1. Version 5.0 to Version 10.2 Hardware-, Software- and Prozess-Upgrade DESY MKS-2

2. Versions 5 to 10.2 Hardware Upgrade Hardware Hardware Upgrade Overview Was ist Kompatibel? Version 5 to 10.2 Micro Chassis I/O Families Kabel

3. Versions 5 to 10.2 Hardware Upgrade Ausführung Was muß geändert werden ? Version 5 to Version 10.2 – All PCMs Micro Chassis

4. Versions 5 to 10.2 Hardware Upgrade Voraussetzungen What are the PC Requirements? Version 10 and up Operating System Software What Networking Changes are Required? Version 9 and Version 10 to 11 For the PCM For the PC

5. Versions 5 to 10.2 Hardware Upgrade Was ist Kompatiebel? Version 5 to Version 10.2 T386/486, and Pentium 586 CPU boards Ethernet link 0 and link 1 Cards UTB - Utility Board - No Change PSA - Process Select Assembly - No Change RLink Token Ring Card is NOT supported with V10 PCMI DCM PCMII CDCM PCMIII PCM2000 OCM PVN PVX ? ? ? ? ? ? ? ? ?

6. Versions 5 to 10.2 Hardware Upgrade All previously supported I/O families are still supported 16000 GPXIO Siemens 505 Remote Modicon Remote Modicon Quantum Quantum High Density Modbus + A-B Data Highway + Data Highway+ Modbus + Modicon P810 Modicon J890 Modicon BXXX Modicon BXXX Modicon BXXX Modicon BXXX S908 AB I/O CDCM Redundant TCP/IP Ethernet Communications Siemens I/O PLC 5/40 Modicon PLC Windows NT Display Node Multi-Monitor Console PCM 2000 Operator Workstation Was ist Kompatiebel? PCM 4100

7. Versions 5 to 10.2 Hardware Upgrade I/O Family Additions Version 10.1 Redundant Profibus Multiple 505 I/O Redundancy Schemes Version 10.2 Redundant /Non Redundant ControlNet TM Foundation Fieldbus Connectivity Through OPC Modbus Controlnet H1 PLC 5/40 1771 I/O PCM D/3 Hybrid Process Controllers Redundant TCP/IP Ethernet Communications CDCM Was ist Kompatiebel? PCM 4100

8. Versions 5 to 10.2 Hardware Upgrade Version 5 to Version 10.2 I/O Families PIO Multibus 16000 I/O Board No Change Intel 544 Multibus GPXIO Board No Change Intel 86/35 GPXIO Board No Change Was muß geändert werden ?

9. Versions 5 to 10.2 Hardware Upgrade Version 5 to Version 10.2 - I/O Families SST Multibus Modbus+ Board No Change SST Multibus Data Highway+ Board No Change SST Multibus Profibus Board No Change SST Multibus ControlNet Board No Change Rockwell Multibus ControlNet Board No Change Was ist Kompatiebel?

10. Versions 5 to 10.2 Hardware Upgrade Version 5 to Version 10.2 - I/O Families NEW ISA PIO Card NEW PCI MRIOC Card NEW PCI Modbus Plus Card NEW PCI Data Highway Plus Card NEW PCI Profibus Card NEW PCI ControlNet Card Was ist Kompatiebel?

11. Versions 5 to 10.2 Hardware Upgrade Micro Chassis CPU - Version 5 zu Version 10.2 386/486 CPU cards require upgrade of SBoot PROM Patapsco, Interlan or IDEA Ethernet Cards used for Link0 and Link1 IDEA card recommended for RLINK (3 Jumper settings) 40 - Link E0 60 - Link E1 50 - R-Link Crossover Cable used for RLink Was muß geändert werden ? PROMs

12. Versions 5 to 10.2 Hardware Upgrade Was muß geändert werden ? Micro Chassis CPU - Version 5.0 to Version 10.2 Replace 4 Boards with 1 The 586 Pentium CPU and MFDC (Multi Function Daughter Card) PROM upgrade required Included on the MFDC are 3 Independent Ethernet ports for: R-Link E1 E0 One 3-port parallel connector To connect to a PCMI/PCMII UTB RLink E1 E0

13. Versions 5 to 10.2 Hardware Upgrade Was muß geändert werden ? MRIOC Board - Version 5 zu Version 10.2 Prom Upgrade Standard I/O Modules V5 - V10.2 Hi Density I/O Modules V10.1 - V10.2 PROM

14. Versions 5 to 10.2 Hardware Upgrade Was muß geändert werden ? Micro Chassis - Version 5.0 to Version 10.2 New 4 Slot PICMG Backplane Holds: 886 ROBO-678-GSE PICMG CPU On-board Ethernet Link 0, Link 1 and R-Link Up to 3 of the 6 I/O Controller Boards New IUA (Intelligent Utility Assembly) SSB (Status Supervisory Board) SMB (Status Monitor Board) New MSA (Micro Select Assembly)

15. Versions 5 to 10.2 Hardware Upgrade Was sind die PC Voraussetzungen? CDCM Minimum Requirements Operating System 600MHZ Pentium 256 MB RAM 8+ MB Video RAM TotalVision, InstAlarm, & Trending 20 GB Hard Disk Software Windows 2000 Server with Client Access Licenses Internet Explorer 5.0 Optional Office 2000 for MDL Excel

16. Versions 5 to 10.2 Hardware Upgrade Was sind die PC Voraussetzungen ? DCM Minimum Requirements V10+ Operating System 450MHZ Pentium 256 MB RAM 8+ MB Video RAM 9 GB Hard Disk Software V10+ Windows 2000 Server with Client Access Licenses

17. Versions 5 to 10.2 Hardware Upgrade Was sind die PC Voraussetzungen? OCM Minimum Requirements V10+ Operating System 400MHZ Pentium 128 MB RAM 8 MB Video RAM 4 GB Hard Disk Software V10+ Windows 2000 Professional

18. Versions 5 to 10.2 Hardware Upgrade Welche Netzwerkänderungen sind notwendig For the PCM V5 to V 10.2 Along with the E-net Card MAC Address, each PCM now has a TCP/IP Address D/3 should be on a separate network DHCP or Server assigned IP addresses NOT supported. Addresses must be loaded at DCM node and in WinCOD Should be connected to other facility networks through routers DCMs and OCMs communicate at 100Mbps PCM has optional 100Mbps Full Duplex communication Loaded to the PCM automatically When the PCM and CDCM are both booted the CDCM establishes PCM communication through the MAC Address and transmits the Ethernet address to the PCM. Each Mac address (E0 & E1) will need a TCP/IP address E0 & E1 TCP/IP addresses must be on different subnets

19. Versions 5 to 10.2 Hardware Upgrade Welche Netzwerkänderungen sind notwendig For the PC 10.2 Determine number and names of Nodes (C/DCMs) Setup Nodes in WinCOD Network address for the PC (Network Neighborhood) and that node in WinCOD must match. Node License Loaded on a specific Node Linked to a MAC address or Sentinel Floating License Loaded on License Server Served to users on 1st come 1st served basis