1. 1

2. 2 4:00 - 4:05 PmWelcome 4:05 - 4: 30 PmDOK Activity Recap 4:30 - 5:00 PmStandards alignement to DOK 5:00 - 6:00 PmTest Items 6:00 - 6:15 PmPrayer Break 6:15 - 7:15 PmItem writing activity related to DOK 7:15- 7: 30 PmSurvey and Feed back

3. 3

4. 4 Why would you want to align your curriculum? What should you align it with?

5. 5 Curriculum alignment means assuring that the material taught in the school matches the standards and assessments set by the state or district for specific grade levels.

6. 6

7. 7

8.  Is the Qatar national curriculum aligned to the Grade-Level Expectations (GLEs)? ◦ Does the curriculum have measurable goals and objectives? ◦ Do the measurable goals and objectives aligned to the GLEs at the appropriate grade level? ◦ In your Grade level Please discuss and present your thoughts 8

9. 9  Review your grade level standards and benchmarks.  Review the grade level before you and the grade level after you.  Identify where in your curriculum the standard/benchmark is assessed and how it is assessed.  Identify where in your curriculum the standard/benchmark is taught and how it is taught.

10. 10

11. 11

12. 1. True-false items 2. Matching types 3. Completion or fill in the blanks 4. Multiple-choice type items 5. Constructed response (Short – Extended) 6. Essay 12

13. Item TypeAverage Response Time True-false30 seconds Matching and Ordering 30 seconds per response Completion60 seconds Multiple-choice60 – 90 seconds Short Answer120 seconds Essay10 – 30 minutes 13

14.  Provide clear and understandable directions to students about how to respond.  Be sure the items themselves are clear (unambiguous) to students.  Do not provide unintentional cues regarding the correct response.  Use grammar and vocabulary consistent with the source of instruction.  Write the item so that it measures the specified learning target. 14

15.  Work in groups according to the subjects( Two groups from each subject).  Choose one card( choose one type of question).  Each group read about the type of question, choose good examples for this type of question.  Each group present their type of question. 15

16. 16

17. MC items consist of …. ◦ A stem,  Either a direct question, or  An incomplete statement to be completed. ◦ A correct answer, and ◦ Two or more distracters or foils. 17

18. ◦ a wide sampling of content or learning outcomes. ◦ a reduced guessing factor when compared to true-false items. ◦ different response alternatives which can provide diagnostic feedback. versatility in measuring all levels of cognitive ability. ◦ highly reliable test scores. 18

19. ◦ are difficult and time consuming to construct. ◦ lead an instructor to favor simple recall of facts. ◦ somewhat susceptible to guessing. ◦ place a high degree of dependence on the students reading ability and instructor's writing ability. 19

20. ◦ Present a single, definitive problem ◦ Use a question format ◦ Appropriate level of difficulty ◦ Active voice 20

21. 21 The Stem 1. When possible, state the stem as a direct question rather than as an incomplete statement. Alloys are ordinarily produced by How are alloys ordinarily produced?

22.  Comparable in content, length, & logic  Non-repeating  Logically or numerically ordered  Avoid “All of the above” and “None of the above”  Plausible distracters 22

23. 23 Options avoid repetitive words Adjectives or adverbs are highlighted when they reverse or alter the meaning of a stem

24.  Words like not and except should be emphasized.  These can be used, but only when it is important to do so.  The use of “all of the above” or “none of the above” used only when necessary 24

25. Examples of uses of not and except 1.Which of the following qualities least affects the reliability of a test? 2.All of the following represents types of validity EXCEPT… 3.The quality that is not an advantage of multiple-choice items is… 4.ALL BUT WHICH ONE of the following is... 25

26. 26

27.  Major advantage of constructed-response items: ◦ They elicit responses that more closely resemble real-life behavior. 27

28. 1.Use direct questions rather than incomplete statements. 2.Write items so that the correct response is concise (a few words or a short phrase). 3.Write items so that they can be scored efficiently. 4.Be sure there is a highly limited set of correct responses. 5.Think of the correct response, then write the item. 28

29. 29

30.  Open-ended Questions  Require several sentences or brief paragraph  Require higher level thinking (than simple recall) and the application of students’ knowledge ◦ Making Comparisons ◦ Identifying Patterns ◦ Evaluating Points of View ◦ Making Generalizations ◦ Synthesizing Information  Allow for the examination of Student Thinking  Scored using a Rubric that provides varying degrees of Credit 30

31. “The notion that learning comes about by accretion of little bits is outmoded learning theory. Current models of learning … contend that learners gain understanding when they construct their own knowledge and develop … interconnections among facts and concepts …” 31

32. Consider the VERB of the Content Expectation:  Generate new questions that can be investigated in the laboratory or field.  Use empirical evidence to explain and critique the reasoning used to draw a scientific conclusion or explanation.  Draw isomers for simple hydrocarbons. 32

33.  Set the Context ◦ Specify the knowledge to be brought to bear  Specify the Reasoning ◦ Use specific verbs e.g. analyze, cite, describe…  Point the Way ◦ Inform students of the criteria that will be applied to evaluate their responses  Develop the Scoring Rubric ◦ Clear articulation of the appropriate evaluation criteria by which to judge the quality of student responses. 33

34. B1 Identify scientific tradeoffs in design decisions and choose among alternative solutions. AND B4 Recognize that genetic engineering techniques provide great potential and responsibilities. “Some people believe that recombinant DNA technology has serious disadvantages. Describe one disadvantage that might result from the use of recombinant DNA technology. Then describe a plan or a policy for dealing with the disadvantage that could be followed by research scientists, doctors, public officials, or other people who are involved with recombinant DNA technology and its uses.” 34

35. Complete (3): Student response describes a reasonable disadvantage of recombinant DNA technology and provides a clear description of a plan for dealing with the disadvantage. Credited disadvantages (1 pt) include: ◦ Regulation of new strains ◦ Production of dangerous organisms ◦ Genetic Similarity - loss of diversity ◦ Regulation of applications/patents Credited acceptable plans (2 pts) include: ◦ Informed consent ◦ Regulation ◦ Thorough testing ◦ Oversight committee Essential (2): Student response describes a reasonable disadvantage and attempts a brief description of a plan for dealing with this disadvantage (e.g., test or observe, research further). OR Student response provides only a description of a plan. Partial (1): Student response describes a reasonable disadvantage of genetic technology but does not develop a plan for dealing with the disadvantage. Unsatisfactory/Incorrect (0): Student response states that there are no disadvantages, or states a disadvantage that is inaccurate or unreasonable. 35

36. “Student response states that making new kinds of viruses and mutations are a disadvantage, and outlines a plan that involves experimentation with human cells outside the body.” 36

37. “Student response discusses the production of dangerous viruses, and attempts a brief description of a plan.” 37

38. “Student response explains that the intermixing of genes could result in the production of nontreatable diseases. No plan is given.” 38

39. “Student response does not give a clear disadvantage, and states merely that these people should stop messing around with recombinant DNA technology.” 39

40. SI(P )Analyze information from data tables and graphs to answer scientific questions. “One characteristic that can be used to identify pure metals is density. If you determine the density of a pure metal, you can determine what the metal is, as shown in the table below. Suppose that you determine that a metal ring has a density of 15.3 grams/cm 3. Assume that the ring is a mixture of some combination of the metals listed in the table. What can you determine about its composition from its calculated density? Explain your answer.” 40

41. B Explain that cellular differentiation results from gene expression and/or environmental influence (e.g., metamorphosis, nutrition). Sample Item: “Biologists know that nearly all cells in a person's body contain the same genes. For example, kidney cells contain the same genes as the cells that normally make hemoglobin. Given these facts, explain why kidney cells do not make hemoglobin even though they contain the hemoglobin gene.” 41

42. L Explain how animal systems (digestive, circulatory, respiratory, skeletal, muscular, nervous, excretory, and reproductive) work together to perform selected activities. Sample Item: “When you exercise strenuously, your body produces excess heat. Describe at least two things your body does to help prevent your temperature from rising excessively, and explain why the body's response is effective.” 42

43.  A scenario-based question provides a series of statements that outlines a scheme or sequence of events in summary form, followed by a question concerning what should be discovered or deduced from the scenario.

44.  Scenario-based items can utilize these forms of question construction formats after presenting the situation under investigation. What is the nature of the problem? What is needed to solve the problem? What will occur from......? What is a solution? If this happens, what should be done? What is the most effective or efficient solution? Why is … the most effective solution?

45. What would happen if ….? Given …. what is the primary cause? On the basis of …, what is the primary cause?

46. What is the most effective (appropriate) method for ….? What is better (or worse) ….? What is the most critical step in this procedure? What is (un)necessary in a procedure?

47. 1. Assess understanding beyond rote recall. ◦ There should be more than one way to answer a question. ◦ There should be opportunities for students to earn partial credit. 47

48. 2. Keep the item within a reasonable scope. ◦ Avoid questions that are so broad that a knowledgeable person could write multiple pages on the subject. EXAMPLE: Poor: Explain kinetic energy and gravitational potential energy. Better: A pencil rolls across a tabletop and then falls to the floor. Describe the changes in the kinetic energy and gravitational potential energy of the pencil as it rolls, falls, and lands on the floor. 48

49. 3. Define the task specifically. ◦ Don’t expect students to “read between the lines.” EXAMPLE: Poor: Describe the differences between various types of rocks. Better: Describe three differences between igneous and sedimentary rocks. 49

50. 4. Break a complex task into parts. ◦ Makes an item more accessible to students. ◦ Put tasks in a logical sequence (first part is often at lower cognitive level than later parts). ◦ Avoid redundancy. EXAMPLE: Poor: Juan and Valerie are designing an experiment to test whether a pesticide affects tomato plant growth. Identify four possible variables in this experiment. Choose one of these and explain how it can be controlled and how the results might change if it were not controlled. Better: Juan and Valerie are designing an experiment to test whether a pesticide affects tomato plant growth. A.Identify four possible variables in this experiment. B.Choose one of these and explain how it can be controlled. C.Explain how the results of their experiment might change if this factor were not controlled. 50

51. 5. Use verbs that discourage one-word responses. ◦ Avoid questions that can be answered simply “yes” or “no.” EXAMPLES: “Explain” or “Illustrate” vs. “Name” or “List” 51

52. 6. Use caution when asking subjective questions. ◦ Items should not intrude on student privacy. ◦ Do not ask students how they feel. ◦ Do not ask students to relate things to personal experience. ◦ Any explanation or justification for a student’s response should be based on the stimulus material. 52

53. 7. Write the scoring rubric at the same time as the item. ◦ Include examples of “correct” or “partial” responses. 8. Critique and confirm that the item elicits the intended response. ◦ Aligned to a specific Content Expectation. ◦ A common error is to ask one question, but base the scoring rubric on an answer that really corresponds to another related question that goes into more depth than what is asked. 53

54. Advantages: Unique advantage: Can assess ability to communicate in writing (synthesize, evaluate, compose). Other advantages: 1.Provide more direct measures of behaviors specified in performance objectives. 2.Require the student to produce a response. 54

55. Scoring is less reliable (more subjective). 1.Inconsistent within teachers across multiple scorings of the same responses. 2.Inconsistent within teachers across students. 3.Inconsistent among teachers on the same responses. Provides less adequate sampling of content domain. More time-consuming to score. 55

56. 1. Convey a clear idea of how extensive a response is expected:  Ten minutes or less (typical for a restricted- response essays).  Specify a range for the number of words or the amount of time to be spent on the response.  Make the distribution of points obvious. 2. Develop a suitable scoring plan (rubric):  Would different readers assign the same score?  Describe what constitutes a correct and complete response.  The rubric should be obvious to knowledgeable students.  You do not have an essay item unless you have a rubric! 56

57. Physics: 1. Describe briefly Rutherford's experiment probing the structure of the atom and explain why the result was a surprise. 2. Do you think a photon is more like a wave or more like a particle? Explain why you think so. 57

58. Biology: 1. Homeostatic maintenance of optimal blood glucose levels has been intensively studied in vertebrate organisms. (a) Pancreatic hormones regulate blood glucose levels. Identify TWO pancreatic hormones and describe the effect of each hormone on blood glucose levels. (b) Compare the cell-signaling mechanisms of steroid hormones and protein hormones. 58

59. Chemistry: 1. Give one method of preparation of ozone. Write two oxidizing and two reducing properties of ozone with equations. 2. Write any two methods of preparation of Aniline with equation. How does Aniline react with a) Nitrous acid and b) Chloroform in the presence of alcoholic KOH. 59

60. Bring a chapter test and identify on it test items (Multiple choice – Constructed Responses items) Note: Modify the items if it is needed according to the rules of test items and higher DOK. 60

61. 61 http://secondaryproficient2011.wikispaces.com/