1. Department of Mechanical and Aerospace Engineering, The Ohio State University ME 4900 Intro. to Design Studies ME 4902 Motor Sports Competitions ME 4901 General Projects ME 4905 Assistive Devices ME 490X Special Projects AFRL Capstone Sequence A Overview

2. Department of Mechanical and Aerospace Engineering, The Ohio State University 4900: ME Capstone Design 7 week introduction to design. Emphasize the commonality of a general approach. Complete a mini project so they have seen the entire design process before starting their main project sequence. Gateway for all students taking 4900 sequence. Fundamentals of engineering, design process, technical and professional skills ABET-EAC “small letter” skills Want to engage students so focus on design exercises in recitations.

3. Department of Mechanical and Aerospace Engineering, The Ohio State University 4900 Project Tracks Selection: 4901.01/02 – General Projects 4902.01/02 – Student Motorsports Competitions 4905.01/02 – Assistive Devices Projects

4. Department of Mechanical and Aerospace Engineering, The Ohio State University 4 ME 4901: General Design Air Engine Project

5. Department of Mechanical and Aerospace Engineering, The Ohio State University Why Create a Course Around the Air Engine? Great vehicle for teaching capstone design because it is one of the broadest multi-faceted project. Focuses on all of the sub-disciplines within mechanical engineering including: Mechanical Structures and Materials Manufacturing and Assembly Statics and Dynamics Computer Programming and Control Friction, Wear, Tribology, Surface Finish Thermal Fluid Sciences Acoustics

6. Department of Mechanical and Aerospace Engineering, The Ohio State University Other Educational Reasons: Electronics and Digital Control Students learn the application of electronics, digital control, and programming skills in the solution of a practical engineering problem. Digilent chipKIt Uno32 Microprocessor Modern engineered products, from washing machines to aircraft, are creative combinations of electronics, control, and mechanical systems. Our students will benefit from a through experience. Currently our students only take a circuits class. We have gotten very positive feedback on including programming and electronics.

7. Department of Mechanical and Aerospace Engineering, The Ohio State University Other Educational Reasons: Design for Manufacture and Assembly Emphasize DFMA (for Manufacture and Assembly), Near-Net Shaped Manufacture, Mass-Production, Alignment and Tolerance Concerns. Students are given a background in manufacturing with an emphasis on machining. Students have limited experience in low cost production methods. This class emphasizing creating design that are low cost yet high value. In this example commercially available projects are modified. Low-cost Student Engine

8. Department of Mechanical and Aerospace Engineering, The Ohio State University Other Educational Reasons: Incremental Testing and Analysis In the commercial world, there is a strong emphasis on physical testing for verification. Students will follow a structured progression of improving the design and continued testing. Students will: Run their engine for 2 hours to verify reliability Test their valve actuation program on a one-cylinder test engine. Use engine dynamometers to fine-tune engine power. One Cylinder Test Engine