1. AUTOMATION IN MANUFACTURING 1 of 12 MADE IN FLORIDA - INDUSTRY TOURS

2. CIS AUTOMATION All content © 2014 FLATE. This material is based upon work supported by the National Science Foundation (NSF) under Grant No. 1204751. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the NSF. USING THE CHART: WHAT DOES THE CHANGE IN THE MANUFACTURING INDUSTRY SAY ABOUT THE PRODUCTIVITY OF AMERICAN MANUFACTURING? BELL WORK DAY 1: CHANGES IN MANUFACTURING 2 of 12

3. CIS AUTOMATION All content © 2014 FLATE. This material is based upon work supported by the National Science Foundation (NSF) under Grant No. 1204751. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the NSF. ROBOTS TAKING OVER? Watch the video about the robotic chef. http://www.youtube.com/watch?v=nv7VUqPE8AE http://www.youtube.com/watch?v=nv7VUqPE8AE What tasks do you think robots will do in the future? Share ideas with your partner. Share with the class. 3 of 12

4. CIS AUTOMATION All content © 2014 FLATE. This material is based upon work supported by the National Science Foundation (NSF) under Grant No. 1204751. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the NSF. WORDS TO KNOW Sensor - a device that responds to a physical stimulus and transmits a resulting impulse Accommodate - to provide with something needed Prototype - A first full-scale and usually functional form of a new type or design of a construction Jettison - a voluntary sacrifice of cargo or objects to lighten the load Precision - The accuracy of an operation Actuator - A mechanical device for moving or controlling something Productivity - A measure calculated as the ratio of what is produced to what is required to produce it Efficiently - Productive without waste (waste including material and time) 4 of 12

5. CIS AUTOMATION All content © 2014 FLATE. This material is based upon work supported by the National Science Foundation (NSF) under Grant No. 1204751. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the NSF. 5 of 12

6. CIS AUTOMATION All content © 2014 FLATE. This material is based upon work supported by the National Science Foundation (NSF) under Grant No. 1204751. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the NSF. QUESTIONS FROM THE TEXT 1.What shows that Baxter is an easy-to-use manufacturing robot? 2.What Hi-Technology features does Baxter the robot use to be a safe, but useful automated technology? 3.Baxter was being field tested, which features were removed and why? 6 of 12

7. CIS AUTOMATION All content © 2014 FLATE. This material is based upon work supported by the National Science Foundation (NSF) under Grant No. 1204751. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the NSF. BELL WORK DAY 2 Based on your company profile research and the article you read, write one question you plan on asking on the tour to help gain further understanding of the company’s manufacturing process. 7 of 12

8. CIS AUTOMATION All content © 2014 FLATE. This material is based upon work supported by the National Science Foundation (NSF) under Grant No. 1204751. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the NSF. ON YOUR TRIP While you’re on your tour complete the directed note- taking activity. Bring your observations back to class to discuss and review. 8 of 12

9. CIS AUTOMATION All content © 2014 FLATE. This material is based upon work supported by the National Science Foundation (NSF) under Grant No. 1204751. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the NSF. WHAT EVIDENCE OF AUTOMATED TECHNOLOGY DID YOU SEE ON YOUR TOUR? BELL WORK DAY 4: REFLECTION 9 of 12

10. CIS AUTOMATION All content © 2014 FLATE. This material is based upon work supported by the National Science Foundation (NSF) under Grant No. 1204751. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the NSF. DISCUSSION WHAT INTERFACE DID AUTOMATED MACHINES ON YOUR TOUR USE TO COMMUNICATE WITH THE MACHINE OPERATORS? 10 of 12

11. CIS AUTOMATION All content © 2014 FLATE. This material is based upon work supported by the National Science Foundation (NSF) under Grant No. 1204751. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the NSF. DISCUSSION Review your notes from the tour Discuss your observations with your team and class 11 of 12

12. CIS AUTOMATION All content © 2014 FLATE. This material is based upon work supported by the National Science Foundation (NSF) under Grant No. 1204751. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the NSF. REFLECTION AND OBSERVATIONS Write a reflective essay that using evidence from the article text, your tour observations and classroom discussions. How will the use of robots in manufacturing affect the efficiency, productivity, safety and jobs available in manufacturing companies in the United States? 12 of 12