Presentation is loading. Please wait.

Presentation is loading. Please wait.

Estimating Demand Functions Chapter 5. 1. Objectives of Demand Estimation to determine the relative influence of demand factors to forecast future demand.

Similar presentations


Presentation on theme: "Estimating Demand Functions Chapter 5. 1. Objectives of Demand Estimation to determine the relative influence of demand factors to forecast future demand."— Presentation transcript:

1 Estimating Demand Functions Chapter 5

2 1. Objectives of Demand Estimation to determine the relative influence of demand factors to forecast future demand to make production plans and effective inventory controls

3 2. Major approaches to Demand Estimation a.Marketing Research Consumer survey - (telephone, questionnaire, interviews, online survey)

4 Advantage: Advantage: provides useful data for the introduction of new products Disadvantages:  It could be biased due to unrepresentative sampling size Consumers may provide socially acceptable response rather than true preferences

5 Consumer Clinic  a sample of consumers is chosen either randomly, or based on socio- economic features of the market  They are given some money to spend on goods  Their purchases are being observed by a researcher

6 Advantages: -more realistic than consumer surveys -avoids the shortcomings of market experiments(costs). Disadvantages: -participants know that they are in an artificial situation -small sample because of high cost

7 Market Experiments (p. 158) -Similar to consumer clinic, but are conducted in an actual market place -Select several markets with similar socio-economic characteristics and change a different factor in each market -Use census data for various markets and study the impacts of differences in demographic characteristics on buying habits

8 Advantages: -can be done on a large scale -consumers are not aware that they are part of an experiment Problems of Marketing Research -the sample may not be representative -the responses may be biased -the consumers may not be able to answer the questions accurately

9 2b. Statistical Method -Involves the use of regression analysis to determine the relative quantitative effect of each of the demand determinants. Regression Analysis is usually: - more objective than marketing research - provides more complete information than market research - generally less expensive

10 3. Steps in regression analysis -Specify the model (theory) -Obtain data (type and source) -Specifying the form of the demand equation (linear, log linear) -Estimate the regression coefficients (Finding the line of best fit by minimizing the error sum of squares) ∑(Y t – ) 2 = ∑(Y t - a - bX t ) 2 =0

11 Regression Parameters

12 Steps in Regression Test the significance of the regression results (Overall tests and individual tests). Use the results of the regression analysis as a supporting evidence in making business policy decisions (change price, ad strategy, customer service)

13 4 a.Given Sales (Y t in ‘000 units) and Advertising Expenditures (X t ) (in mill. $) data as follow:

14 Y t X t 37 5 -7 -1 7 1 48 7 4 1 4 1 45 6 1 0 0 0 36 3 -8 -3 24 9 25 4 -19 -2 38 4 55 9 11 3 33 9 63 8 19 2 38 4 0 0 144 28

15 a. b.

16 4 c. Interpretation of Regression Coefficients -- is the intercept term which represents the value of the dependent variable when X t =0. -- has no economic meaning when its value lies outside the range of observed data for Y t.

17 -- the slope of the regression line -- represents the change in the dependent variable (Y t ) related to a unit change in the independent variable. = 5.14 means that a $ 1 million dollar increase in ad expenses will result in an increase in sales by 5140 units.

18 4 d. Overall Measures of Model Performance (i) R 2 =coefficient of determination is the ratio of the variation in sales explained by the variation in ad expenses. =Explained Variation/Total Variation

19 Notice that R 2 is adjusted for the degrees of freedom- the number of observations beyond the minimum needed to calculate a given regression statistic. For example, to calculate the intercept term, at least one observation is needed; to calculate an intercept term plus one slope coefficient, at least two observations are required, and so on.

20 39 25 49 49 25 16 44 0 1 28 256 64 34 100 361 59 225 121 54 100 361

21 => Explained variation => Total variation =.761 means that 76.1% of the variation of in sales is explained by the variation in advertising expenditures.

22 Note: One would like R 2 to be as high as possible. R 2, however, depends on the type of data used in the estimation. It is relatively higher for time series and smaller for cross- sectional data. For a cross-section data, R 2 of.5 is acceptable.

23 (ii) F-Statistic- a statistical test of significance of the regression model. F-test of Hypotheses Decision Rule: Accept if F-calculated<F-table Reject if F-calculated >F-table

24 F-table is defined for df 1 =k-1, df 2 =n-k) at  =.05 (conventional) or  =.01, or any other level of significance. [k= # of parameters (2), n= # of observations (7)] F(1, 5) at  =.05 = 6.61, see p. A-58 Table 5 F-cal= R 2 /k-1/[(1-R 2 )/(n-k)]=.751/.249/5=15.1 Reject Ho since F-cal>F-table, i.e. the regression model exhibits a statistically significant relationship.

25 4 e. The t-statistic test is a test of the individual independent variable. t-test of Hypotheses

26 Decision Rule Accept Ho if t-lower< t-cal < t-upper critical value. Reject Ho if t-cal < t-lower or t-cal> t-upper critical value. t-table( d.f.=n-k= 5,  =.05 or at.01) t-table (5,  =.05)=2.571, p. A-56- Table 4 t-cal= =5.14/1.45=3.54>2.51.

27 Accept H 0 Reject H 0 -2.7512.751 0 Decision: Reject Ho since t-cal> t-upper value from the table or t-cal<t-lower value. There is a statistically significant relationship between sales and advertising t

28 Multiple Regression has more than one independent variable. -Use a variety of statistical software (Minitab, Excel, SAS, SPSS, ET,,Limdep, Shazam, TSP) Example: Earnings=f(Age, ED, JOB Exp.) How do we estimate the regression coefficients in this case?

29 = -7.06 -.21Age +2.25ED +1.02JEXP (-2.1) (-1.93) (8.86) (4.07) (The numbers in parenthesis are t-values). R 2 =.874 F-cal =37.05 Test the significance of each of the variables. Interpret the meaning of the coefficients.

30 5.The regression coefficients which are obtained from a linear demand equation represent slopes (the effect of a one unit change in the independent variable on the dependent variable

31 6.6. (-5.21) (4.51) R 2 =.968; =.964; F=258.942 *Linear form

32 7. (-3.304) (4.042) R 2 =.95; F-cal=183.582 - The statistical significance is similar -The coefficients in # 7 represent elasticities, not slopes as in #6. - Example: -.389 means that a 1% increase in X1t results in a.389% decline in

33 Problems in regression Analysis

34 6 a. Problems in Regression Analysis arise due to the violation(s) of one or more of the classical assumptions of the linear regression model.

35 Assumptions - The model is linear in parameters and in the error term. - The error term has a zero population mean  =0 and  2 =1=  -- All regressors are uncorrelated==> Violation of this assumption results in Multicollinearity

36 E(e t e t-1 ) = 0 ==> no autocorrelation (time series) - The error term for one period is systematically uncorrelated with the error term for another period => autocorrelation problem The variance of the error term e t is the same for each observation E(  e t 2 =  2 = 1 heteroscadasticity

37 a. Multicollinearity - A situation where two or more explanatory variables in the regression are highly correlated which leads to large standard errors hence the insignificance of the slope coefficient. To reduce multicollinearity increase sample size. express one variable in terms of the other. transform the functional relationship. Drop one of the highly collinear variables.

38 b. Hetetroscedasticity - Arises when the variance of the error terms is non-constant. - usually occurs in cross-sectional data (large std errors) - leads to biased standard errors - problem may be overcome by using log of the explanatory variables that lead to heteroscedastic disturbances or running a weighted least squares regression

39 c. Autocorrelation - occurs whenever consecutive errors or residuals are correlated(positive vs negative correlation - The standard errors are biased downward making tcal-value larger -We tend to reject the Ho more - occurs in time series data


Download ppt "Estimating Demand Functions Chapter 5. 1. Objectives of Demand Estimation to determine the relative influence of demand factors to forecast future demand."

Similar presentations


Ads by Google