Presentation is loading. Please wait.

Presentation is loading. Please wait.

HC49U/HC49T Frequency Range: 1.8Mhz~100Mhz Load Capacitance: 8pf~35pf, serials are available Frequency Tolerance: +/-5ppm to +/-50ppm are available, +/-30ppm.

Published byOctavia White Modified over 8 years ago

Similar presentations

Presentation on theme: "HC49U/HC49T Frequency Range: 1.8Mhz~100Mhz Load Capacitance: 8pf~35pf, serials are available Frequency Tolerance: +/-5ppm to +/-50ppm are available, +/-30ppm."— Presentation transcript:

1 HC49U/HC49T Frequency Range: 1.8Mhz~100Mhz Load Capacitance: 8pf~35pf, serials are available Frequency Tolerance: +/-5ppm to +/-50ppm are available, +/-30ppm standard Temperature Stability: +/-5ppm to +/-50ppm are available, +/-50ppm standard Operating Temperature Range: -10C~+60C, -20C~+70C, -30C ~ +85C, -40C~+85C Storage Temperature: -55C ~ +125C Shunt Capacitance: 7pF max Drive Level: 0.01uW~1mW Insulation Resistance: 500(DC500+/- 10V) min Aging: +/-5ppm Max

2 HC49S/HC49SMD Frequency Range: 3.0Mhz~75Mhz Load Capacitance: 8pf~35pf, serials are available Frequency Tolerance: +/-5ppm to +/-50ppm are available, +/-30ppm standard Temperature Stability: +/-5ppm to +/-50ppm are available, +/-50ppm standard Operating Temperature Range: -10C~+60C, -20C~+70C, -30C ~ +85C, -40C~+85C Storage Temperature: -55C ~ +125C Shunt Capacitance: 7pF max Drive Level: 0.01uW~1mW Insulation Resistance: 500(DC500+/- 10V) min Aging: +/-5ppm Max

3 UM-1/UM-5 Frequency Range: 8.0Mhz~125.0Mhz Load Capacitance: 8pf~35pf, serials are available Frequency Tolerance: +/-5ppm to +/-50ppm are available, +/-10ppm standard Temperature Stability: +/-5ppm to +/-50ppm are available, +/-10ppm standard Operating Temperature Range: -10C~+60C, -20C~+70C, -30C ~ +85C, -40C~+85C Storage Temperature: -55C ~ +125C Shunt Capacitance: 7pF max Drive Level: 0.01uW~1mW Insulation Resistance: 500(DC500+/- 10V) min Aging: +/-3ppm Max

4 Crystal SMD( 7x5mm, 6x3.5mm, 5x3.2mm, 4x2.5mm ) Frequency Range: 10.0Mhz~60.0Mhz Load Capacitance: 8pf~35pf, serials are available Frequency Tolerance: +/-5ppm to +/-50ppm are available, +/-30ppm standard Temperature Stability: +/-5ppm to +/-50ppm are available, +/-50ppm standard Operating Temperature Range: -10C~+60C, -20C~+70C, -30C ~ +85C, -40C~+85C Storage Temperature: -55C ~ +125C Motional Resistance: 50~70 ohm Drive Level: 0.01uW~1mW Aging: +/-5ppm Max Operation Mode: 10Mhz~40Mhz is Fundamental, 30~60Mhz is Overtone

5 AT38/AT39/AT310 Frequency Range: 3.579Mhz~60Mhz Load Capacitance: 8pf~35pf, serials are available Frequency Tolerance: +/-10ppm to +/-50ppm are available, +/-30ppm standard Temperature Stability: +/-10ppm to +/-50ppm are available, +/- 50ppm standard Operating Temperature Range: -10C~+60C, -20C~+70C, -30C ~ +85C, -40C~+85C Storage Temperature: -55C ~ +125C Shunt Capacitance: 7pF max Drive Level: 0.01uW~1mW Insulation Resistance: 500(DC500+/- 10V) min Aging: +/-5ppm Max

6 DT38/DT26/DT15 Frequency Range: 32.000Khz~120.000Khz,192Khz Load Capacitance: 6pf~max, 12.5pf standard Frequency Tolerance: +/-10ppm to +/-50ppm are available, +/-20ppm standard Serials Resistance: 32Khz~38Khz: 50k ohm max; 38Khz~50Khz: 30k ohm max; 50Khz~74Khz: 25k ohm max; 74Khz~100Khz: 22k ohm max; 100Khz~120Khz: 15k ohm max; 192Khz: 10k ohm max; Motional Capacitance: 3.0fF max Shunt Capacitance: 1.5fF max Drive Level: 0.01uW~1mW Insulation Resistance: 500M ohm min Aging: +/-3ppm Max

7 FTX32.768k12.5SM8 Serials Frequency Range: 32.768Khz, 20.000Khz~165.000Khz Load Capacitance: 6pf~max, 12.5pf standard Frequency Tolerance: +/-10ppm to +/-50ppm are available, +/-20ppm standard Serials Resistance: 20Khz~30Khz: 55k ohm max; 30Khz~40Khz: 45k ohm max; 40Khz~60Khz: 20k ohm max; 60Khz~70Khz: 15k ohm max; 70Khz~120Khz: 12k ohm max; 120Khz~165Khz: 10k ohm max; Motional Capacitance: 1.8fF TYP for 32.768Khz; 4.0fF to 0.6fF for 20.000Khz~165.000Khz Shunt Capacitance: 1.9pF for 32.768Khz; 1.9pF to 0.6pF for 20.000Khz~165Khz Insulation Resistance: 500M ohm min Aging: +/-3ppm +/-5ppm per year

8 HC49U/HC49T MCF-1 Model Frequency Pass Band W Stop Band W Ripple Insertion Terminal Impedance ------- MHZ KHZ/dB KHZ/dB dB dB Rt//Ct(ohm/pF) - FT10L07A 10.695 +/-3.75/3 +/-20/20 0.5 2.0 1800//5 - FT10L15A 10.695 +/-7.50/3 +/-25/18 0.5 2.0 3000//2 - FT10L20A 10.695 +/- 10.0/3 +/-70/18 0.5 2.0 2-3000 - FT10M07A1 10.7 +/-3.75/3 +/-18/20 0.5 2.0 1800//5 - FT10M07A2 10.7 +/-3.75/3 +/-20/20 0.5 2.0 1800//5 - FT10M12A 10.7 +/-6.00/3 +/-20/18 0.5 2.0 3000//3 - FT10M15A 10.7 +/-7.50/3 +/-25/18 0.5 2.0 3000//2 - FT10M20A 10.7 +/-10.0/3 +/-70/18 0.5 2.0 2-3000 - FT10M30A 10.7 +/-15.0/3 +/-50/18 0.5 2.0 5500//1 - FT10M07B1 10.7 +/-3.75/3 +/-14/403 1.0 2.5 1800//4 - FT10M07B2 10.7 +/-3.75/3 +/-15/40 1.0 2.5 1500//4 - FT10M12B 10.7 +/-6.00/3 +/-20/24 1.0 2.5 2800//4 - FT10M15B1 10.7 +/-7.5/3 +/-25/40 1.0 2.5 3000//1 - FT10M15B2 10.7 +/-7.5/3 +/-25/40 1.0 2.0 3000//2 - FT10M15B3 10.7 +/-7.5/3 +/-27/40 1.5 2.5 2-3000 - FT10M20B 10.7 +/-10/3 +/-34/40 2.0 2.5 2-3000 - FT10M30B 10.7 +/-15/3 +/-50/40 1.0 2.5 5500//-1 -

9 UM-1/UM-5 MCF-2 Nominal Frequency: 21.4Mhz, 21.7Mhz, 23.050Mhz, 21.6Mhz, 30.875Mhz, 45.00Mhz; Operating Temperature Range: -20C~+70C Poles: 2Poles, 4Poles; Mode of Oscillation: Fundamental & 3th Overtone Detail parameters information, including Pass Band Width, Stop Band Width, Ripple, Insertion Loss and Terminal Impedance, please refer to our catalogues or online PDF files.

10 Monolithic Crystal Filter Nominal Frequency: 21.4Mhz, 10.7Mhz, Operating Temperature Range: -20C~+70C Poles: 4Poles, 6Poles, 8Poles, 10Poles; Package Type: S-1(11.0x8.5x11.5mm), S-2(13.4x8.5x11.5mm), L- 1(15.0x12.0x15.0mm),L-2(18.5x12.0x15.0mm), L-3(23.0x12.0x15.0mm), L-4(12.0x9.5x16.5mm); Detail parameters information, including Pass Band Width, Stop Band Width, Ripple, Insertion Loss and Terminal Impedance, please refer to our catalogues or online PDF files.

11 14Pin/8Pin Clock Oscillator Frequency Tolerance: +/-25ppm +/-50ppm, +/-100ppm; Operating Temperature Range: 0C~+70C, -20C~+70C, -40C~+85C; Input Voltage: 5.0+/-0.5V, 3.3+/- 0.3V Output Mode TTL HCMOS TTL/HCMOS Freq. Range 32Khz~155Mhz 32Khz~80Mhz 32Khz~155Mhz Input Current 30,40,60mA 20mA/40mA 20mA/40mA Rate 5.0+/-10%(1.4V) 5.0+/-10%(1/2V) 5.0+/-10%(1.2V) Rise/Fall T 10~15nS 6~10nS 6~10nS - Output 1~10TTL CL=15pf CL=15pf or 1~ Resistance 10LSTTL - H Potentiometer 2.4V 4.5V( 90%V )min 4.5V( 90%V )min Lower 0.4V( 0.5~31.99Mhz ) 0.5V( 10%V )max 0.5V( 10%V )max Potentiometer 0.5V( 32~140Mhz ) max -

12 Clock Oscillator 7x5mmSMD Frequency Range: 1.00Mhz~125.0Mhz Frequency Stability: +/-25ppm to +/-50ppm +/-100ppm Operating Temperature Range: 0C~+70C, -20C~+70C, -40C~+85C Storage Temperature: -40C ~ +85C Input Voltage 5Vdc+/-0.5V 3.3Cdc+/-0.3V Start Up Time 15nS max(1.0~9.9Mhz) 10nS max(10.0~125.0Mhz) Rise&Fall Time 10nS max(1~9.99Mhz) 5nS max(10.0~125.0Mhz) Fan out 1TTL~10TTL or 15pf~50pf Aging +/-5ppm/Y max

13 Ceramic Resonator/Filter/Trap/Discriminator Ceramic Resonator: ZTA/ZTT Serials, CRB Serials, CRB 456F/ 503F/480E Serials,ZTACC_MG, ZTTCC_MG,ZTACS/CV_MT/MX ZTTCS/CV_MT/MX, ZTU Serials; Ceramic Filter: SFU455A, LT10.7Serials, LT/LTH Serials, LT455_W, LT450_W, LT455_U, LT450_U, LTM455_W, LTM450_W, LTM455_U, LTM450_U, Ceramic Discriminator: CDB455C3,CDB455C7, CDB455C10, CDB455C34, CDBM455C16, CDBM455C3, CDBM455C7, CDBM455C18, CDBM455C29, CDBM455C28, CDBM455C32; JT4.5MD, JT5.5~6.5MD, JT4.5MC, JT5.5~6.5MC, JT10.7MG; Ceramic Trap: XT4.5MB, XT5.5~6.5MB, XT3.58MJ, XT4.43MJ;

14 SAW Filter/Resonator in TO-39 & F-11 Package SAW Resonator/Filter can be widely used in: 1.Remote Control Products; 2. Communication Products; 3.CATV Systems; 4. FM Broadcast Serials & TV Set; 5. Security Systems; 6. GPS. GPRS Products and so on. Frequency Range: 36Mhz~1000Mhz; Description: One- port SAW Resonator; Two- port SAW Resonator; SAW Filter with 3 dB- Band-Width Serials

15 SMD SAW Filter&Resonator SAW Filter/Resonator SMD5x5mm SAW Filter/Resonator SMD5x3.5mm SAW Filter/Resonator SMD3.8x3.8mm SAW Filter/Resonator SMD3x3mm

Download ppt "HC49U/HC49T Frequency Range: 1.8Mhz~100Mhz Load Capacitance: 8pf~35pf, serials are available Frequency Tolerance: +/-5ppm to +/-50ppm are available, +/-30ppm."

Similar presentations

Clock distributions (v.9a)1 CENG3480_B1 Digital System Clock Reference: Chapter11 of High speed digital design, by Johnson and Graham.

Clock distributions (v.9a)1 CENG3480_B1 Digital System Clock Reference: Chapter11 of High speed digital design, by Johnson and Graham.
Impedance Transformation. Topics Quality Factor Series to parallel conversion Low-pass RC High-pass RL Bandpass Loaded Q Impedance Transformation Coupled.

Impedance Transformation. Topics Quality Factor Series to parallel conversion Low-pass RC High-pass RL Bandpass Loaded Q Impedance Transformation Coupled.
The L-Network L-networks are used to match the output impedance of one circuit to the input of another. Rsource < Rload, 1< Q < 5 Rsource > Rload, 1

The L-Network L-networks are used to match the output impedance of one circuit to the input of another. Rsource < Rload, 1< Q < 5 Rsource > Rload, 1
Impedance Matching (2). Outline Three Element Matching – Motivation – Pi Network – T Network Low Q or Wideband Matching Network Impedance Matching on.

Impedance Matching (2). Outline Three Element Matching – Motivation – Pi Network – T Network Low Q or Wideband Matching Network Impedance Matching on.
EKT 441 MICROWAVE COMMUNICATIONS

EKT 441 MICROWAVE COMMUNICATIONS
Ph: +612 9482 1944 Fx: +612 9482 1309 75ohm Components.

Ph: Fx: ohm Components.
Sensors Interfacing.

Sensors Interfacing.
COMMUNICATION SYSTEM EEEB453 Chapter 3 (III) ANGLE MODULATION

COMMUNICATION SYSTEM EEEB453 Chapter 3 (III) ANGLE MODULATION

Principles & Applications Communications Receivers

Principles & Applications Communications Receivers
Switching Power Supply Component Selection

Switching Power Supply Component Selection
RF Overview RF and microwave engineering has innumerable applications, from radar (e.g. for air traffic control and meteorology) through electro-heat.

RF Overview RF and microwave engineering has innumerable applications, from radar (e.g. for air traffic control and meteorology) through electro-heat.
Frequency Stability FCC standards for FM Broadcast (p 337) Allocation:88.0 – 108.0 Mhz Channel Spacing/Width:200 khz Carrier Stabilility:+ 2 khz = 20 ppm.

Frequency Stability FCC standards for FM Broadcast (p 337) Allocation:88.0 – Mhz Channel Spacing/Width:200 khz Carrier Stabilility:+ 2 khz = 20 ppm.
1 SmartRF CC400 / CC900 Single Chip High Performance RF Transceivers Peder Martin Evjen, M.Sc.E.E Field Application Engineer.

1 SmartRF CC400 / CC900 Single Chip High Performance RF Transceivers Peder Martin Evjen, M.Sc.E.E Field Application Engineer.
Tel 800-234-7858 Fax 415-453-9956 www.BerkeleyNucleonics.com Introducing a 45 Volt Output Module with Faster Risetimes for the Model 575 Series Digital.

Tel Fax Introducing a 45 Volt Output Module with Faster Risetimes for the Model 575 Series Digital.
Transmitters and Receivers Dr Costas Constantinou School of Electronic, Electrical & Computer Engineering University of Birmingham W: www.eee.bham.ac.uk/ConstantinouCC/

Transmitters and Receivers Dr Costas Constantinou School of Electronic, Electrical & Computer Engineering University of Birmingham W:
EEE 194RF_ L121 ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 12.

EEE 194RF_ L121 ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 12.
LECTURE 4. HIGH-EFFICIENCY POWER AMPLIFIER DESIGN

LECTURE 4. HIGH-EFFICIENCY POWER AMPLIFIER DESIGN
Linear Regulator Fundamentals 2.1 Types of Linear Regulators.

Linear Regulator Fundamentals 2.1 Types of Linear Regulators.
Electrical System Nov. 15, 2010 Monte Frandsen. Key Electronics Design Goals and Constraints Minimal change between ground and airborne observations Signals.

Electrical System Nov. 15, 2010 Monte Frandsen. Key Electronics Design Goals and Constraints Minimal change between ground and airborne observations Signals.

Similar presentations

Ads by Google