1. This project has been assisted by the New South Wales Government through its Energy Efficiency Training Program Prepared by Energy Efficiency through Product & Process Design Prepared by Plastics Industry Manufacturers of Australia (PIMA) in partnership with Australian Management Academy (AMA); executed in collaboration with EcoProducts

2. Copyright and disclaimer The Office of Environment and Heritage and the State of NSW are pleased to allow this material to be used, reproduced and adapted, provided the meaning is unchanged and its source, publisher and authorship are acknowledged. The Office of Environment and Heritage has made all reasonable effort to ensure that the contents of this document are factual and free of error. However, the State of NSW and the Office of Environment and Heritage shall not be liable for any damage which may occur in relation to any person taking action or not on the basis of this document. Office of Environment and Heritage, Department of Premier and Cabinet Phone: (02) 9995 5000 (switchboard) Email: info@environment.nsw.gov.au Website: www.environment.nsw.gov.au 2

3. Energy Efficiency through Product & Process Design Module 1 - Introduction Explaining the Course and Goals © Australian Management Academy and Eco Products Agency 3

4. Energy Efficiency through Product & Process Design The basis of this course is: –80% of potential energy savings are ‘locked in’ at the design stage –Energy can be saved throughout the product lifecycle –Awareness and skills at the design stage can significantly improve energy efficiency throughout the product lifecycle –This can save costs and reduce environmental impacts 4 © Australian Management Academy and Eco Products Agency

5. Energy Efficiency through Product & Process Design The training goals are to: –Increase energy efficiency awareness and skills –Introduce sustainability and Sustainable Manufacturing –Introduce Life Cycle Thinking –Show where energy is used in the life cycle and how it can be saved –Provide tools for evaluating product & process options 5 © Australian Management Academy and Eco Products Agency

6. Energy Efficiency through Product & Process Design An accredited Certificate IV (or higher) level course based on MSA competency unit: MSAENV472A Implement and monitor environmentally sustainable work practices 1.Investigate current practices in relation to resource usage. 2.Set targets for improvements. 3.Implement performance improvement strategies. 4.Monitor performance. 6 © Australian Management Academy and Eco Products Agency

7. Your Participation Attend the 2 day course Complete pre-training & post-training surveys Complete 4 assessment tasks during 2 days Submit one final assessment task within 3 months to demonstrate implementation of an energy efficiency project 7 © Australian Management Academy and Eco Products Agency

8. Course Outline – Day 1 Sustainable Manufacturing Energy Efficient Manufacturing Life Cycle Thinking Energy Management and optimisation 8 © Australian Management Academy and Eco Products Agency

9. Course Outline – Day 2 Workshop –Energy Systems –Financial Assessment of Energy Efficiency Process Design for Energy Efficiency Product Design for Energy Efficiency 9 © Australian Management Academy and Eco Products Agency