1. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-1 l Chapter 4 l Introduction to Statistical Software Package 4.1 Data Input 4.2 Data Editor 4.3 Data Computation and Transformation

2. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-2 Sample average Population average “X-bar” “mu” Introduction to Statistical Software Package  The statistical software package used – SPSS (Statistical Package for the Social Sciences) v. 21/v. 22  Sophisticated software used by social scientists and related professional for statistical analysis.  Compatible with the Windows environment.

3. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-3 0 2 05101520 Defects per lot Frequency (lots) Average is 5.1 defects per lot 4.1 Data Input  Defining variables (in Variable view): Variable names Labels (Variable and value) Missing values Variable types Column format Measurement level

4. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-4 5+75+7 2 4.1 Data Input  Variable names Must begin with letter. The remaining can be letter, digit, period or the symbols @, #, _ or $. Cannot end with period or underscore Blanks and special characters cannot be used (E.g.: !, ?, ‘ and *) Must be unique; Duplication is not allowed The length in one variable cannot exceed 64 characters Reserved keywords cannot be used as variable names (E.g.: ALL, AND, BY, EQ, GE, LE, LT, NE, NOT, OR, TO and WITH) Are not case sensitive

5. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-5 4.1 Data Input  Labels Variable label is a full description of the variable name Optional It has a value label that can be in alphanumeric and numeric code Alphanumeric code Numeric code

6. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-6 Ranks Rank of median = (1+8)/2 = 4.5 0 1 2 3 4 5 3 1 8 8 5 6 4 9 Median Average Data 4.1 Data Input  Missing values How to dealt with missing data – Leave the cell blank or assign missing value codes Rules for assigning missing value codes: Must be the same data type as they represent (E.g.: Missing numeric data must use numeric missing value code) Missing value code cannot occur as data in the data set By default, the choice of digit is usually 9  Variable types By default, SPSS assumes all new variables are numeric with two decimal places. Can be changed to other type (date, currency, etc) and have different number of decimal

7. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-7 0 5 -20%-10%0% Percent change at opening Frequency Average = -8.2% Median = -8.6% 4.1 Data Input  Column format It is possible to adjust the width of the Data Editor columns and change the alignment of data in the column (left, centre or right)  Measurement level Can be specified as nominal, ordinal, interval or ratio

8. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-8 0 10 20 30 40 50 $0$100,000$200,000 Income Average = $38,710 Median = $27,216 Frequency 4.2 Data Editor  Specifically, in editing and viewing data and result in SPSS, it has seven different types of windows: Data editor (Our focus) Viewer and draft viewer (Output) Pivot table editor Chart editor Text output editor Syntax editor Script editor

9. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-9 Mode 4.2 Data Editor  Data view

10. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-10 Average, median, and mode are identical in the case of a normal distribution 4.2 Data Editor  Variable view

11. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-11 Average Median Mode 4.2 Data Editor  Menu-driven and has variety of pull-down menus.  The main menu bar contains 12 menu: File Edit View Data Transform Analyze* Direct marketing Graphs* Utilities Add-ons Windows Help *Available in all windows (Easier to generate new output)

12. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-12 Average Median Mode 4.2 Data Editor  Toolbar File save File open File print Dialog recall Undo Redo Go to case Go to variable Variable Run descriptive statistics Find Insert cases Insert variable Split file Weight cases Select cases Value labels Use sets Show all variables Spell check

13. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-13 Average Median Mode 4.2 Data Editor  Exercise Enter the following cases:

14. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-14 Average Median Mode 4.3 Data Computation and Transformation  Data screening Objectives: Making sure that data have been entered correctly Making sure that the distributions are normal  The importance of data screening May affect the validity of the results that are produced May assist in deciding; the need of data transformation, the usage of nonparametric techniques  This subtopic will be demonstrated using data of work3.sav

15. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-15 Average Median Mode 4.3 Data Computation and Transformation  Errors in data entry Error in data entry are common and therefore data files must be carefully screened Use Frequencies or Descriptive command Output example:

16. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-16 Average Median Mode 4.3 Data Computation and Transformation  Assessing normality The assumption of normality is prerequisite of many inferential statistical techniques Normality can be explored using a combined assessment of graphic: Histogram Boxplot Normal probability plot Detrended normal plot And normality test: Kolmogorov-Smirnov and Shapiro-Wilk statistics Skewness Kurtosis

17. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-17 Average Median Mode 4.3 Data Computation and Transformation  Assessing normality Performed using the Explore command in Descriptive Statistics under Analyze Histogram Need to be Bell shaped /symmetry

18. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-18 Average Median Mode 4.3 Data Computation and Transformation  Assessing normality Boxplot Median should be at the center of the body (symmetric)

19. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-19 Average Median Mode 4.3 Data Computation and Transformation  Assessing normality Normal probability plot Plot should fall more or less in a straight line

20. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-20 Average Median Mode 4.3 Data Computation and Transformation  Assessing normality Detrended normal plot There should be no pattern to the clustering of points (The point should assemble around a horizontal line through zero)

21. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-21 Average Median Mode 4.3 Data Computation and Transformation  Assessing normality Kolmogorov-Smirnov and Shapiro-Wilk statistics Kolmogorov-Smirnov Sample size 100 Shapiro-Wilk Sample size < 100 If the significance level (Sig.) is greater than 0.05, normality is assumed

22. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-22 Average Median Mode 4.3 Data Computation and Transformation  Assessing normality Skewness and Kurtosis Their value need to be close to zero to be assumed normal  Basically, the data of age can be assumed normal There is no need for transformation Data can be analyzed using parametric test

23. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-23 Average Median Mode 4.3 Data Computation and Transformation  Variable transformation The decision to transform variables depends on the severity of the departure from normality Most appropriate transformation method need to be selected* *Suggested by Tabachnick and Fidell (2007) and Howell (2007) C = A constant added to each score so that the smallest score is 1 K = A constant from which each score is subtracted so that the smallest score is 1; usually equal to the largest score + 1 Data distributionTransformation method [Num. Expression] Moderately positive skewnessSquare-Root [SQRT(X)] Substantially positive skewnessLog 10 [LG10(X)] Substantially positive skewness (with zero values) Log 10 [LG10 (X + C) Moderately negative skewnessSquare-Root [SQRT(K - X)] Substantially negative skewnessLog 10 [LG10(K - X)]

24. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-24 Average Median Mode 4.3 Data Computation and Transformation  Variable transformation The decision to transform variables depends on the severity of the departure from normality Most appropriate transformation method need to be selected* *Suggested by Tabachnick and Fidell (2007) and Howell (2007) C = A constant added to each score so that the smallest score is 1 K = A constant from which each score is subtracted so that the smallest score is 1; usually equal to the largest score + 1  To illustrate the process of transformation, the hours of exercise (hourex) will was examined using the preceding steps.

25. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-25 Average Median Mode 4.3 Data Computation and Transformation  Variable transformation The decision to transform variables depends on the severity of the departure from normality Most appropriate transformation method need to be selected* *Suggested by Tabachnick and Fidell (2007) and Howell (2007) C = A constant added to each score so that the smallest score is 1 K = A constant from which each score is subtracted so that the smallest score is 1; usually equal to the largest score + 1  It is obvious that variable hours of exercise (hourex) is not normal. Variable transformation need to be performed  Based on previous assessment, we know that variable hourex is not normally distributed but is significantly positively skewed and because of the is no zero value involved, Log 10 transformation method should be performed.

26. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-26 Average Median Mode 4.3 Data Computation and Transformation  Variable transformation The decision to transform variables depends on the severity of the departure from normality Most appropriate transformation method need to be selected* *Suggested by Tabachnick and Fidell (2007) and Howell (2007) C = A constant added to each score so that the smallest score is 1 K = A constant from which each score is subtracted so that the smallest score is 1; usually equal to the largest score + 1  Results It is apparent that Log 10 transformation was appropriate because the distribution of hourex is now relatively normal

27. Irwin/McGraw-Hill © Andrew F. Siegel, 1997 and 2000 4-27 Average Median Mode 4.3 Data Computation and Transformation  Variable transformation The decision to transform variables depends on the severity of the departure from normality Most appropriate transformation method need to be selected* *Suggested by Tabachnick and Fidell (2007) and Howell (2007) C = A constant added to each score so that the smallest score is 1 K = A constant from which each score is subtracted so that the smallest score is 1; usually equal to the largest score + 1  Data transformation Recoding Collapsing continuous variables into categorical variables Recoding negatively worded scale items Replacing missing values and bringing outlying cases into the distribution Computing To obtain composite scores for items on a scale  Data selection In the Select Cases option in the Data menu, data can be selected: On specified cases using If option Randomly using the Sample option Based on time or case range using the Range option