1. Deploying non-HA NSM Components in a Microsoft Cluster Environment -Unicenter NSM Release 11.1 SP1 -Last Revision October 30, 2007

2. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 2 Glossary The following terms and abbreviations are used in this presentation: -“HA” = Highly Available -“NSM” = Unicenter Network Systems Management -“USD” = Unicenter Service Desk -“MSCS” = Microsoft Cluster Server -“Cluster Name” = Network name associated with the cluster group -“AMS” = Unicenter Alert Management System -“UNS” = Unicenter Notification System

3. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 3 Disclaimer -This presentation pertains to Unicenter NSM r11.1 SP1; it does not apply to r11.0 -This document represents field best practice. As such, it is supported on a “best effort” basis - as are any field developed tools. -CA reserves to right to update this document as needed in response to any issue. Therefore, you should check for an updated version before opening any issue related to this best practice.

4. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 4 Objectives -The procedures provided in the presentation are designed for architectures where: -Intermix of non-HA and HA components is required as part of a migration from Unicenter NSM 3.1 to NSM r11.1 SP1 -Certain non-HA components, such as the Alert Management System (AMS), must be installed alongside other components which are.

5. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 5 Scope -This presentation includes a summary of installation procedure for selected non-HA components -It does not include information on how to make these non-HA components Highly Available. That is beyond the scope of this presentation. -However, wherever possible, testing has been carried out with the view to make them HA.

6. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 6 Non-HA Components -Components that have been verified as non-HA include: -Alert Management System (AMS) -Unicenter Notification Service (UNS) -EM Provider -Unicenter Repository Bridge -Unicenter Dynamic Containment Service (DCS) -The following Agent Technology (AT) components: -OS Agent Gateway -AS/400 Agent -Active Directory Services Agent -Management Command Center (MCC)

7. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 7 Non-HA Components -The following non-HA components are also available for install but have not been tested: -Worldview DMI Manager -Continuous Discovery (Agent and Manager) -Continuous Discovery WV classes may not be defined. If so, Continuous Manager will not function correctly -Web reports and Dashboards -Unicenter Browser interface -Use caution if you must install these components as they have not been certified or tested.

8. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 8 Component Selection -Here you can see HA and non-HA components available for selection at NSM SP1 level

9. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 9 For additional information….. -Appendix C “Making Components Cluster Aware and Highly Available” in the Unicenter NMS r11.1 Implementation Guide -“Best Practices for Implementing Unicenter NSM r11.1 in an HA MSCS Environment Part I and Part II” presentations available on the Fault Tolerance page of the Implementation Best Practices site (http://supportconnectw.ca.com/public/impcd/r11 /FaultTolerance/FaultTolerance_Frame.htm)

10. Non-HA Components Cluster Resource Kit

11. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 11 Cluster Resources Kit -Non-HA NSM components cluster resource kit is included in the package -Automatically detects which non-HA components were installed and defines the cluster resources for them -Cluster Resources for Continuous Discovery Agent and Manager are not automatically defined -If required classes are defined for Continuous Discovery, then Continuous Discovery resources will be defined provided “Discovery” is specified as the first argument

12. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 12 How to Install Resource Kit? -Download nsmCluster.zip from SupportConnect -Extract the contents of the zip file into WVEM bin directory For example: -“\Program Files\CA\SharedComponents\CCS\WVEM\Bin” - The zip file includes two files -nsmCluster.cmd -caiNsmCluster.vbs -To define cluster resources for non-HA components, execute nsmCluster -If Continuous Discovery cluster resources are to be defined, then specify the first argument as “Discovery”. For example: -nsmCluster Discovery -Do this only after you have verified Continuous Discovery classes are defined (this also includes Filter entries).

13. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 13 Cluster Resources - Before -Here you see cluster resources defined by the NSM install process. Cluster resources for non-HA components are not defined.

14. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 14 Cluster Resources - After -Here you see cluster resources for non-HA components defined by the cluster resource kit.

15. Installing Non-HA Components with HA Components

16. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 16 Two Nodes Cluster Install 1.Node A is active Node 2.Install NSM on Node A 3.Move Group 4.Install NSM on Node B

17. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 17 Prerequisites -Before you install components on Node A verify the cluster setup: -Move Groups to verify cluster is set up correctly -Identify the SQL Cluster resource group for NSM r11.1 -Verify NSM is not previously installed as non-HA -Move Group to Cluster Node A if Cluster Node A is not active node

18. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 18 Install Summary – Node A -Install NSM HA and non-HA components on Node A -Install NSM Cluster Resource Kit and execute nsmCluster.cmd to define cluster resources for non-HA components -Online and offline these cluster resources. -This will change the required services from Automatic to Manual -Further customization is not recommended until all the components installed on the Node A are also installed on the second node

19. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 19 Install Summary – Node B -If NSM Resources are not offline, offline them using the Cluster Administrator (note that this should have been done by the NSM install process on Node A) -Move Group to Cluster Node B (since resources are offline, they will not start on Node B) -Install NSM components on Node B, being careful to select the same options installed on Node A. -Note that Cluster Resource Group Selection dialog will NOT be displayed when installing on second or subsequent nodes. It is only displayed for the first node -Once the install on Node B is completed, the system is ready for customization

20. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 20 MDB -MDB is created during install on first cluster node. -On the subsequent cluster nodes, install verifies the MDB exists and is at the correct MDB level (1.0.4) -If it is at the correct level, which it should be, the MDB is NOT upgraded or recreated

21. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 21 Install – Release 11.1

22. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 22 Resource Groups This shows cluster resources prior to install

23. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 23 Resource Group Selection Install process automatically detects if it is running in a cluster environment and displays Resource Group Selection menu with eligible Cluster Groups for HA mode

24. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 24 Install

25. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 25 Install - WorldView -Here you see non-HA Bridge and DCS components are selected

26. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 26 Install – Agent Technology Manager -Here you see OS Agent Gateway, which is not HA, selected along with Agent Technology Manager component AT Manager

27. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 27 Install – Agent Technology Agents -Here it shows non-HA agents “AS/400 System Agent” and “Active Directory Agent” selected

28. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 28 Install – Enterprise Management -Here it shows non-HA “Alert Management” and “Enterprise Management Provider” components selected

29. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 29 Install – Other Non HA Components -Here it shows non-HA components “Management Command Center”, “Continuous Discovery” and “Notification Services” selected Configuration Manager is not selectable

30. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 30 Install – Event Server Event Manager set to SQL VNode

31. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 31 Install – Global Catalog Global Catalog created on the shared disk with SQL VNode

32. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 32 Global Catalog Contents of the Global Catalog. Entries with SQL VNode name

33. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 33 Configuration Preferences -Here you see that Component Security cannot be installed

34. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 34 Install Directories

35. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 35 Install – Selection Summary

36. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 36 Install Status

37. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 37 Offline Resources -NSM Resources should be set to offline by the install process. If they are not offline, offline them prior to moving groups -If NSM Resources are not offline, it will attempt to start NSM components with move group and will fail as components are not yet installed on the new active node.

38. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 38 NSM Resources Offline -Here it shows the Cluster resources created by the NSM install process. The install process will not create cluster resources for non-HA components

39. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 39 Cluster Resources -Here you see cluster resources defined for non-HA components through nsmCluster.cmd from NSM cluster resource kit

40. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 40 Install on Cluster Node B -Install NSM Components on cluster node B. Node B will be active after Move Group -Select the same options (e.g., directory names, shared disk, etc.) that you selected for Node A with the exception of non-HA Agent Technology services (e.g., AS400 Agent, OS Agent Gateway, etc.)

41. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 41 Reboot -After the install completes on all cluster nodes, start the customization. -If the install process requires reboot, do the following: -Move Group to Cluster Node A. If reboot was required on Node A, this should have been carried out while Node B was active -Put NSM cluster resources online if they are offline -Reboot Cluster Node B

42. Alert Management System

43. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 43 Alert Management System - AMS -Alert Management system is not HA but, if implemented correctly, will provide HA to some degree. This includes:- -Consolidation of Events -Events Generated from Node A will be consolidated with Alerts generated from other nodes -AMS must be active on the ACTIVE NODE only. It should NOT be active on all cluster nodes

44. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 44 Hold Queue -If the AMS server is not available, AMS caches alerts on the local disk WVEM\AMSHOLD directory -When the AMS Server is back online it generates alerts from the cached entries in the hold queue -In a cluster environment, because these alerts are cached on the local disk, they will not be re- generated after failover. Therefore, you will need to manually generate them. -Under normal circumstances, however, there should not be any cached entries.

45. Management Command Center

46. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 46 MCC -MCC can be installed on the cluster nodes, if required. - It should not be launched from inactive cluster node. If you attempt to launch MCC Client from inactive cluster node, MCC will exit without displaying MCC dialog.

47. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 47 MCC - Alert RHP -If MCC launched from Remote node (non-cluster node), both real nodes of the cluster will be displayed. -Alert Management System service is started on the active node only -Alert details on both nodes displayed should be identical. -DIA runs on all cluster nodes (active and inactive nodes) -If MCC launched from the cluster node, then only active node will be displayed

48. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 48 MCC Client- Remote Node Real Cluster Nodes names

49. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 49 MCC Client -Here it shows MCC launched from active cluster node. Only active node is displayed. The node name is the real cluster node name

50. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 50 MCC Client - Topology -Here you see SQL VNode is displayed in Topology View

51. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 51 MCC and Failover -If the AMS server (in this case, the cluster node) fails over, the remote MCC client will continue and automatically pick up the alerts from the new active node. -In some cases, such as Enterprise Management, it may require re-connection. -For a list of other MCC caveats, review the NSM HA presentation.

52. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 52 Failover -Here you see a manual failover including AMS

53. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 53 Failover -Here you see how the remote MCC client continues to work after failover

54. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 54 Consolidation of Alerts -Here you see how Alerts are consolidated from different cluster nodes after failover First Alert listed is from cluster Node I14YCLUST2 whereas the other events are from cluster node I14YCLUST1. I14YCLUST2 is the new active node after failover

55. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 55 MCC and Alert Management -Here you see how AMS is administered from MCC

56. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 56 AMS Gotchas -The command line utilities, such as caamspurge, will not work when executed from command prompt and will typically generate an abend. -caamspurge utility is not HA and does not recognize cluster setup. Thus, it attempts to purge alerts using real node name and is not successful. -If purging of alerts based on age is a key requirement and Service Availability Management Pack (SAMP) is installed, then simply execute the following command: -cawto SAMPAMS_PROXY -For example: -cawto SAMPAMS_PROXY caamspurge –d 15 -If SAMP is not installed then execute AMS command as follows -OPRCMD [ ] -Under SP1 even if system environment variable CA_AMSSERVER is defined, this will not help to run AMS command unless executed as indicated above

57. Continuous Discovery

58. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 58 Continuous Discovery Classes -For Continuous Discovery to function correctly, required WorldView classes must be defined. -These may be missing if installed with HA NSM. -If classes are missing, Continuous Discovery Manager will start but nothing will be discovered

59. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 59 Continuous Discovery Classes -This shows WV classes that must exist in the HA MDB for Continuous Discovery to function correctly

60. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 60 Continuous Discovery Filter -Continuous Discovery Filter Entries

61. Unicenter Notification Service (UNS)

62. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 62 Unicenter Notification Service -Unicenter Notification Service (UNS) is not HA out- of-box -It is installed on local disk and any customization has to be carried out on all cluster nodes.

63. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 63 UNS -Here you see how email is generated by the notification service from the active cluster node

64. Unicenter Repository Bridge

65. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 65 Unicenter Repository Bridge -Bridge is not HA out-of-box -It is installed on local disk, however, the TBC files can be moved to a shared disk so that the configuration can be shared by all cluster nodes. -It is dependent on SQL Server

66. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 66 Config Files -Change the location of Bridge configuration files to a shared disk to enable it to be shared by all cluster nodes -Create Bridge directory on the shared disk -Update Config File Path to a shared disk -This should be carried out on all cluster nodes -Restart Bridge service to pick the new location

67. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 67 Update the Config File Path -Here you see the Config File Path has been updated to a shared drive You must carry out this change on all Cluster Nodes

68. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 68 Shared Disk – Config Files -Here you see the Bridge Config directory manually created on the shared disk

69. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 69 Bridge Configuration -Here you see the Logging directory changed to a shared disk so that Bridge Configuration can be used on all cluster nodes SQL VNode specified as Event Management Node

70. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 70 Bridge Rile -Here the Bridge is configured to Bridge all Windows 2003 server objects with a propagated severity of 6. The destination repository in this case is I14Y229

71. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 71 Target Name -Here you see the Bridge objects will be created on HABridge Folder

72. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 72 Name Melding -Here it shows the name melding prefix is to set Virtual node

73. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 73 Bridge -Here you see how the objects are bridged to the destination folder

74. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 74 Bridge Log File -Here you see the Bridge log file started from a first node

75. Dynamic Containment Service (DCS)

76. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 76 Dynamic Containment Service -Dynamic Containment Service (DCS) is not HA. -Define Cluster Resource for DCS Service -Re-locate the Configuration file to a shared drive so that the configuration can be shared all cluster nodes -Set the log file to a shared disk so that the configuration can be shared

77. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 77 DCS Config -Here you see how to move the configuration directory to a shared disk. The DCS directory has to be manually created to run on all cluster nodes You must run this on cluster Nodes

78. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 78 Configuration – Repository Details

79. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 79 Logging -Change the location of the log file to a shared drive so the configuration can be shared by all cluster nodes

80. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 80 Event Management -Specify the Virtual Node name for Event Management Node

81. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 81 Rule Definition -Here you see a simple DCS rule

82. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 82 Console Log -Here you see the console log with DCS started on node1 (the active node)

83. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 83 DCS Container -Here you see DCS Container with the objects with the matching criteria

84. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 84 Failover -Here DCS is started on the second node after failover

85. Enterprise Management Provider

86. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 86 EM Provider -EM Provider cannot be selected with HA components out-of-box. -MCC clients uses SQL Virtual Node and thus no requirement to know the active cluster node

87. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 87 MCC -Here you see the Enterprise Management Administrator for the Active Cluster node

88. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 88 MCC -Here is the console log display

89. Non-HA Agent Technology Services

90. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 90 OS Agent Gateway -This must be active on the Active node or installed on one node only. Otherwise, multiple services will be running on different cluster nodes. -Awservices will be active on all cluster nodes. Thus, if installed on multiple nodes, it requires additional considerations

91. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 91 OS Agent Gateway -Here you see OS Agent Gateway in the running state. No further testing has been carried out

92. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 92 AS400 Agent -If selected, it should only be installed on one cluster node. Otherwise, multiple as400 managers will be active on different nodes

93. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 93 AS/400 Agent -Here you see AS400 Agent in running state

94. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 94 AS400 Agent -This shows AS400 managed by cluster node

95. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 95 Active Directory Services Agent -Here you see Active Directory Services Agent in running state

96. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 96 Active Directory Services Agent -Here you see Active Directory Services Agent active on a cluster node

97. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 97 Reports -Here you see execution of Delivery Status Report

98. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 98 MasterKB -Since DIA is active on ALL nodes of the cluster, do NOT define MasterKB on the cluster node. - If MasterKDB is defined on the cluster node, you may experience issues with DIA Grid synchronization -Recommendation is to install MasterKB on non-cluster node. -If you have to install MasterKB on the cluster nodes consider defining the SRV record with Priority #1 for the key cluster node and Priority #2 for the dormant (inactive) cluster node (for a two-node cluster configuration). Note that this option has not fully tested.

99. © 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. 99 Questions?? -Mail to: -ImpCDFeedback@ca.comImpCDFeedback@ca.com