1. Service Continuity of Enhanced-MBS Document Number: IEEE C802.16m-08/1011 Date Submitted: 2008-9-5 Source: Chun-Yen Wang, Chun-Yuan, Chiu, Fang-Ching (Frank) Ren, Richard Li, Wern-Ho Sheen Voice: ITRI, NCTU/ITRI E-mail: {ChunYen, ccy, frank_ren, richard929, whsheen} Information and Communications Research Laboratories, @itri.org.tw 195 Chung Hsing Rd., Sec.4 Chu Tung, Hsin Chu, Taiwan 310, R.O.C. * http://standards.ieee.org/faqs/affiliationFAQ.html Re : IEEE 802.16m-08/033 - Call for Contributions on Project 802.16m System Description Document (SDD), on the topic of MAC aspects of enhanced MBS Venue: Kobe, JP Base Contribution: N/A Purpose: For discussion and approval by TGM Notice: This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It represents only the views of the participants listed in the Source(s) field above. It is offered as a basis for discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEEs name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEEs sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE 802.16. Patent Policy: The contributor is familiar with the IEEE-SA Patent Policy and Procedures: and.http://standards.ieee.org/guides/bylaws/sect6-7.html#6http://standards.ieee.org/guides/opman/sect6.html#6.3 Further information is located at and.http://standards.ieee.org/board/pat/pat-material.htmlhttp://standards.ieee.org/board/pat

2. Outline Scenario description Service continuity of E-MBS: –Inter-EMBS Zone transition of a connected-state MS –Inter-EMBS Zone transition of an idle-state MS From multi-BS transmission mode to signal-BS transmission mode From signal-BS transmission mode to signal-BS (multi-BS) transmission mode From multi-BS transmission mode to multi-BS transmission mode 1

3. Scenario Description (1) Assumptions: –An E-MBS service area is the coverage of a set of BSs where some E- MBS service(s) is announced and available to be received –A BS within the service area is responsible to forward the associated E- MBS data from gateway by using signal-BS transmission mode or multi-BS transmission mode –Each BS capable of providing E-MBS service belongs to a certain E- MBS Zone, identified by a unique MBS_Zone ID –The same CID and same SA is used for transmitting the content of certain E-MBS service(s) in a E-MBS Zone –Different CIDs or different SAs may be used in different E-MBS Zones for the same E-MBS service 2

4. Scenario Description (2) –A BS is allowed to turn off the transmission of an E-MBS service if there is no subscriber interesting for this service –An MS shall continue to receive E-MBS data within the service area regardless of the MS operation mode (i.e., connected state/idle state ) E-MBS service area signal-BS transmission mode multi-BS transmission mode Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7 3

5. E-MBS Service Continuity of a Connected-State MS Target BS decision: –… E-MBS HO decision: –… HO procedure: –… 4

6. E-MBS Service Continuity of an Idle-State MS During idle state, a MS may have following methods to achieve E-MBS service continuity –Method 1: perform location update procedure to update CIDs when the MS detects a change in E-MBS Zone –Method 2: perform location update procedure when the MS detects a change in E- MBS Zone, unless the MS already has the CID mappings through a CID pre-allocation scheme [1] –Method 3: transit to connected state by network reentry procedure when the MS awakes to a possible inter-MBS Zone transition 5

7. Method 1 If the MS reselects a preferred BS during MS paging unavailable interval, and then detects the change of E-MBS Zone by monitoring the MBS zone identifier list which is transmitted by the new preferred BS in the DCD message, it can update its CIDs and resume content reception through location- update procedure Original preferred BS MS Reselects a preferred BS during MS paging unavailable interval New preferred BS E-MBS HO decision Location-update procedure for CID updating GW E-MBS service resumption perform location update procedure to update CIDs when the MS detects a change in E-MBS Zone… 6

8. Original preferred BS MS Reselects a preferred BS during MS paging unavailable interval New preferred BS E-MBS HO decision GW Location-update procedure for E-MBS service resumption The CID pre-allocation scheme informs MSs within a certain E-MBS Zone regarding the mapping of CIDs used in the current E-MBS Zone to new CID within a neighboring E- MBS zone When an MS moves to a new zones, it can immediately (and internally) update its CIDs and resume content reception without the need to perform CID update through location-update Method 2 perform location update procedure when the MS detects a change in E-MBS Zone, unless the MS already has the CID mappings through a CID pre-allocation scheme[1]… 7

9. preferred BS (SBS) MS TBS GW E-MBS service continuity procedure of a connected-state MS When the MS awakes to a possible inter-MBS Zone transition by some measurements, it transits to connected state by network reentry procedure Method 3 transit to connected state by network reentry procedure when the MS awakes to a possible inter-MBS Zone transition… some measurements trigger network reentry procedure 8

10. From Multi-BS Transmission Mode to Signal-BS Transmission Mode For a E-MBS service using multi-BS transmission mode, gateway is responsible to schedule resource and decides a MCID for the service … Similar to Method 2 9

11. From Signal-BS Transmission Mode to Signal-BS (Multi-BS) Transmission Mode For a E-MBS service using signal-BS transmission mode, BS is responsible to schedule resource and decides a CID for the service Therefore, its neighboring BSs are not aware of the CID used by itself for the service unless the CID pre-allocation scheme proposed in [1] is used In order to avoid the overhead of the CID pre-allocation, we prefer to adopt the method 3 to achieve E-MBS service continuity for this scenario … Method 3 10

12. From Multi-BS Transmission Mode to Multi-BS Transmission Mode It seems like there is no reason to use different resource and MCIDs in two neighboring E-MBS Zones for the same E-MBS service, instead of combining them to a bigger E-MBS Zone If there is some rare reasons resulting in this situation, we think the two neighboring E-MBS Zones should be able to adopt same MCID If there is some rare reasons resulting in different resource and MCIDs used in two neighboring E-MBS Zones for the same E-MBS service, we prefer to adopt the method 1 to handle these rare cases Similar to Method 2 Method 1 11

13. Proposed Text for SDD 15.1: General Concepts Add the assumptions described in page 2-3 15.x: Service Continuity of Enhanced-MBS 15.x.1: E-MBS Service Continuity of an Idle-State MS Add the discussion described in page 4 15.x.2: E-MBS Service Continuity of an Idle-State MS Add the discussion described in page 5-8 12

14. Reference 1.IEEE C802.16maint-08/171r9, Improvement in MBS in 802.16REV2 13