1. LSA standards, technology and experience in Russia
Dmitry Borozdin Head of LSA software development department
R&D CALS Center "Applied logistics"

2. ILS and LSA standards development
Russian Federal Agency on Technical Regulation and Metrology
Technical Committee 51
Engineering documentation
Technical Committee 323
Aircrafts
Technical Committee 459
Product Life Cycle Information Support
Member
Both Federal authorities and the industry in our country give adequate attention to PLM and ILS technologies.
Back in the Ministry of Economics and the National Standardization Organizations set up our R&D Center entrusted with the task to organize and to coordinate the efforts related to CALS.
The scope of Center activities demanded to draw up conceptual documents, which define the aims and purposes of introduction of the new technologies into the industry,
to prepare a suite of national standards, educational and training materials, to develop methodic and software tools and to approbate them in various branches of industry.
The key idea is to apply international standards for product data representation and exchange as well as in the area of ILS.
observer
Steering Committee
April 2011
LSA standards, technology and experience in Russia

3. Design and technological standards development
Technical Committee 51
Engineering documentation
Unified system
of design
documentation
Unified system of technological documentation
First of all we revised and obtained the major portion of standards in the field of design documentation.
What does it means? The whole system of standards used for many years up to recent dates - was based on application of paper documents.
This cause certain difficulties for introduction and implementation of technologies of electronic doc flow and Product Data Management.
Within 5 years we revised the major volume of standards and added a range of new, defining such terms and definitions as electronic design documents, electronic design models and drawings, electronic product structure and so on.
We also defined and finalized the composition of required set of design documents, established the procedures of their coordination and approval.
April 2011
LSA standards, technology and experience in Russia

4. Aviation documentation standards development
S1000DR-2007
ASD S1000D 2.3 authentic translation
Technical Committee 323
Aircraft
“Harmonized” Russian
Aviation Standard 18675
Aircraft maintenance and repair documentation
We changed the standards regarding the maintenance doc, included the requirements and the rules of presentation of information in the IETM form
We also developed Russian analogue of S5000F standard concerning in-service data feedback
Predecessor of S5000F?
Aircraft electronic dossier
April 2011
LSA standards, technology and experience in Russia

5. ILS and LSA standards development
ISO translation*
Standard for the Exchange of Product model data
Technical Committee 459
Product Life Cycle Information Support
ISO translation*
Parts library
Russian ILS standard
And at the same time we introduced in Russia the series of ISO standards 10303, known as STEP.
As you see the general vector of this work conjunct with the harmonization with international efforts in this area.
Within this period we perfectly well acquainted ourselves with the standards in the field of Integrated Logistic Support.
Russian ILS standard
for civil aviation
Russian LSA standard
* - published as GOST R
April 2011
LSA standards, technology and experience in Russia

6. LSA aviation standards and technologies
Russian LSA aviation industry standard
In cooperation with Russian united aircraft corporation and flight research institute we developed Russian LSA aviation industry standard. It contains description of process and technology of LSA performed in an integrated information system. We think now we have a good opportunity to improve it taking all the best from S3000L 
“Harmonized” Russian
aviation LSA standard?
April 2011
LSA standards, technology and experience in Russia

7. LSA aviation standard data model
Base data models
LSAR data model
ISO (STEP)
DEF STAN
ASD S2000M
But, because one can’t be a pure theoretician, we plunge ourselves into development of a number of software application and their implementation in the industry.
This included: PDM package, based on STEP informational models, as well as on new concepts of NPDM and PLCS projects.
This also included LSA package and the package for development of maintenance documentation.
Working with our solution in the area of LSA we took the courage to deviate from traditional approach to LSA data base - as relational system and created the object data base.
ASD S1000D Spec 2.3
April 2011
LSA standards, technology and experience in Russia

8. Approach to ILS process
Application scenario
analysis
Element-candidates
selection, logistic
structure development
Functional structure
development,
FMEA/FMECA
Maintenance technology and
scheduled checks definition
Maintenance planning
(using ATA MSG-3), RCM
Provisioning planning
Direct maintenance
cost calculation
LSA
This slide describes our point of view to ILS process
We tried to pass the whole cycle starting with PDM, through LSA to Electronic documentation development and in-service data feedback.
As you see we deal and solve traditional set of related tasks…
Collection of actual data
IETM and catalogues development
Performance monitoring
Technical documentation
April 2011
LSA standards, technology and experience in Russia

9. ILS software LSA Performance monitoring Technical documentation
Element-candidates
selection, logistic
structure development
Functional structure
development,
FMEA/FMECA
Application scenario
analysis
Maintenance technology and
scheduled checks definition
Maintenance planning
(using ATA MSG-3), RCM
Provisioning planning
Direct maintenance
cost calculation
LSA
..and we developed software solutions for this tasks.
Actual data collection
IETM development
Performance monitoring
Technical documentation
April 2011
LSA standards, technology and experience in Russia

10. LSA software interfaces
Logistic product
structure (XML)
Performance monitoring database
PDM Step Suite
LSA database
PDM database
Use S5000F?
Reliability data
(XML or DEXX)
CSDB
This slide is about how our software solutions are integrated.
Now we use our own version of in-service feedback protocol,
in the future we have to teach our software also to understand S5000F
Design
data
(ISO 10303
API)
DMRL, procedural
and IPC/IPL
data modules content
(S1000D XML)
April 2011
LSA standards, technology and experience in Russia

11. Experience in LSA projects
Yak-130
Yak-130
Yak-130
Yak-130
SU-30 MKI
SU-30 MKI
SU-30 MKI
SU-30 MKI
Our results in the scope of LSA caused the natural interest in science intensive fields of industry and first of all in aircraft building industry.
We were first involved in LSA projects 5 years ago with Sukhoi superjet project.
Since that time practical joint and cooperative work allowed us to establish good working relations with almost all leading manufacturers of civil and military aircraft equipment in Russia, as with helicopter manufacturing companies.
This year we started the a space ship LSA project with Energia aerospace Design Bureau.
Tu-204 SM
Tu-204 SM
Tu-204 SM
Mi-17
April 2011
LSA standards, technology and experience in Russia

12. ILS and LSA standards development
observer
Steering Committee
Applied logistics useful skills:
So, now we are pleased to be invited to S3000L steering committee meeting as an observer and hope our skills would be helpful
Standards (translated and «self-made»)
Data models /DEXX/ XML
LSA, IETM and performance monitoring software
Experience in LSA projects
April 2011
LSA standards, technology and experience in Russia

13. Thank you! Dmitry Borozdin Head of LSA software development department
R&D CALS Center "Applied logistics“,
Russia, Moscow
April 2011
LSA standards, technology and experience in Russia