1. How to Install a Printer

2. To Begin From the Startmenu, choose settings then go to Printers.

3. Once in Printer Folder Click on Add Printer

4. Printer Wizard Click Next

5. Local or Network Printer Select Local Printer Make sure to uncheck this box Click Next when finished

6. The Printer Port Choose Use the following port The LPT1 works for most local printers Click Next

7. Select Printer Choose the brand of printer - here it is HP Then you need to select the printer - if not listed choose the closest one or select have disk which will help in printer selection Click Next

8. Drivers You want to use the existing driver Click Next

9. Name Your Printer You may name your printer whatever you want Use this printer as the default Click Next

10. Printer Sharing Do not share printer Click Next

11. Test Page Make sure you print a test page to see if your printer works Click Next

12. Finish Adding Your Printer Click Finish

13. Printer Installation Complete Your test page should print by this point, if so, click Ok. If it didnt, click on Troubleshoot.

14. Successful Completion If all steps were followed, then you should have a working computer!!! Congratulations!!!