We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byAlexa MacDonald
Modified over 2 years ago
1 Marie Curie Fellowship ECON2 Mini-conference 9-11 July 2008 University of Malta
2 ECON2 Mini-conference M.Sc By Research : Kenneth Spiteri Supervisors: Dr. Pericle Zanchetta Dr. Lee Empringham
3 Presentation Outline Motivation Background Work Done Under ECON2 Conclusion & Results Further Work
4 Motivation To built on a small scale, a prototype setup using a matrix converter for the control of the rotor side of a DFIG for wind energy application.
5 Background Wind power renewable energy; How should it be done?
6 Background Fixed Speed Generators. Adjustable Speed: Direct in line. Adjustable Speed: Doubly Fed Induction Generator.
7 Work Done Under ECON2
8 Achievements A matrix converter for a DFIG system has been successfully been built and tested. The MC was controlled to obtain conversion.
9 Further Work Interface the built converter with a DFIG system. Code the simulated control algorithm into DSP. Connect the DFIG to the grid.
10 Thank you for your Cooperation Any Questions?
Predictive Control in Matrix Converters Marie Curie ECON2 Summer School University of Nottingham, England July 9-11, 2008 Marco Esteban Rivera Abarca Universidad.
1 Marie Curie ECON2 Summer School, July 2008 Politecnico di Bari Control of PMSM drives for traction applications Speaker : Magyari Györgyi-Karola.
WECC Model Validation Working Group Denver, Colorado May 18-19, 2009 Wind Power Plant Dynamic Modeling and Validation Eduard Muljadi
- 1 -Niš, Serbia, November 11 th - 14 th, 2010 Projekt ISSNBS DAAD Deutscher Akademischer Austausch Dienst German Academic Exchange Service NEW HYBRID.
IMPROVING DIRECT TORQUE CONTROL USING MATRIX CONVERTERS Technical University of Catalonia. Electronics Engineering Department. Colom 1, Terrassa 08222,
EPE-PEMC th International Conference EPE-PEMC 2006 Portorož Torque Ripple Reduction by Means of a Duty- ratio Controller in a DTC-PMSM Drive Xavier.
Nottingham July 2008Control of AC-DC, HF DC-DC and Automotive DC-DC Converters Power Electronics Research Laboratories, Dept of Electrical and Electronic.
C. M. Johnson, P. H. Riley and C. R. Saha Thermo-acoustic engine converts thermal energy into sound energy by transferring heat between the working media.
UNIVERSITY OF JYVÄSKYLÄ Resource Discovery in P2P Networks Using Evolutionary Neural Networks Presentation for International Conference on Advances in.
12 SUCCESS FACTORS FOR AN ORGANIZATION Dr. Samuel R. Chand.
Politecnico di Bari, DEE, Power Electronics Research Group Marco Liserre Power Electronics Research Group in Bari Marco Liserre Mercator.
Load Management System with Intermittent Power on the Grid Ruth Kemsley CEng MIMechE MIEE Econnect Ventures Ltd.
Joint Information Systems Committee 4/1/2014 | | Slide 1 Joint Information Systems CommitteeSupporting education and research JISC Conference 2006 OpenMentor.
Job number/BT/ serial number/ page number Generalised Energy Extraction Limits Peter Jamieson April 2008.
Implementation of the Suppressed Demand Guidelines in New and Existing SSC Methodologies Carolyn Luce, Small Scale Working Group Member FIRST SDM JOINT.
Pennsylvania Banner Users Group 2008 Fall Conference Spreadsheet Budgeting.
IEEE INFOCOM 2004 MultiNet: Connecting to Multiple IEEE Networks Using a Single Wireless Card.
The Interplay of Network Coding and Duty Cycling -- Some Early Results By Van Ho & Ioanis Nikolaidis Department of Computing Sciences University of Alberta.
THREE PHASE A.C. COMMUTATOR MOTORS Developed to provide (i)Better Speed Control (ii)Good p.f. Control (iii) Both Speed and p.f. Control 2 Classes Those.
National Aeronautics and Space Administration Wind turbines generate electric power from clean renewable sources. They must be robust and.
What is Computer Software?. Hardware vs Software Got to have both to get the job done!
1 Project: Implementation of a Portal for Telenor R&D Presentation at NTNU, IDI. December 12, 2002.
ELECTRICAL POWER AC MOTOR & DC MOTOR. INTRODUCTION An electrical motor machine that converts electrical energy to mechanical energy in the form of torque.
1 Working With Wind Energy IEEE TISP Training Workshop Pittsburgh, PA, October 2009 Douglas Bowman, PE Central Arkansas Chair, IEEE Lead Engineer,
Energy Without energy nothing happens.. Energy does work! Work is done when objects are moved or heated. Energy is never used up it is simply converted.
HOW A BILL BECOMES A LAW Powers of Congress Unit 2.2.
Can you deal with the Residue of the underlying mood? Local System of Rights Duties & Obligations Local Moral Order Public & Private Actions Underlying.
Controller Tests Stephen Kaye Controller Test Motivation Testing the controller before the next generation helps to shake out any remaining.
Objective The student will be able to: solve equations using addition and subtraction.
RIFLE: a Research Instrument for FLash Evaluation AT Active Technologies.
© 2017 SlidePlayer.com Inc. All rights reserved.