1. CS 3843 Final Exam Review Fall 2013 December 5, 2013

2. Topics What to cover? – Lectures for Chapter 2, Chapter 3 and Chapter 4.1-4.3 – Lectures on truth table, Karnaugh Map – Class notes for Chapters 2-4 What are allowed? – Scientific calculator – Two sheets of note (both sides, standard 11’×8.5’ letter size) – The Y86 encoding diagram will be provided. What is not allowed? – Talking to each other – Other notes and book materials

3. Final Exam Scores Assignments: 20% – Assignment 0 and Assignment 1-6 Quizzes and recitation participation: 10% – Quiz: drop 1 lowest grade out of 5 (5%) – Recitation participation: 5% Midterms: 35% – Two midterms (17.5% each) Final Exam: 35%

4. Any Questions about your grading TA: K. M. Sabidur Rahman Office: FLN (f.SB)3.01.04 Email: kmsabidurrahman@gmail.com

5. Tips Study – Assignments 1-6 and their solutions – Quizzes 1-5 – Practice Problems – Lecture Slides – Practice problems Solutions are available under – http://www.cs.utsa.edu/~qitian/CS3843/

6. Chapter 2 Conversion between different numbering systems – Based R representation and its conversion to decimal – Conversion between decimal, binary, and hexadecimal – Integer and Fraction part Binary representation of n-bit word for signed and unsigned integers – 2’s, 1’s complement and sign/magnitude Boolean operators and logical operators – &, |, ^, ~ – &&, ||, ! Shift operators ( > A, >> L ) Number representations using different data types (int, short, char, long) n-bit IEEE floating-point representation – S, M, E, bias, exp (k bits), frac (n bits) – Single precision and double precision – Normalized, denormalized, special values (+/- inf, NAN) – Largest, smallest value Rounding – Round-to-even; Round-towards-zero; Round-down, Round-up

7. Chapter 3 Trace the register values in given assembly procedure Understand all the IA32 assembly instructions, different operands and memory addressing modes; Understand Assembly Codes and Write Correct Comments

8. Chapter 3 (continued …) Understand Conditional Codes (ZF, SF, OF, and CF) Write C codes from the given assembly codes and vice versa; Identify and correct any mistakes in given assembly instructions

9. Chapter 4 Y86 instruction encodings Translate object code to assembly code Translate Y86 instructions to object code Truth table and basic block diagram of logic gates (AND, OR, NOT, XOR, NAND, NOR), MUX, ALU, 1-bit full adder Function complete set Truth Table and two-, three-, four-varibales Karnaugh- Map – minterm, maxterm, don’t-care term – Minimum sum-of-product solution