1. 10 years of research on Power Management (now called green computing) Rami Melhem Daniel Mosse Bruce Childers

2. Introduction Power management in real-time systems Power management in multi-core processors Performance-Resilience-Power Tradeoff Management of memory power Phase Change Memory

3. Power management techniques Two common techniques: 1)Throttling Turn off (or change mode of) unused components (Need to predict usage patterns to avoid time and energy overhead of on/off or mode switching) 2)Frequency and voltage scaling Scale down core’s speed (frequency and voltage) Designing power efficient components is orthogonal to power management

4. Frequency/voltage scaling Gracefully reduce performance Dynamic power P d = C f 3 + P ind Static power: independent of f. power Static power time C f 3 P ind time When frequency is halved: Time is doubled C f 3 is divided by 8 Energy caused by C f 3 is divided by 4 Energy caused by P ind is doubled Idle time

5. Minimize total energy consumption - static energy decreases with speed - dynamic energy increases with speed Minimize the energy-delay product –Takes performance into consideration Minimize the maximum temperature Maximize performance given a power budget Minimize energy given a deadline Minimize energy given reliability constraints Different goals of power management Energy*delay f P ind / f 2 C f energy Speed (f) C f 2 total P ind / f

6. DVS in real-time systems CPU speed time deadline S max S min Worst case execution Remaining time Utilize slack to slow down future tasks (Proportional, Greedy, aggressive,…) time Static scaling (power management points) Dynamic scaling Remaining time

7. Implementation of Power Management Points Can be implemented as periodic OS interrupst Difficulty: OS does not know how much execution is remaining Compiler can insert code to provide hints to the OS minaveragemax branch loop

8. Example of compiler/OS collaboration Compiler records WCET based on the longest remaining path At a power management hint minaveragemax At a power management point OS uses knowledge about current load to set up the speed

9. Run-time information OS/HW (knows the system) Compiler/OS collaboration Compiler (knows the task) Static analysis Application Source Code PMHs: Power management hints PMPs: Power management points Interrupts for executing PMPs PMHs time

10. DVS for multiple cores Manage energy by determining: The speed for the serial section The number of cores used in the parallel section The speed in the parallel section One core Two cores Slowing down the cores Slowing down the parallel section To derive a simple analytical model, assume Amdahl’s law: - p % of computation can be perfectly parallelized. p Using more cores s

11. Streaming applications are prevalent –Audio, video, real-time tasks, cognitive applications Constrains: –Inter-arrival time (T) –End-to-end delay (D) Power aware mapping to CMPs –Determine speeds –Account for communication –Exclude faulty cores T D Mapping streaming applications to CMPs

12. Mapping a linear task graph onto a linear pipeline If the # of stages = # of cores Core Core Core Core minimize Subject to e i : energy for executing stage i  i : energy for moving data from stage i-1 to stage i t i : time for executing stage i  i : time for moving data from stage i-1 to stage i Find t stage

13. 1) Group the stages so that the number of stages equals the number of cores 2) Use a dynamic programming approach to explore possible groupings 3) A faster solution may guarantee optimality within a specified error bound. CoreCoreCoreCore If the # of stages > # of cores Mapping a linear task graph onto a linear pipeline

14. Timing constraints are conventionally satisfied through load balanced mapping Additional constraint –Minimize energy consumption –Maximize performance for a given energy budget –Avoid faulty cores instance instance A B C E D F G H I J K Mapping a non-linear task graph onto CMP A B C D F E G H I J K Maximum speed Medium speed Minimum speed

15. Turn OFF some PEs Maximum speed/voltage (f max ) instance instance A B C E D F G H I J K A B C D F E G H I J K Medium speed/voltage Minimum speed/voltage (f min ) PE OFF

16. DVS using Machine Learning Characterize the execution state of a core by Rate of instruction execution (IPC) # of memory accesses per instruction Average memory access time (depends on other threads) During training, record for each state The core frequency The energy consumption Determine the optimal frequency for each state During execution, periodically, Estimate the current state (through run-time measurements) Assume that the future is a continuation of the present Set the frequency to the best recorded during training M MCMC core L1 $$ core L1 $$ L2 $$

17. 17 Training phase Runtime Learning engine determine freq. & voltages Integrated DVS policy Auto. policy generator Statistical learning applied to DVS in CMPs.

18. deadline If you have a time slack: 1) add checkpoints 2) reserve recovery time 3) reduce processing speed For a given number of checkpoints, we can find the speed that minimizes energy consumption, While guaranteeing recovery and timeliness. S max Using time redundancy (checkpointing and rollbacks) Energy-Reliability tradeoff

19. More checkpoints = more overhead + less recovery slack D C r Optimal number of checkpoints For a given slack (C/D) and checkpoint overhead (r/C), we can find the number of checkpoints that minimizes energy consumption, and guarantee recovery and timeliness. # of checkpoints Energy

20. Faults are rare events If a fault occurs, may continue executing at S max after recovery.

21. Non-uniform check-pointing Observation: If a fault occurs, may continue executing at S max after recovery. Advantage: recovery in an early section can use slack created by execution of later sections at S max Disadvantage: increases energy consumption when a fault occurs (a rare event) Requires non-uniform checkpoints.

22. Triple Modular Redundancy vs. Duplex TMR: vote and exclude the faulty result Duplex: Compare and roll back if different Efficiency of TMR Vs. Duplex depends on static power ( ), checkpoint overhead and load Duplex is more Energy efficient TMR is more Energy efficient 0.02 0.035 Load=0.7 0.10.2 checkpoint overhead

23. Add memory power to the mix Example : DRAM and SRAM modules can be switched between different power states (modes) – not free: - Mode transition power overhead - Mode transition time overhead Active (779.1 mW) Power-down (150 mW) Standby (275.0 mW) Self-refresh (20.87 mW) 5ns 1000ns5ns auto

24. keep a histogram for patterns of bank accesses and idle time distributions. Use machine learning techniques to select the optimal “threashold” to turn banks off. OS assisted Memory Power Management?

25. Example of compiler assisted Memory Power Management? …. Load x …. Store x …. Load z …. Load y …. Store z …. Store y …. Load x Load y …. Store y Load z …. Store z Compiler transformation Code transformations to increase the memory idle time (the time between memory accesses).

26. Declare A[], B[], C[], D[] …. Access A …. Access D …. Access B …. Access C …. Access B …. Memory allocation Algorithms that use the access pattern to allocate memory to banks in a way that maximizes bank idle times A[], B[] C[], D[] A[], D[] C[], B[] OR Example of compiler assisted Memory Power Management?

27. Phase Change Memory (PCM) A power saving memory technology Solid State memory made of germanium-antimony alloy Switching between states is thermal based (not electrical based) Samsung, Intel, Hitachi and IBM developed PCM prototypes (to replace Flash).

28. Properties of PCM Non-volatile but faster than Flash Byte addressable but denser and cheaper than DRAM No static power consumption and very low switching power Not susceptible to SEUs (single event upsets) and hence do not need error detecting or correcting codes o Errors occur only during write (not read) – use a simple read-after-write to detect errors

29. So, where is the catch? Slower than DRAM factor of 2 for read and 10 for write Low endurance A cell fails after 10 7 writes (as opposed to 10 15 for DRAM) Asymmetric energy consumption write is more expensive than read Asymmetry in bit writing writing 0s is faster than writing 1s

30. CPU Memory Controller DRAM CPU AEB MM PCM Traditional architecture Proposed architecture AEB: acceleration/endurance buffer MM: memory manager Goal: use PCM as main memory Advantages: cheaper + denser + lower power consumption

31. Dealing with asymmetric read/write Use coherence algorithms in which “writes” are not on the critical path. Design algorithms with “read rather than write” in mind Take advantage of the fact that writing 0s is faster than 1s Pre-write a block with 1’s as soon as block is dirty in the cache On write back, only write 0’s.

32. Dealing with low write endurance (write minimization) Block (or page) allocation algorithms should not be oblivious to the status of the block – for wear minimization Modify the cache replacement algorithm ex. LRR replacement (least recently read) Lower priority to dirty pages in cache replacement Use coherence algorithms that minimize writes (write- through is not good) Read/compare/write == write a bit only if it is different than the current content

33. Wear leveling Memory allocation decisions should consider age of blocks (age = number of write cycles exerted) Periodically change the physical location of a page (write to a location different than the one read from) Consider memory as a consumable resource - can be periodically replaced

34. Memory Manager CPU Bus Interface Request Controller Tag Array V St CPU R/W Size Tag AEB PCM Requests Buffer In Flight Buffer (SRAM) FSM DRAM Controller/DMAC PCM Controller/DMAC V D Addr n In Flight Buffer Busy Bitmap AEB Page Cache In Flight Buffer Spare Table PCM Pages Area Spares V D Addr Control bus Data bus Detailed architecture

35. Conclusion Time constrains (deadlines or rates) Energy constrains Reliability constrains It is essential to manage the tradeoffs between Hardware CompilerOS