1. GEIA-STD-0007 Rev B
OmegaPS 0007

2. Supportability Standards - Graham Brum
Outline
OmegaPS R18.1 Release
Summary of Changes from MIL-STD B
SAE and Rev C
8/27/2012
Supportability Standards - Graham Brum

3. Supportability Standards - Graham Brum
OmegaPS R18.1 Release
R18.1 is the first OmegaPS release to include a GEIA-STD-0007 application
The list of applications now includes
DEF-STAN – Issue 0 to Issue 4
MIL-STD B
DEF AUST 5692 – Issue 1 and Issue 2
GEIA-0007 – Rev B
Access to each Application is controlled by a key code and then by Team/Application access control
Login is through a separate URL.
GUI is as per other core Applications.
8/27/2012
Supportability Standards - Graham Brum

4. GEIA-STD-0007 Differences
The large majority of the 0007 application is drawn directly from the MIL-STD-1388 application
However – key differences make it impossible to move between the two applications seamlessly – data sets can be moved from 1388 to 0007 but not the reverse
8/27/2012

5. GEIA-STD-0007 Differences
ALC – ALCs are Alphanumeric
This improves flexibility and allows for an auditable record of changes required through extended in-service management
8/27/2012

6. GEIA-STD-0007 Differences
Enables capture of Digital Files
Enables data storage for IETMs or direct publications – Illustrated Parts CFTO is using this capability in DND configuration
All data types supported thus could store video as required
Completely enables Initial Provisioning process in DND by storing SPTD for IP Conferences
Add Document adds an item to the Library, Drop Document removes it, Show Document opens the file
Links appear here when a file has been associated with a Project.
LCN and Provisioning Links are enabled currently for DND configuration of OmegaPS.
8/27/2012

7. GEIA-STD-0007 Differences
Procedure
Task
Sub-Task
GEIA-STD-0007
Task
Sub-Task
MIL-STD-1388
Enables three tiered maintenance definition – procedure/task/subtask
Enables good map to SAP and excellent flexibility for creating maintenance documentation

8. GEIA-STD-0007 Differences
Enables all task resources at the Subtask level
This capability was introduced to Omega as an optional setting for the 1388 application several years ago and is consistent with DEF STAN 0060
It allows for work scheduling and better mapping to S1000D
Resources – Personnel, Support Equipment, Provisioned Items, Manuals
8/27/2012

9. GEIA-STD-0007 Differences
All Narratines have been increased to unlimited length
The restrictions imposed by 1388 have all been removed
Narratives now exist for:
Skills
Test Equipment
Support Equipment Recommendation Data Revision Remarks
Facilities
Provisioning Remark
Parts Manual Provisioning Nomenclature
Personnel Requirement
System Re-Design
Logistics Considerations
RAM Characteristics
Failure Mode Mission Phase Characteristics
FMEA Narrative
System/End Item Narrative
Additional Requirements
Unit Under Test Explanation
Electrical Ground
Transported End Item
Transportation
8/27/2012

10. GEIA-STD-0007 Differences
Additional Reliability requirements
Required Mean Time Between Effective (or Essential) Functional Failure
Loss of mission essential function
Required Mean Time Between Non-Effective (or Non-Essential) Functional Failure
Loss of non-mission essential function
Required Mean Time Between System Aborts
8/27/2012

11. GEIA-STD-0007 Differences
Additional Sub-Task Work Area Code
Work Area Code Access
Access Code identifying points of access for maintenance – equates to S1000D Access
Work Area Code Zone
Code identifying where the work will occur – equates to S1000D Zone
8/27/2012

12. GEIA-STD-0007 Differences
Sub-Task Objective States
List of conditions required to complete a subtask
List is drawn from S1000D
8/27/2012

13. GEIA-STD-0007 Differences
Circuit Breaker Identification and State
Groups and States required to complete a sub-task
List is drawn from S1000D
8/27/2012

14. GEIA-STD-0007 Differences
Scheduled Maintenance Events
Defines dependencies for maintenance tasks
In compliance with S1000D
Trigger may be a condition or another task
8/27/2012

15. GEIA-STD-0007 Differences
Scheduled Maintenance Sampling
Defines when a task is to be completed on only a portion of the fielded items
In compliance with S1000D
8/27/2012

16. GEIA-STD-0007 Differences
Additional NSNs
Allows for the identification of additional applicable NSN
This requirement was a result of experience gained from CGCS and DRMIS
When the original HA Reference is a specification rather than a MPN then actual MPNs can be added here associated with the applicable NSN
8/27/2012

17. SAE and Rev C
The Society of Automotive Engineers absorbed TechAmerica in the June of 2013
Therefore the LCLS committee responsible for GEIA-STD-0007 is now an SAE committee with the Aerospace and Defence Group
SAE committees rules do not require SAE membership in order to be a voting member
SAE wants a well balanced voting group
8/27/2012

18. SAE and Rev C Rev C is being planned for 2015
Items Pennant has submitted for consideration for Rev C are as follows
Remove the LCN – no inherent value added – only impediment would be any legacy requirement within the DoD data/solution map
Replace the Task Code with a non intelligent identifier and explicitly store all hidden attributes – adjust any DoD required reports.  This will also give us an opportunity to identify any changes required to these Task identification attributes
8/27/2012

19. SAE and Rev C Rev C is being planned for 2015
Items Pennant has submitted for consideration for Rev C are as follows
Add all data that only exists in LSA Report to be held in the database – any sums, calculations, etc.  This will have the impact of moving us away from the reports and allow us to provide data.
Identify any S2000M data elements that should be added to Material identification
8/27/2012

20. SAE and Rev C Rev C is being planned for 2015
Items Pennant has submitted for consideration for Rev C are as follows
Identify any S3000L data elements that should be added – probably As Design/As Delivered with Configuration Management and Serialization comes in with this – to me the cut off is As Designed then As Delivered allowing us to ID serial numbers delivered by Part #/Assembly
Identify any S5000F data elements that should be added
8/27/2012

21. SAE and Rev C Rev C is being planned for 2015
Items Pennant has submitted for consideration for Rev C are as follows
Identify standard interface requirements to receive data from Engineering systems and provide data to Maintenance Management Systems/Material Management Systems
8/27/2012

22. Questions?
8/27/2012