Presentation is loading. Please wait.

Presentation is loading. Please wait.

Physical interpretation of DC and non-DC components of moment tensors Václav Vavryčuk Institute of Geophysics, Prague.

Published byBaldric Mills Modified over 8 years ago

Similar presentations

Presentation on theme: "Physical interpretation of DC and non-DC components of moment tensors Václav Vavryčuk Institute of Geophysics, Prague."— Presentation transcript:

1 Physical interpretation of DC and non-DC components of moment tensors Václav Vavryčuk Institute of Geophysics, Prague

2 MT for simple types of seismic sources

3 Explosive (implosive) source
Source process Force equivalent Moment tensor explosion three linear dipoles implosion

4 Shear faulting Source process Force equivalent Moment tensor no torque
double-couple (quadrupole)

5 Pure tensile faulting Source process Force equivalent Moment tensor
opening fault opening closing

6 Shear-tensile faulting
Source process Force equivalent Moment tensor DC + fault opening fault opening closing

7 Decomposition of MT

8 Decomposition of MT + + ISO DC CLVD non-shear shear non-shear

9 Double-couple component of the moment tensor
Force equivalent Seismic moment tensor DC part double couple (DC) (shear faulting) rotated double-couple (DC)

10 Non-double couple components: ISO and CLVD
Force equivalent Seismic moment tensor ISO part (explosion) CLVD part (tensile crack) compensated linear vector dipole

11 Decomposition of the moment tensor
M – moment tensor MISO – trace of M M* – deviatoric part of M Percentage of ISO, CLVD and DC : |ISO|+|CLVD|+DC = 100%

12 Physical interpretation of MT

13 Parameters of shear faulting
DC components Parameters of shear faulting orientation of active faults, fault mapping type of fracturing (strike-slip, normal/reverse faulting) Determination of present-day tectonic stress orientation of principal stress axes ratio between principal stresses

14 Numerical errors of the MT inversion
insufficient number of stations presence of noise in the data unfavourable station coverage of the focal sphere inaccurate knowledge of the structure model approximate location and Green’s functions approximate moment tensor

15 Presence of single forces
no dipole forces Examples: impact of meteorites, landslides, volcanic eruptions, fluid flow in volcanic channels the process is not described by the moment tensor!

16 Complex shear faulting
DC1 DC2 DC + CLVD ISO = 0 fault Sum of two DCs of different orientations produces DC and CLVD

17 Combined shear-tensile faulting I
DC + CLVD + ISO fault Example: hydrofracturing High pore pressure can cause opening faults during the rupture process (CLVD and ISO are then positive).

18 Combined shear-tensile faulting II
CLVD and ISO are correlated! ISO/CLVD -> vP/vS

19 Correlation between ISO and CLVD
shear-tensile faulting linear dependence different vP/vS ratios CLVD [%]

20 Shear faulting in anisotropic media
DC + CLVD + ISO fault The relation between fracture geometry and acting forces is more complicated in anisotropic media than in isotropic media.

21 Moment tensors in isotropy
Shear earthquakes in isotropy (Aki & Richards 2002, Eq. 3.22): n S un u – slip S – fault area  – shear modulus  – slip direction n – fault normal cijkl – elastic parameters double-couple (DC) mechanism

22 Moment tensors in anisotropy
Shear earthquakes in anisotropy (Aki & Richards 2002, Eq. 3.19): n S un u – slip S – fault area  – shear modulus  – slip direction n – fault normal cijkl – elastic parameters general (non-DC) mechanism

23 Examples

24 1997 West-Bohemian earthquake swarm

25 Example: seismicity in West Bohemia
active tectonics geothermal area mineral springs emanations of CO2 earthquake swarms: 1985/86 1994 1997 2000 2008

26 Swarm 97: Basic characteristics
Duration: weeks Number of earthquakes: Strongest event: M=3.0 Depth of events: km Focal area: x700x1000 m Faults activated: 2 different faults N P wave S wave Z E 1 s

27 Swarm 97: epicentres and mechanisms
Nový Kostel focal area Fischer & Horálek (2000) Horálek et al. (2000)

28 DC & non-DC mechanisms Type A Type B

29 Correlation between ISO and CLVD
corr. coeff = 0.91 + vP/vS = 1.48 strong indication for tensile faulting!

30 Shear & tensile faulting
A events B events Shear faulting Tensile faulting u u Slip is along the fault Slip is not along the fault Moment tensor is DC Moment tensor is non-DC (DC+CLVD+ISO)  – fault , u – slip,  – deviation of the slip from the fault

31 Deviation of the slip from the fault
A events: -5 <  < 5 B events: 10 <  <20

32 Induced microseismicity during the 2000 fluid injection experiment in KTB, Germany

33 KTB superdeep drilling hole
location: northern Bavaria, Germany holes: pilot hole - 4 km, main borehole km (October 1994), distance – 185 m geology: crystalline unit, steeply inclined layers of gneisses, amphibolites borehole geometry: vertical to 7.5 km, then inclined bottom hole temperature: 265ºC N P wave S wave Z E 1 s

34 Injection experiment 2000 experiment: 60 days
amount of fluid: 4000 m3 of fresh water entire 9.1 km borehole was pressurized well head pressure was between 20 to 30 MPa flow rate ranged between 30 to 70 l/min several sharp pressure drops during shut-in phases N P wave S wave Z E 1 s

35 Focal mechanisms of 37 events
Nodal lines P/T axes P T Nodal lines and P/T axes are well clustered

36 Non-DC components ISO percentage CLVD percentage
Mean value of ISO = 1.5% Mean value of CLVD = -5.7% Positive values - tensile components, negative values - compressive components

37 Correlation between ISO and CLVD
corr. coeff. = 0.01 no correlation! strong indication for other origins than tensile faulting!

38 Anisotropy models at KTB
P-wave velocity S-wave velocity P anisotropy: %, S1 anisotropy: %, S2 anisotropy: % anisotropic models of gneiss inferred from: VSP, sonic logs, lab measurements References: Jahns et al. (1996), Rabbel (1994), Rabbel et al. (2004)

39 Inversion for anisotropy: method
Input: moment tensors of 37 events anisotropy at the focal area Output: fault normals and slip directions theoretical DC, CLVD and ISO components The misfit function: misfit between the theoretical and observed non-DC components Result: optimum orientation of anisotropy

40 Inversion for anisotropy: results
Misfit for TI Misfit for ORT The misfit function is normalized so it equals 1 for an isotropic medium.

41 Optimum anisotropy orientation
Triangles: optimum orientation from moment tensors Squares: orientation from MSP Rabbel et al. (2004) Anisotropy axes (plunge/azimuth): Axis 1: 5º/65º, Axis 2: 50º/160º, Axis 3: 40º/330º

42 Summary

43 Significance of the DC components
Parameters of shear faulting orientation of active faults, fault mapping type of fracturing (strike-slip, normal/reverse faulting) Determination of present-day tectonic stress orientation of principal stress axes ratio between principal stresses

44 Significance of the non-DC components
Discrimination explosions versus earthquakes Analysis of tensile faulting detection of overpressure regime temporal variation of pore pressure the vP/vS ratio in a focal area Estimation of anisotropy in a focal area orientation of anisotropy axes anisotropy strength

45

Download ppt "Physical interpretation of DC and non-DC components of moment tensors Václav Vavryčuk Institute of Geophysics, Prague."

Similar presentations

A Two-Step Time-Frequency Moment Tensor Inversion: Application to Mining Data Václav Vavryčuk 1, Daniela Kühn 2 1 Institute of Geophysics, Prague 2 NORSAR,

A Two-Step Time-Frequency Moment Tensor Inversion: Application to Mining Data Václav Vavryčuk 1, Daniela Kühn 2 1 Institute of Geophysics, Prague 2 NORSAR,
Physical models for seismicity triggered during hydrofracture experiments Asaf Inbal Spatiotemporal distribution of induced seismicity in hydrofracture.

Physical models for seismicity triggered during hydrofracture experiments Asaf Inbal Spatiotemporal distribution of induced seismicity in hydrofracture.
(Introduction to) Earthquake Energy Balance

(Introduction to) Earthquake Energy Balance
Slab deformation and seismicity Thorsten W. Becker Lisa A. Alpert Iain W. Bailey Melanie Gerault Meghan S. Miller University of Southern California Los.

Slab deformation and seismicity Thorsten W. Becker Lisa A. Alpert Iain W. Bailey Melanie Gerault Meghan S. Miller University of Southern California Los.
Using Induced Seismicity to Predict and Monitor Reservoir Permeability Pathways STRM LLC.

Using Induced Seismicity to Predict and Monitor Reservoir Permeability Pathways STRM LLC.
Distribution of Microcracks in Rocks Uniform As in igneous rocks where microcrack density is not related to local structures but rather to a pervasive.

Distribution of Microcracks in Rocks Uniform As in igneous rocks where microcrack density is not related to local structures but rather to a pervasive.
Geology of the Lithosphere 2. Evidence for the Structure of the Crust & Upper Mantle What is the lithosphere and what is the structure of the lithosphere?

Geology of the Lithosphere 2. Evidence for the Structure of the Crust & Upper Mantle What is the lithosphere and what is the structure of the lithosphere?
Earthquakes and seismo-tectonics

Earthquakes and seismo-tectonics
Theoretical aspects of seismic waves and sources Massimo Cocco INGV Earthquakes produce effects to the environment & the society Damages are produced by.

Theoretical aspects of seismic waves and sources Massimo Cocco INGV Earthquakes produce effects to the environment & the society Damages are produced by.
Kinematics II: Euler’s poles and triple junctions

Kinematics II: Euler’s poles and triple junctions
Rheology Different materials deform differently under the same state of stress. The material response to a stress is known as rheology. Ideal materials.

Rheology Different materials deform differently under the same state of stress. The material response to a stress is known as rheology. Ideal materials.
Multiscale Seismology: the future of inversion W. MENKE Lamont-Doherty Earth Observatory Columbia University E. CHESNOKOV and R.L. BROWN Institute for.

Multiscale Seismology: the future of inversion W. MENKE Lamont-Doherty Earth Observatory Columbia University E. CHESNOKOV and R.L. BROWN Institute for.
Geol 600 Notable Historical Earthquakes Finite fault rupture propagation rohan.sdsu.edu/~kbolsen/geol600_nhe_source_inversion.ppt.

Geol 600 Notable Historical Earthquakes Finite fault rupture propagation rohan.sdsu.edu/~kbolsen/geol600_nhe_source_inversion.ppt.
Conduit length Conduit top Tilt: 17 µrad due to pressure 50 MPa 100 MPa P Tilt  Pressure Conduit length Conduit top τ Tilt  Traction  Strain rate.

Conduit length Conduit top Tilt: 17 µrad due to pressure 50 MPa 100 MPa P Tilt  Pressure Conduit length Conduit top τ Tilt  Traction  Strain rate.
Geol 600 Notable Historical Earthquakes Source mechanisms and body wave radiation patterns

Geol 600 Notable Historical Earthquakes Source mechanisms and body wave radiation patterns
Recall the momentum equation:  ∂ 2 u i /∂t 2 = ∂ j  ij +f i, where f i is the body force term An earthquake source is usually considered slip on a surface.

Recall the momentum equation:  ∂ 2 u i /∂t 2 = ∂ j  ij +f i, where f i is the body force term An earthquake source is usually considered slip on a surface.
UNIVERSITY OF ATHENS Faculty of Geology and Geoenvironment Department of Geophysics and Geothermics A. Agalos (1), P. Papadimitriou (1), K. Makropoulos.

UNIVERSITY OF ATHENS Faculty of Geology and Geoenvironment Department of Geophysics and Geothermics A. Agalos (1), P. Papadimitriou (1), K. Makropoulos.
Václav Vavryčuk Institute of Geophysics, Prague Origin of earthquake swarms in West Bohemia inferred from observations of non-doble-couple components in.

Václav Vavryčuk Institute of Geophysics, Prague Origin of earthquake swarms in West Bohemia inferred from observations of non-doble-couple components in.
Focal Mechanism Solutions

Focal Mechanism Solutions
U.S. Department of the Interior U.S. Geological Survey Earthquake Sources Based on a lecture by James Mori of the Earthquake Hazards Division, Disaster.

U.S. Department of the Interior U.S. Geological Survey Earthquake Sources Based on a lecture by James Mori of the Earthquake Hazards Division, Disaster.

Similar presentations

Ads by Google