Presentation is loading. Please wait.

Presentation is loading. Please wait.

Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 Introduction to Optical.

Similar presentations


Presentation on theme: "Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 Introduction to Optical."— Presentation transcript:

1 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 Introduction to Optical Character Recognition (OCR)

2 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 Summary  Overview of OCR  System Requirements  Advantages and Disadvantages  Operation and Management  Questionnaire Design and Preparation  OCR Field Operation  OCR Country Outlook

3 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 OCR (Optical Character Recognition)  Function & Features of OCR/ICR  ICR, OCR and OMR Compared Optical Mark Reader (OMR) OCR/ ICR

4 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 OCR (Optical Character Recognition)  Also referred to as Optical Character Reader  “…a system that provides a full alphanumeric recognition of printed or handwritten characters at electronic speed by simply scanning the form.” (UNESCAP, Pop- IT project, 1997-2001)  Intelligent Character Recognition (ICR) is used to describe the process of interpreting image data, in particular alphanumeric text.  Sometimes OCR is known as ICR

5 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 Functions & Features of OCR  Forms can be scanned through a scanner and then the recognition engine of the OCR system interpret the images and turn images of handwritten or printed characters into ASCII data (machine-readable characters).  The technology provides a complete form processing and documents capture solution.  Allows an open, scaleable and workflow.  Includes forms definition, scanning, image  pre-processing, and recognition capabilities.

6 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 ICR,OCR and OMR Differences  ICR and OCR are recognition engines used with imaging;  OMR is a data collection technology that does not require a recognition engine.  OMR cannot recognize hand-printed or machine-printed characters.

7 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 Optical Mark Reader (OMR)  Forms An OMR works with a specialized document and contains timing tracks along one edge of the form to indicate scanner where to read for marks which look like black boxes on the top or bottom of a form. The cut of the form is very precise and the bubbles on a form must be located in the same location on every form.  Storage With OMR, the image of a document is not scanned and stored.  Accuracy OMR is simpler than OCR. designed properly, OMR has more accuracy than OCR.

8 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 OCR/ ICR  Forms OCR/ ICR is more flexible since no timing tracks or block like form IDs required. The image can float on a page. ICR/ OCR technology uses registration mark on the four- corners of a document, in the recognition of an image. Respondents place one character per box on this form. The use of drop color reduces the size of the scanner’s output and enhances the accuracy.  Storage/ retrieval If the document needs to be electronically stored and maintained, then OCR/ ICR is needed. OCR/ICR technologies, images can be scanned, indexed, and written to optical media.

9 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 OMR-OCR/ICR Compared

10 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 System Requirements  Minimum capacity PC Requirements: Processor: Pentium 200 MHz RAM: 32 MB Disk: 4 GB Form modules are designed to operate in a batch processing; Run under LAN and PC based platforms and take full advantage of the graphical user interface and 32 bit processing power available with most Windows versions.  Software:  OCR with ICR capability software  Questionnaire Design Software

11 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 System Requirements (cont.)  Scanner OCR scanners with minimum capacity: Duplex scanning Speed: 60 sheets/ min Automatic Document Feeder (ADF): Scanning can take a significant amount, and the system lets user scan up without doing the OCR.

12 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 Advantages and Disadvantages  Advantages of Using Images Rather Than Paper Quicker processing; no moving or storage of questionnaires near operators Savings in costs and efficiencies by not having the paper questionnaires Scanning and recognition allowed efficient management and planning for the rest of the processing workload Reduced long term storage requirements, questionnaires could be destroyed after the initial scanning, recognition and repair Quick retrieval for editing and reprocessing Minimizes errors associated with physical handling of the questionnaires

13 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 Advantages and Disadvantages  Disadvantages of Using Images Rather Than Paper Accuracy  While OCR technology can be effective in converting handwritten or typed characters, it does not give as high accuracy as of OMR for reading data, where users are actually marking forms  Additional workload to data collectors OCR has severe limitations when it comes to human handwriting  Characters must be hand-printed with separate characters in boxes

14 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 Operation and Management  OCR Process Stages Document Scanning process  Scanning speed will be determined by the quality of the scanner machines, the size of non-drop out color. Paper quality, cleanness, weights. Recognizing process  The recognizing process is to interpret images. The right memory (dictionary) and the configuration threshold will determine the accuracy of interpretation of the ICR. Verifying Process  To compare the value of the interpreted image with the real image of the form.  Processing can be in geographic order or in random order.

15 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 Operation and Management (cont.)  Image Manipulation Electronic questionnaires can be sent to specialist operators then back to the original operator if necessary Same questionnaire can be worked on simultaneously by two or more persons Electronic questionnaires are readily available for post census analysis (easier access to questionnaires) Parts of various questionnaires on screen at once for inter record editing Able to view the relevant field book entry on screen in conjunction with questionnaires which is helpful for coding and editing

16 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 Operation and Management (cont.)  Coding Assistance The problems are simpler for the operator to identify Can use images of questions that will not be captured (scanned but not recognized) to help the coding process. ex, light pencil. Operator can magnify images to read characters not discernible to the naked eye Appropriate software ensures that the data is validated as the forms are read. Checks to ensure selections on a form are filled in. Possible to distinguish between intended marks and marks that have been erased.

17 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 Operation and Management (cont.)  OMR Scanner Speed  Factors Skew: Each document is moved from an automatic feeder into ascanner and angle of skew is sometimes introduced. De-skew: Analyze the image bit- map, calculates and returns the angle of skew up to +/-25. Example. De-skew often refer to %, which is the pixel shift. 10% is a 20-pixel shift in a line of 200 pixels or one tenth of an inch in an inch long line.

18 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 Operation and Management (cont.)  Landscape Detection and Auto Rotation: landscape detection will automatically detect and rotate appropriate images 90 degrees.  White Page Detection: Normally, a double-sided scanner creates two images per scanners page. However, if the back or front page is blank, there is no need to store this image.  White page detection Allows the user to avoid storing blank page.

19 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 Operation and Management (cont.)  Other Factors Automatic Image Registration De-Speckle and Shade Removal Character Enhancer Cost Savings Automatic processes to improve recognition rates Voting techniques, Multiple engines, Learning

20 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 Questionnaire Design and Preparation  Drop Out Color Usually red- the color facility in OCR system that allows the system to pick up only the meaningful information from an OCR form. The system doesn't need to know the values including tick boxes written in the drop out color. The OCR system only needs to see the black parts, and compares them to specifications to see parts that are filled or written.  Characters or Marks Considering the speed of the data capture process and to reduce rates, it is advisable to use marks or “ticks” as much as possible

21 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 Questionnaire Design and Preparation (cont.)  How to Obtain Good Results of Scanning Select adequate paper quality; Reliable printing press. Appropriate ink, considering drop out color, for the questionnaires paper heavier than 80 grams per square meter can help avoid paper crashes or over read the other side of a single page.  Form Design Advise Number items to be included in a form; Design size of boxes for each character answer carefully. Define drop out color properly; use registration marks. Pre-print the codes near the place where the box for ticks are located Maintain consistent pattern in which the information to be collected will be located. Do not disturb the visibility of the ticks and marks with titles, labels or instructions. Avoid putting "answers" of one field to another page of the questions; Avoid using open ended questions

22 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 OCR Field Operation  Training for Collection and Processing Staff Basic software, scanner operations, including installation and troubleshooting. Applications with emphasis on the development of custom applications including: configuring nonstandard forms Pre-marking of forms, use of overprinting customize forms Processing of surveys Crating custom outputs file formats

23 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 OCR Field Operation (cont.)  Reasons of Error- Reading of OCR  Bad condition of the form because of dirt, folded, crumple, etc.  Forms fed into OCR scanner are not straight (at an angle); Incompletely filled  Reduce Error-Reading of OCR  Checking the questionnaires for completeness and consistencies; Preparation of own memory (dictionary); Defining permissible margins of OCR reading errors  Particular Care in Writing Numbers or Alphabetic  One box contains only one character; Characters should not extend outside designated boxes; Unnecessary lines of characters such as points, decorative strokes, hooks, etc. are prohibited. Strokes should not be ended with flourishes or extensions.  All lines should be connected without breaks; All lines or dots should be pressed with the same pressure.  Value Checking Steps: Verify that the information captured by OMR is the same with the questionnaire  Control for Blank: If the information is blank, what type of control must be taken.  Control steps should be taken if the information image is partial or no information to assure the quality of generated files.  Missing Questionnaire; Make sure that the entire questionnaires are scanned  completely, no missing and no duplication as well.  Therefore control procedures including to produce control tables to compare with manual work.

24 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 OCR Country Outlook  Countries using optical mark recognition (Greece)  Countries using optical character recognition (Croatia- in use for the next census round) (Japan-out-sources entire process and in use for the next census round)  Countries using both Belgium  Countries planning to use OCR Tajikistan (Tonga) looking to introduce and use OCR for our next Census

25 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 OCR Country Outlook  Common device/scanner and software used by NSOs (Croatia) KODAK DS3520 bitonal scanners, IBM IFP (intelligent Forms Processing) (Greece) OMR- devices/scanners were ‘’axm 990/995’’ with FORM/ AXF/ ADELE+ software (New Zealand) Kodak scanners i830 and i7620 - scanning and raw data capture process (recognition aspect) were outsourced.- For the next census -end scanning and data capture process will more than likely be outsourced but it really is a variation to a current supplier agreement. (Belgium) AGFA (high resolution) scanner

26 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 OCR in Use  Editing method used for the census (Japan) cold-deck method, hot-deck method, etc. (Croatia) in house developed – logical checking and automatic and manual correcting (Greece) via PC- editor (officer of N.S.S.G.) confirms or rejects a non-accurate value or inputs a missing one. (New Zealand) mixture of micro and macro editing practices. Individual responses may have range or validity edits, inter- field edits and also inter-form edits (within a household). Macro editing is particularly used during the data evaluation process and data may be reprocessed as a result of this

27 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 OCR Country Outlook  Common commercial or free software used in OCR (Croatia) Use ACTR (automated coding by text recognition) for coding -software developed by Statistics Canada. (Greece) Commercial software, after an open bidding, according to the budgetary plan of the population census (New Zealand) IBM Intelligent Forms Processing (IFP) system through an established user agreement. (Belgium) IRIS (Image Recognition Integrated Systems)

28 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 OCR Country Outlook Concerns/issues with the use of optical character recognition for data capture for the census? (Japan) Speed of data capture and recognition, recognition accuracy of Japanese characters, etc. (Greece) OMR -related to the optical recognition of numbers, the rapidity of optical recognition itself and the electronic storage of the questionnaires. (Tajikistan) Getting equipment and training. (Samoa) Not enough financial support and technical human resources.

29 Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 THANK YOU!


Download ppt "Workshop on international standards, contemporary technologies and regional cooperation Noumea, New Caledonia, 4 – 8 February 2008 Introduction to Optical."

Similar presentations


Ads by Google