1. Report: Mars Returned Sample Quality Workshop Dave Beaty and Yang Liu Jet Propulsion Laboratory California Institute of Technology MEPAG meeting May 14, 2014

2. 2 PRE-DECISION DRAFT: For Planning and Discussion Purposes Only How Important is Sample Quality? Sample Receiving Facility (SRF) Samples Preliminary Examination Returned Sample Science (RSS) HYPOTHETICAL: IF MARS SAMPLES WERE RETURNED TO EARTH, WHAT STATE WOULD THEY NEED TO BE IN TO BE SCIENTIFICALLY USEFUL? TBD Flight System

3. Part 1. Rock Samples

4. Approach PRE-DECISION DRAFT: For Planning and Discussion Purposes Only4 Define science investigations for each potential RSS objective Draft assessment of sample quality factors that might impact RSS science investigations Define draft requirements (w.r.t. RSS) for quality factors Formulate draft requirements for sample quality Pre-Workshop LPSC Workshop March 16 th, 2014 Participants: 30+ sample scientists from universities and NASA centers Review and edit the starting materials above Input on quantifying potential sample quality requirements Prioritize the quality factors Post-Workshop Close out open issues identified at workshop Derive sample quality requirements for M-2020 Continuous involvement of scientists (community, M-2020, program) and engineers (project, program) Focus Group: Carlton Allen, Lars Borg, Dave Des Marais, Chris Herd, Scott McLennan

5. PRE-DECISION DRAFT: For Planning and Discussion Purposes Only Rock Samples: Sample Quality Matrix 5 Potential RSS Science Goals Quality Factors Possible Impact Science Investigations in Each Goal

6. Investigations Related to E2E-iSAG #1: Past Life, Habitability Pre-decisional draft for discussion purposes only: Subject to Revision 6 Sample Preparation Working List of Measurements (method)Purpose PowderMineralsRockGas Morphology (e.g., cells, subcellular structures, cell clusters) (microscopy) Biosignature Rock Fabrics (e.g., stromatolites)Biosignature x Mineral/biogenic minerals (e.g., carbonates, sulfates, phyllosilicates, silicate oxides [e.g., biogenic magnetite, permineralization])(spectroscopy, XRD, etc.) Biosignature xx Organic compounds & Distribution (e.g., lipid biomarkers) (spectroscopy, MS, chromatography, etc.) Biosignature x xx Stable isotopic patterns (e.g., indicators of biological redox reactions) (MS, laser spectroscopy) Biosignature x x Identification of minerals and elemental abundances Habitability-water activities & surface /near-surface processes x x Identification of minerals and elemental abundances Habitability-Chemical building blocks, C, H, P, O, N, S x xx Minerals and elemental abundances(redox state) Habitability-Energy source x xx Identification of minerals and elemental abundances(solvent, T, etc) Habitability & surface /near-surface processes involving water x xx Biogenic gas if anyBiosignature x Example

7. Earth Sourced Contamination Organic/Biological (input from Organic Contamination Panel) Inorganic Magnetic History Mechanical Properties Fracturing Movement of fragments Thermal History Radiation History Sample Gain/Loss Volatiles Cross-Contamination Loss of drilled samples Preserve Mars Chemistry: Chemical/Mineral alteration of sample within/outside containers Part II: Sample Quality Factors & Requirement 7 Mostly Acquisition Mostly Curation Related Mostly Acquisition Mostly Curation Related PRE-DECISION DRAFT: For Planning and Discussion Purposes Only Organic Contamination Panel See example next chart

8. Gain/loss of Volatiles PRE-DECISION DRAFT: For Planning and Discussion Purposes Only8 O= 13 C=O 18 O= 13 C=O O=C=O O H D O H 18 O H Draft Requirement Samples should be acquired, transported, and made available to scientific research in a manner that shall have a greater than 80% confidence that seals for individual samples have a leak rate <TBD cc Mars of He/second. Input from 03-16-14 Workshop Strategy and requirement agreed to limit loss of volatiles to <1% of original water. Additionally, agreement on a non-sealing failure rate (e.g., like 20% of samples can fail to seal). Example See complete list in handout table

9. PRE-DECISION DRAFT: For Planning and Discussion Purposes Only 9 Draft Priority of Sample Quality Factors from 2014 LPSC Workshop Priority of Science Investigations Affected H M L H M L Potential Magnitude of Impact Organic Contamination Fracturing Movement of Fragment Inorganic Contamination Biological Contamination Volatile Loss or Gain Cross Contamination Chemical/Mineral Alteration of Samples within and outside of Containers Thermal History Radiation History Magnetic History Loss of Drilled Samples

10. Part 2. Soil Samples

11. Scientific Significance of Martian Soils 11 Pre-decisional draft for discussion purposes only: Subject to Revision Physical, structural, chemical, mineralogical properties of soils and their lithic components are important for: Climate-soil interactions Differentiation and evolution of Martian crust and mantle Surface/near-surface processes with or without water Habitability Future human exploration (hazards, resource, etc.) Physical, structural, chemical, mineralogical properties of soils and their lithic components are important for: Climate-soil interactions Differentiation and evolution of Martian crust and mantle Surface/near-surface processes with or without water Habitability Future human exploration (hazards, resource, etc.) Focus Group: Mike Mellon, Doug Ming, Dick Morris, Sarah Noble, Rob Sullivan, Larry Taylor,

12. Present Knowledge of Martian Soils 12 Pre-decisional draft for discussion purposes only: Subject to Revision Previous missions analyzed soils to <10-20 cm depth. From the surface to shallow depth, dust- rich and dark soils are typically present (exceptions exist), and chemical variations with depth are observed occasionally. Global, Regional, and Local Input. Broadly basaltic with diversity in soils, e.g., sulfur- or silica-rich soils at Gusev Chemistry suggestive of fluid activity Unconsolidated materials display a wide size range from 10’s of μm to a few mm. NASA/JPL-Caltech/Cornell Silica-rich soil at Gusev Sulfur-rich soil at Gusev NASA/JPL-Caltech/Cornell

13. Soil-related Recommendations 13 Pre-decisional draft for discussion purposes only: Subject to Revision QuestionsRecommendationRationale Need to preserve stratigraphy? Important to sample coarse- scale stratigraphy, but accept that fine stratigraphy can’t be maintained in sample tube Hypotheses related to atm-regolith interactions, or changes with surface/sub-surface conditions Number of samples?Minimum 1-2 soil samples, with the capability for more if peculiar soils are encountered Depend on landing site One for the very top surface; and the other (mature, no dust); if peculiar soils (e.g., sulfur-rich, silica-rich) or stratigraphy are encountered Collect rock fragments? Yes as long as they fit in the sampling holder Soil may contain rock types not sampled by rovers or meteorites The final sampling strategy is landing-site dependent, and would consist of numerous ad hoc decisions until we have a chance to interrogate the Mars-2020 site on the surface Sample quality requirement for rocks can be applied to soils

14. Summary Understanding the relationship between the condition of the samples as received by a potential future analyst, and the science that could be achieved, is central to understanding the cost/benefit relationships of Mars Sample Return. Feedback from all sectors of the community on this draft analysis is encouraged. Please send comments to: – Dave Beaty, david.w.beaty@jpl.nasa.govdavid.w.beaty@jpl.nasa.gov – Yang Liu, yang.liu@jpl.nasa.gov Pre-decisional draft for discussion purposes only: Subject to Revision14