1. Unit 2 Lesson 2 Scientific Tools and Measurement

2. For Good Measure What is measurement?
Unit 2 Lesson 2 Scientific Tools and Measurement
For Good Measure
What is measurement?
The ability to describe an observation is important.
A description is a statement that reports what has been observed.
A measurement is a description that includes a number and a unit.
Copyright © Houghton Mifflin Harcourt Publishing Company

3. Why do we use standard units of measurement?
Unit 2 Lesson 2 Scientific Tools and Measurement
Why do we use standard units of measurement?
Measurements were once based on body parts, such as arms and feet.
This was not accurate because body parts vary in size from person to person.
Using standard units makes it possible for a person in one place to work with the same quantity as someone kilometers away.
Copyright © Houghton Mifflin Harcourt Publishing Company

4. Why do we use standard units of measurement?
Unit 2 Lesson 2 Scientific Tools and Measurement
Why do we use standard units of measurement?
Standard units allow scientists to repeat one another’s experiments.
Experiments must be repeatable to determine if the results are valid.
Copyright © Houghton Mifflin Harcourt Publishing Company

5. What is the International System of Units?
Unit 2 Lesson 2 Scientific Tools and Measurement
What is the International System of Units?
The modern metric system is called the International System of Units (SI).
The SI units are the language for all scientific measurements.
There are seven base units used to express the different quantities: length, mass, time, temperature, amount of substance, electric current, and light intensity.
Copyright © Houghton Mifflin Harcourt Publishing Company

6. What are the advantages of using the SI?
Unit 2 Lesson 2 Scientific Tools and Measurement
What are the advantages of using the SI?
SI measurements provide a common international language for scientists to use to share and compare observations and results.
Changing from one unit to another is easier in SI than other systems because most SI units are based on the number 10.
Conversions in non-SI systems, such as converting from feet to miles, are more complicated.
Copyright © Houghton Mifflin Harcourt Publishing Company

7. Made to Measure What are the SI units?
Unit 2 Lesson 2 Scientific Tools and Measurement
Made to Measure
What are the SI units?
Length, mass, time, and temperature are the most commonly used quantities.
Meter is the unit of length. Length is measured with a meterstick, ruler, or measuring tape.
Kilogram is the unit for mass. Mass is measured with a balance.
Copyright © Houghton Mifflin Harcourt Publishing Company

8. Unit 2 Lesson 2 Scientific Tools and Measurement
What are the SI units?
Second is the unit for time. Time is measured using a stopwatch.
Kelvin is the unit for temperature. Temperature is measured using a thermometer.
Copyright © Houghton Mifflin Harcourt Publishing Company

9. Unit 2 Lesson 2 Scientific Tools and Measurement
What are the SI units?
Some units are derived units. A derived unit is calculated from a base unit.
Volume is the amount of space something occupies. The SI unit for volume is the cubic meter (m3). Volume is measured using graduated cylinders and beakers.
Liquid volume is expressed in liters (L), which is not an SI unit. One milliliter (ml) is equal to one cubic centimeter (cm3).
Copyright © Houghton Mifflin Harcourt Publishing Company

10. Unit 2 Lesson 2 Scientific Tools and Measurement
What are the SI units?
Weight is the measurement of the gravitational force on an object. The SI unit for weight is the newton (N).
Weight is measured using a spring scale and depends on the object’s mass.
Measurements such as density must be calculated. Density is calculated by dividing an object’s mass by its volume.
Copyright © Houghton Mifflin Harcourt Publishing Company

11. How can we make very large or small measurements easy to work with?
Unit 2 Lesson 2 Scientific Tools and Measurement
How can we make very large or small measurements easy to work with?
A prefix is one or more letters or syllables added to the beginning of a word to change its meaning.
SI uses prefixes to express an SI unit that is larger or smaller than the base unit.
Kilo- means 1,000 times, so a kilogram is 1,000 grams.
Milli- indicates 1/1,000 times, so a millimeter is 1/1,000 of a meter.
Copyright © Houghton Mifflin Harcourt Publishing Company

12. How can we make very large or small measurements easy to work with?
Unit 2 Lesson 2 Scientific Tools and Measurement
How can we make very large or small measurements easy to work with?
Scientific notation is a short way of representing very large numbers or very small numbers.
Numbers in scientific notation are written in the form a × 10b.
The value of a is usually a number between 1 and 10.
Locate the decimal point and move it to the left or right until it is immediately before or after the numeral that becomes a.
Copyright © Houghton Mifflin Harcourt Publishing Company

13. How can we make very large or small measurements easy to work with?
Unit 2 Lesson 2 Scientific Tools and Measurement
How can we make very large or small measurements easy to work with?
The exponent b tells how many places the decimal point is moved.
If the decimal moves to the left, b is positive. If the decimal moves to the right, b is negative.
The speed of light is 300,000,000 m/s. In scientific notation, this converts to 3 × 108 m/s.
Copyright © Houghton Mifflin Harcourt Publishing Company

14. Why are accuracy and precision important?
Unit 2 Lesson 2 Scientific Tools and Measurement
Why are accuracy and precision important?
Accuracy is a description of how close a measurement is to the true value of the quantity being measured.
The smaller the difference between the measurement and the true value, the more accurate the measurement is.
Copyright © Houghton Mifflin Harcourt Publishing Company

15. Why are accuracy and precision important?
Unit 2 Lesson 2 Scientific Tools and Measurement
Why are accuracy and precision important?
Precision is the exactness of a measurement.
A precise measurement is repeatable and reliable.
If a high precision measurement is repeated, the number obtained will be the same or very nearly the same.
Copyright © Houghton Mifflin Harcourt Publishing Company

16. Why are accuracy and precision important?
Unit 2 Lesson 2 Scientific Tools and Measurement
Why are accuracy and precision important?
How do these diagrams represent accuracy and precision?
Copyright © Houghton Mifflin Harcourt Publishing Company

17. Why do scientists sometimes estimate measurements?
Unit 2 Lesson 2 Scientific Tools and Measurement
Why do scientists sometimes estimate measurements?
People make estimations when doing everyday tasks such as rearranging furniture.
Scientists may estimate to see if the data they collected is reasonable.
Scientists may also estimate to determine which tool is best suited for making the measurements they need.
Copyright © Houghton Mifflin Harcourt Publishing Company

18. Tools of the Trade How are tools used in science?
Unit 2 Lesson 2 Scientific Tools and Measurement
Tools of the Trade
How are tools used in science?
Scientists use different tools to perform experiments.
Hot plates can be used to increase the temperature of a substance.
Test tubes are common containers for holding samples of materials. Test-tube racks hold test tubes upright.
Copyright © Houghton Mifflin Harcourt Publishing Company

19. How are tools used in science?
Unit 2 Lesson 2 Scientific Tools and Measurement
How are tools used in science?
Pipettes can be used to transfer liquids.
Lab journals or notebooks and pencils are tools that scientists use to record data and observations.
A hand lens, compound microscope, or electron microscope can be used to magnify small objects.
Digital cameras are also used to record images of objects and environments to observe at a later time.
Copyright © Houghton Mifflin Harcourt Publishing Company

20. How are computers and technology used by scientists?
Unit 2 Lesson 2 Scientific Tools and Measurement
How are computers and technology used by scientists?
The use of science for practical purposes is called technology. New technology leads to new discoveries.
Calculators and computers allow scientists to compute, display, analyze, record, and model data. They even help scientists to publish their findings.
Probeware, which is a measuring tool linked to a computer, can be used to obtain and display the values of a quantity for long-term study.
Copyright © Houghton Mifflin Harcourt Publishing Company