1. Safety First!

2. 1.Wear Goggles 2.Know your tools 3.Make sure all your wires are waterproofed 4.Document all circuits as you wire the control box 5.Prepare for the safety check!

3. How cool are these!

5. Prepare Heat shrink Twist wires Solder Hot Glue Heat Shrink Smile, you’re waterproof!

6.  Tip: Draw as you go!  Every team must create a System Integration Diagram (SID)  Use colors and labels so you know where wires start and end Control Box

8. Before your ROV can enter the water, it MUST pass a safety check.

9. Let’s take a look at MATE’s safety checklist http://www.marinetech.org/scout_2015/ and http://www.marinetech.org/ranger_2015/