1. World Sales Meeting Application
Wind Turbine Preservation

2. Application
Customer manufacturers wind turbines that are shipped domestically on flat beds to areas experiencing high humidity & road salt.

4. Problem
Parts were being shipped on flatbed trucks and could potentially sit for numerous months at site until install
Parts were experiencing severe corrosion when finally unwrapped at customer site
No UV protection with current film

5. Previous Process
Customer was using 40ft wide sheets of 7mil non vci shrink film
Customer was doing 3 separate wraps totaling 21mil

6. Cortec Solution Phase 1
Single wrap of Cortec Milcorr 10mil shrink film

7. Cost Savings/Benefits
66% Labor Savings!

8. Cortec Solution Phase 2 VPCI 111 emitters VPCI 391 water based rp
Interior of power distribution panels
Interior of Magnetek converters
Interior of tower converter doors
VPCI 391 water based rp
Coat exterior surface of power distribution panel
Coat exterior surface of Xantrex & Magnetek converters
Coat ID & OD of tower base assembly
Coat flange face of tower lower & upper mid
Coat exposed machined surfaces of gear boxes
Coat flanges of blade assembly

9. Cortec Solution Phase 2 (cont’d)
VPCI 322 oil additive
Fog interior of gearbox assembly
VPCI 337 “fog in” water based rp
Fog in hardware container box
Fog in hub assembly
For existing products with Dr Shrink cut hole in film and fog 337
VPCI Super Penetrant
Coat exposed threads of machine base assembly
Spray studs of blade assembly
VPCI 418LM parts wash
Clean all parts prior to applying Cortec products

10. Which Has Lead To Moving upstream selling to their suppliers
Selling to their competition