Presentation is loading. Please wait.

Presentation is loading. Please wait.

By Cleophas Kiio Director, ICT 15-sep-101 The Best Practices in Census Data Processing Operation: Case of 2009 Census:

Similar presentations


Presentation on theme: "By Cleophas Kiio Director, ICT 15-sep-101 The Best Practices in Census Data Processing Operation: Case of 2009 Census:"— Presentation transcript:

1 By Cleophas Kiio Director, ICT 15-sep-101 The Best Practices in Census Data Processing Operation: Case of 2009 Census:

2 Overview Data processing Activities Review Planning for Data processing Setting the Data processing site Implementation Data capture Analysis Dissemination Archival 15-sep-102

3 Data Processing Activities Review DP follows the completion of field data collection and entails the following: Capture Cleaning/Editing Tabulation Analysis Dissemination Archival 15-sep-103

4 Planning for Data Processing (DP) 15-sep-104 1.Identification of Methodology/technology: – Keying From Paper (KFP) - Manual Data Entry largely used in KNBS for small Surveys – Keying From Image (KFI) -scanning – Optical Mark Reading (OMR)- scanning – Optical/Intelligent Character Recognition (OCR/ICR) - scanning – Online data capture – use of pc – Use of mobile devices (PDA) For the 2009 Census, KNBS chose scanning technology with OCR/ICR having used the same in the 1999 Census. A study tour the US Census Bureau was conducted to understudy the best practices. Major considerations were the budget and availability of technical knowhow.

5 Planning for Data Processing (DP) cont’d 2.Selection of Tools and Equipment: Computers – acquired 125 high capacity computers with duo screens. Servers- 3 high-end servers did the census (32 GB memory, multiple processors, 1 Terabyte secondary storage each) Storage – 3 high capacity Storage Area Networks (SANs) were procured initially 5 Terabytes (TB) each but later upgraded to 14 TB each. Software- – Capture software - with the challenges faced the 1999 census where the bureau used the AFPS pro from Top Image Systems (TIS), the Bureau chose to use the iCADE system ( integrated Computer Assisted Data Entry System) developed by the US Census Bureau. – Cleaning/tabulation- Cspro (Census and Surveys Processing software) Scanners- 3 new Kodak 1860 high volume scanners were acquired in addition to the 2 existing Kodak 1900 scanners used during the 1999 Census. Capable of scanning over 200 ppm. Network infrastructure- all computers, scanners, servers and SAN were connected in a wide area network (WAN) 15-sep-105

6 Planning for Data Processing (DP) cont’d 3.Design of Questionnaires As standard practice questionnaires are developed and designed with technology to be used in mind. The 2009 Census questionnaires were designed by highly trained Bureau staff. Technical support was offered by the US Census Bureau Precision in design was critical for compatibility with the iCADE system. 15-sep-106

7 Setting Up the DP Site 1.Planning the layout (library, KFI, OCR/Manual registration, server room, editing ) 2.Installing the computer network 3.Installing the power supply system and provisioning for power backup system: UPS and generators 4.Installing the furniture, lifts and Air-conditioning 5.Procuring high bandwidth internet. 6.A ware house for storage 7.Recruitment of staff 15-sep-107

8 8 – Installation Systems and testing was completed after census enumeration – Integrated Computer Aided Data Entry (iCADE) system training – In 2009 we had approximately 12 million A3 questionnaires. – Engaged close to 500 personnel for the processing. – Processing took less than a one (1) year to complete Implementation

9 Tracking of questionnaires done with a custom made tracking system with inbuilt geocode list to ascertain completeness and flow control Guillotining- trimming/cutting off the spirals iCADE system processes o Batching- registering books from each EA in the iCADE o Scanning o Auto and Manual registration o Exception review o OCR review o Key From Image (KFI) 15-sep-109 a) 2009 Data Capture Processes

10 15-sep-1010 Exception Review Check-in and Guillotining Batching Scanning Library (Questionnaires Holding area) Images and Script files database Server/SAN Auto and Manual Registration Key From Image (KFI) OCR Review Output Data Server/SAN Minimum Interaction Process Flow iCADE Processes flow

11 Capture Output –Captured data was output to a text file then auto-formated as input to the CSPro software –OCR characters read: 2,485,008,272 with an accuracy rate of 99.86% (0.14% error) –KFI characters keyed: 228,771,647 with a 99.94 accuracy rate (0.055%error) –This means the OCR read over 90% of the characters with a very high accuracy rate (OCR review definitely helped get this accuracy rate but customization algorithms had to be added to the quality). –22,326,373 images from the census questionnaires –273,201 books in 144,098 batches –10,602 batches went to exception review and 133,496 batches bypassed Exception Review altogether and went straight into OCR. 15-sep-1011

12 15-sep-1012 b) 2009 Data Analysis – KNBS used CSPro a freeware from the US Census Bureau. – This process required: – Subject matter specialists provide editing rules – Programmers implement editing rules through programs – The team developed the editing program with which data is cleaned.

13 Editing/cleaning and Imputation 15-sep-1013 Systematic inspection of invalid and inconsistent responses, and subsequent manual or automatic correction according to predetermined rules (edit specs). Imputation is the procedure of assigning values to missing, invalid, or inconsistent data using a set of predefined criteria embedded to an editing program.

14 Why Edit and Impute? Clean up data to facilitate analysis Identify types and sources of error Improve quality of census data Errors must be detected and their causes identified Appropriate corrective measures are taken to improve the overall data quality. 15-sep-1014

15 15-sep-1015 Graphic flow of Editing and imputation Editing and Imputation (Edit Specs) Data Cleaning Program iCADE Output Data Codes book (Dictionary) Clean Data

16 c) Data Tabulation – Process of producing data outputs (tables, frequencies, cross-tabulations,…) – Requires subject matter specialists to prepare dummy output layouts supported programmers – Data in then presented in this tabular layouts. 15-sep-1016

17 15-sep-1017 Graphic flow of Tabulation Reports Preferred Presentation (Tabulation Specs) Tabulation Program Volume IA Clean Data Volume IB Volume ICVolume II … Codes book (Dictionary) Area Names

18 d) Data Dissemination – Providing public with information through census books, fliers, CDs, DVDs, online databases (Census info, IMIS, sms service) e) Data Archival – Documentation for permanent storage for further and future analysis 15-sep-1018

19 15-sep-1019 – Ware-house was located about 10Km from processing centre – Inadequate processing space – Printing was not perfect this affected the OCR – Limited number and constant breakdown of the KNBS dedicated lift slowed down processing. – Power outages posed a major challenges – Being a new system, there was a cautious and slow acceptance of the system. Challenges

20 15-sep-1020 – Comprehensive DP plan be developed with clearly defined objectives: 1.Efficiency and effectiveness to process in the shortest time possible. 2.Control cost of processing to avoid budget overruns. 3.Quality data output – Carry out risk analysis beforehand to identify potential pitfalls and put in place mitigation measures. Best practices: Lessons learnt

21 15-sep-1021 Best practices: Lessons learnt cont’d – Cartographic mapping be completed 1 year before census – geographical codes and related documentation (geo-codes) to be ready 6 months before enumeration. – Timely acquisition of census tools and equipment – DP site be ready 6 months before enumeration date for test runs. – Technical and maintenance support measures must be instituted and enforced.

22 15-sep-1022 – Questionnaires and manuals be ready 5 months before census date to allow for logistics and pretesting. – Total quality control at the printing press must be ensured for precision printing. – Recruitment and training of staff be done before the census date. – DP site be located in close proximity to the questionnaire warehouse Best practices: Lessons learnt cont’d

23 15-sep-1023 Conclusion Despite the challenges, it was possible to complete DP in less than a year after census. However better planning and organization of the exercise it possible to complete the exercise within 6 months after enumeration. The lessons learnt may form the recommendations that if adopted the above can be attained.

24 15-sep-1024

25 15-sep-1025 Thank You!


Download ppt "By Cleophas Kiio Director, ICT 15-sep-101 The Best Practices in Census Data Processing Operation: Case of 2009 Census:"

Similar presentations


Ads by Google