1. DataLyzer software Training

2. Introduction The purpose of this PPT is to give you quick information on the functionality of DataLyzer and to guide you to more detailed information where this might be helpful. It can be used as a reference during the DataLyzer training This means not all detailed screen options will be discussed in this PPT The manual gives you extensive information for every individual screen option This PPT gives you a summary of the manual with some practical examples or references to whitepapers where helpful In case there is a difference between this PPT and the manual the manual is always leading

3. Setup menu System definitions Language Gage setup Preferences Parameters Notes Categories Data groups Print groups Batch and user defined reports Timer setup Contents

4. System definitions

5. System definitions: Reports

6. System definitions: e-Mail

7. System definitions: Paths

8. Language Following languages are supported English, Spanish, French, Portuguese, German, Dutch, Polish, Hungarian, Czech, Italian, Turkish, Chinese, Russian and on short notice Swedish, Danish, Vietnamese and Arabic

9. Gage Setup

10. Preferences Preferences can be setup company wide or per individual control chart Local preference have a few more options than the overall options: You can set labels for subgroups You can select the charttype run chart If a local preference is set then a change in the overall preferences will not be stored in the local preference You can manage preferences by using a master chart and make local preference equal to the master chart. This option can be found under manage statistical preferences

11. Preferences Control Chart Presentation

12. Preferences Control Chart Calculation

13. Preferences Capability presentation

14. Preferences Capability calculation

15. Preferences Alarms and restrictions

16. Preferences Alerts

17. Sequence preferences

18. Optional parameters

19. Parameters Automated

20. Causes and actions

21. Cause and action groups

22. Categories

23. Data Groups

24. Print groups

25. Batch report

26. User defined report

27. Timer setup

28. File menu Parts and characteristics Sequences Contents file menu

29. Basic data structure Characteristic Part Sequence Data group Optional parameters HUB

30. Part

31. Variable characteristic

32. Attribute characteristic

33. OEE chart

34. Sequence

35. Sequence options

36. Run sequence Enter/edit Utilities Review Logbook Contents data menu

37. Enter/edit

38. Search option

39. Data Utilities Delete Transfer Archive Import

40. Data review

41. Logbook

42. Network HUB Satellites Pages Reports Setup

43. HUB screen

44. Single page status screen

45. Satellite menu

46. Pages

47. Satellite setup

48. Executive Monitor setup

49. Reports Standard reports Summary reports Batch reports User defined reports

50. Standard reports Control chart Multiple control chart Capability analysis Sample submission Pareto Data Notes

51. Summary reports Bat chart Control summary Performance report Bar chart Part and sequence summary Capability history Attribute and OEE history Combined capability Scattergram Control limits report Status reports

52. Bat chart

53. Control summary

54. Performance report

55. Capability history

56. Attribute and OEE history

57. Combined capability

58. Scattergram

59. Calculated and stored control limits

60. Consolidated status of charts

61. Consolidated status of attribute charts

62. Process Overview