercase and lowercase are different If the SMS module received a right message, it will run the related group of targets

7. Programming Set control Phone number for SMS module: when enable the number check, only the number in upper list can control the current output group; when disabled, all number can control the current output group Enable to send a feedback message to the controlling Phone 1. Input the administrator Remarks and mobile number Each group’s modification need a Save.

8. Programming Another way of controlling SMS module: fixed format of message Example of Message format Setting the verify Control phone number list Only that phone number can control.

9. Programming By universal switch command, we can control SMS module to send differ information (e.g. Alarm) to appointed cell phone. 1.Edit report group( Maximum group number: 24) 2.Edit receive number and content for each report group. 3. Each group’s modification need a Save.

10. Programming Enable to broadcast received MSG (If necessary) Enable phone number check