1.  VIDEO CAPTURE USING FIREWIRE  VIDEO CAPTURE USING A VIDEO CARD  CAPTURING VIDEO CONNECTING EQUIPMENT AND CAPTURING DIGITAL VIDEO

2. VIDEO CAPTURE USING FIREWIRE Need a computer with either built-in FireWire or a FireWire PCI card and a digital video camera. Will also need Four-to-six-pin FireWire cable Four –pin = Connector attaches to the digital video camera Six – pin = Used to attach devices like FireWire hard drives to the computer. Attaching a Digital Video Camera Get video into a computer is to attach a digital video camera directly to the FireWire port. ( Refer text book page 58)

3. VIDEO CAPTURE USING FIREWIRE Tips to attach a digital video camera to the FireWire port of computer:- Identify the FireWire port on the back of computer. Identify the FireWire port on digital video camera. Connect the four-to-six-pin FireWire cable from the digital video camera ( Four-pin) to the FireWire port of the computer (six-pin) Turn your devices on Launch your video editing software program and any third-party device control software. Make sure the computer recognizes the video camera and the tape’s timecode before continuing.

4. VIDEO CAPTURE USING FIREWIRE Attaching a Video Deck Connect the FireWire cable from digital video deck ( four-pin ) to the FireWire port on computer ( six-pin ) Attaching a Video Monitor The video monitor has more accurate color representation that the computer monitor. Select on computer screen when edit are not going to be the same as the color you see on the television. Usually have an overscan and underscan feature, which allows to view the action and title safe areas. Adjustments for precision color correction. Switchable aspect rations, allowing the user to select either standard 4:3 or 16:9 widescreen mode

5. VIDEO CAPTURE USING A VIDEO CARD Video capture cards like Matrox RTMac was capture card was to convert an analog video signal into a digital one. Couldn’t capture full- screen (640 x 480 pixels) or full-motion (30 fps) video. Capture card have support for a second computer monitor, in addition to a video monitor. Low-end cards support composite video, prosumer card support S-video and high-end card support component video and SDI. Pinnacle’s CineWave card even support HDTV. (Refer text book: Page 162)

6. VIDEO CAPTURE USING A VIDEO CARD Using the Breakout Box Breakout box is a separate unit that uses a cable to plug into the video card. Can connect video camera, decks, and monitors directly to the inputs and outputs provided on the box. The use the breakout box do the following * The computer power turned off, attach the cable from the breakout box to the video card in the back of computer. * Using a video source like a video camera or deck, connect the source’s analog video out to the breakout box analog video in. * Connect the breakout box analog video out to a video recording device analog video in. * Connect your recording device analog video out to a video monitor analog video in

7. VIDEO CAPTURE USING A VIDEO CARD Attaching a Second Computer Monitor The main computer should be plugged into the computer built in monitor support. A second monitor plug into the video card’s monitor support. ( Refer text book : Page 163 )

8. CAPTURING VIDEO Project Setting Launch Adobe Premiere to begin a new project. Choices for audio are either 12 bit / 16 bits and 32 KHz / 48 KHz Selecting A Scratch Disk Should design hard drive to become a scratch disk. Created scratch disk because hard drive speed and size are both significant factor in digital video. Faster drive will minimize the risk of dropping frames when capture digital video. Can capture your video file directly to whichever hard disk.

9. CAPTURING VIDEO Using Device Contol Is software that allows the video source, such as camera or deck to communicate with your computer. Computer can fast forward, rewind, play, pause, stop and record your frame accurately with click of the mouse. Video Capture After you have selected your project setting, designed your scratch disk, and selected your device control, you finally ready to being capturing video. Video Capture Setting Audio Capture Setting Adjusting color Setting In and Out Points Adjust Audio Levels.