1. High Speed NCM (HS-NCM)

2. HS-NCM Overview Supports 200 nodes
No limitations when using a DVC to page over the network
Two node addresses per HS-NCM
Compatible only with Onyx series panels (8th and 9th edition)
8th edition products can only be used in retrofit applications

3. HS-NCM Overview
NFN on IP based VDSL Network (Very High Data Rate Subscriber Line)
Does not use ARCnet protocol
The HS-NCM is NOT compatible with the standard NCM Noti-Fire-Net Network.
Supports NUP (Notifier Universal Protocol)
Can be configured as a network repeater by setting address to 0
Installs in same single module bay as NCM

4. HS-NCM Overview Each HS-NCM has: Two NUP Ports Two USB Connections
ONYX FACP, NCA-2, DVC, Veri-Fire Tools and/or Gateway
Two USB Connections
One Host Standard A and One On-The-Go Mini AB
Veri-Fire Tools
External Power Connection (Remote Repeater)
Ethernet Port for Future Diagnostics

5. HS-NCM Part Numbers High Speed NCM (HS-NCM) HS-NCM-MF Multimode Fiber
HS-NCM-MFSF Multimode/Singlemode Fiber
HS-NCM-SF Singlemode Fiber
HS-NCM-W Wire
HS-NCM-WMF Wire/Multimode Fiber
HS-NCM-WSF Wire/Singlemode Fiber
HS-GW-EM Embedded Gateways
BACNET-GW-3
NWS-3
NFN-GW-EM-3

6. HS-NCM-W VDSL Data Rate 12Mb (Variable 3Mb-24Mb Future)
Supports twisted pair wire
18AWG- 14AWG
Maximum Distance 3,000 ft.
NFPA Style 4 (Class B) or Style 7 (Class A)
Data is regenerated at each node

7. HS-NCM-W Channel A Connection Channel B Connection USB Connections
Ground Fault Detection Switches S1 = CH A S2 = CH B
NUP Ports
External Power Connection

8. HS-NCM-W Wire Requirements
MUST be Twisted Pair
Prefer a Data Grade Cable (Belden)
Non-Shielded Wire for High Speed Communications
200 Nodes at 3,000’
Belden 5320UJ 18/2 FPL
Belden 5320UM 18/2 FPLR
Genesis /2 FPL
Genesis /2 FPLP
Genesis /2 FPLR
Genesis /2 FPLP

9. HS-NCM-W Wire Requirements
200 Nodes at 2,000’
Genesis /2 FPLR
200 Nodes at 1,000’
Genesis /2 FPLR
Genesis /2 FPLR
Belden 5220UM 16/2 FPLR
200 Nodes at <1,000’
Genesis /2 FPLP
This cable did not pass the test for 200 nodes at distances even less than 1,000’ and therefore should not be used as a network segment cable

10. HS-NCM-MF (Multi-Mode Fiber)
Data Rate of 100Mb
Supports Fiber Optic Cable
62.5/125 10dB Limit
50.0/ dB Limit
NFPA Style 4 (Class B) or Style 7 (Class A)
Data is regenerated at each node
Fiber Connectors: LC Style

11. HS-NCM-SF (Single-Mode Fiber)
Data Rate of 100Mb
Supports Fiber Optic Cable
9/125 30dB Limit
NFPA Style 4 (Class B) or Style 7 (Class A)
Data is regenerated at each node
Fiber Connectors: LC Style

12. HS-NCM-SF (Single-Mode Fiber)
NO CONVERTERS REQUIRED !!!
Previous singlemode fiber segment required two NCM-F, two singlemode converters and mounting kit.

13. HS-NCM Hybrids (Wire to Fiber)
HS-NCM-WSF
HS-NCM-WMF
Multi-Mode fiber to Single-Mode fiber converter not shown

14. ONYXWorks™
Intel 2.0 GHz Pentium IV microprocessor
1 GB RAM
80 GB hard drive
1.44 MB floppy drive
24/10/40X CD-RW drive
19” Flatscreen LCD monitor
Microsoft Windows XP

15. HS-NCS High Speed ONYXWorks
ONYXWORKS-HNMF (High Speed NFN Multi-mode Fiber)
ONYXWORKS-HNSF
ONYXWORKS-HNW
High Speed card for ONYXWorks Add-On (Upgrade current ONYXWorks)
NFN-GW-PC-HNMF
NFN-GW-PC-HNSF
NFN-GW-PC-HNW

16. HS-NCS Cards for ONYXWorks NOT compatible with the NCS Workstation
HS-NCS-MF
HS-NCS-SF
NOT compatible with the NCS Workstation
For ONYXWorks only
HS-NCS-W

17. HS-NCM Applications 100 DVC,NCA-2,Gateway or another FACP NUP NUP USB
2 Node
Addresses
USB
NFN
NFN
Veri-Fire Tools
100
HS-NCM
HS-NCM

18. HS-NCM Applications 200 Veri-Fire Tools NUP (either/or connection) NUP
USB
HS-NCM
1 Node
Address
USB
NFN
NFN
200
Veri-Fire Tools
HS-NCM
HS-NCM

19. HS-NCM USB Limitations
USB connection for the HS-NCM is NOT supported on the fire panels until the following releases:
NFS Release 14.1
NFS2-640/NFS-320 Release 15.0
USB Connections not supported on NFS-640 or NFS-3030
Do not use the USB Mini On-The-Go connection on the fire panel

20. Any Questions ?