1. Jacob Ruiz W# 0453857 ET 493-01 Senior Design Instructor: C. Koutsougeras Advisors: R. Rode May 9, 2014 Jacob Ruiz W# 0453857 ET 493-01 Senior Design Instructor: C. Koutsougeras Advisors: R. Rode May 9, 2014

2. Design an eco-friendly commercial strip mall that incorporates energy efficient technology to maximize energy conservation

4. Methodology In order to create an effective energy efficient structure, I must: Design a strip mall Incorporate different energy saving techniques into one design Keep the cost of the project low Minimize energy consumption Create a new and unique design.

5. Green Design Factors Low E Windows Solar Power Water Recycling System LED Lighting Evaporating Water System

6. Low-E Windows

7. Solar Power Solar Power can reduce energy usage up to 40%. The cost of solar energy is high but is no where near as high as the saving that come with it.

8. Water Recycle System System that recycles grey water and uses it for toilet system and sprinkler system. Cuts water usage in half.

9. LED Lighting Using LED lighting instead of regular light bulbs increases light intensity while decreasing power usage.

10. Evaporating Cooling System As water heat it evaporates into the air in turn cooling the air. Also the water acts as a reflective surface which deflects the sunlight away the surface cooling the area around it.

11. Concept Design Progress

12. Autodesk Revit Architecture 2014

13. Outside 3D View

15. First Story Floor Plan

16. West Elevation Plan

17. North Elevation Plan

18. Hall 3D View

19. Cross-Sectional Elevation Plan

20. Restaurant 3D View

21. Project Timeline Fall 2014 8/25 – Write final proposal and Survey Land 9/01 – Work on Site and Foundation Plan 9/08 – Work on Floor Plan 9/15 – Work on Roofing Plan 9/22 – Work on Plumbing and Electrical Plan 9/29 –Work on HVAC Plan 10/6 –Work Finishes and Detailing 10/13 – Work on Material Take-Off and Estimation 10/20 – Continue working on Material Take-Off and Estimation 10/27 – Work on Final Report and Presentation 11/03 – Continue working on Final Report and Presentation

22. QUESTIONS???