Presentation is loading. Please wait.

Presentation is loading. Please wait.

Disassemble NXT 1. Daughterboards Display daughterboard Connector to the motherboard that you can disconnect Bluetooth daughterboard Speaker on the display.

Similar presentations


Presentation on theme: "Disassemble NXT 1. Daughterboards Display daughterboard Connector to the motherboard that you can disconnect Bluetooth daughterboard Speaker on the display."— Presentation transcript:

1 Disassemble NXT 1

2 Daughterboards Display daughterboard Connector to the motherboard that you can disconnect Bluetooth daughterboard Speaker on the display daughterboard is permanently connected with the motherboard by two wires

3 Top of the motherboard 3 http://www.jstuber.net/

4 Bottom of the motherboard 4 http://www.jstuber.net/

5 Hardware block diagram 5

6 Atmel ARM processor – AT91SAM7S256 – 32-bit – 256KB FLASH, 64KB RAM – 48 MHz 6

7 Atmel AVR processor – ATmega48 – 8-bit – 4KB FLASH, 512B RAM – 8 MHz 7

8 Four input ports – Sound sensor – Image sensor – ……. 8

9 Three output ports – Motors – ……. 9

10 Display – 100 x 64 pixel LCD 10

11 Bluetooth – CSR BlueCore 4 – 1 MB FLASH, 47 KB RAM – 26 MHz 11

12 Side of the Bluetooth daughterboard 12 http://www.jstuber.net/ 1MB FLASH memory from ST CSR BlueCore 4


Download ppt "Disassemble NXT 1. Daughterboards Display daughterboard Connector to the motherboard that you can disconnect Bluetooth daughterboard Speaker on the display."

Similar presentations


Ads by Google