1. Writing Clear and Concise Non-conformances (NCs)
Presented By
Larry Henderson
BSI Americas, Inc
Mike Gallagher
Lockheed Martin Space Systems Company

2. RMC Aerospace Auditor Workshop
AGENDA
Writing Non-conformances (NC) Analysis.
Parts of a Non Conformance.
Making it clear.
What is the Process Approach?
Accepting NC Responses.

3. Non-conformance Report Writing
AND THE CLIENT SAYS:
I DON’T HAVE A CLUE WHAT YOU ARE SAYING OR WHAT YOU ARE TALKING ABOUT……???
OR PRIME INDUSTRY OVERSIGHT AUDITOR
WHY IS THIS AN NC?
WHAT REQUIREMENT IS VIOLATED?

4. NC Writing Analysis
From analysis of data collected from witness audits, office audits aerospace oversight and other feedback, NC writing has been identified as one of the more significant concerns.
Identified weaknesses were:
The NC as written was “incident specific” and did not address the systematic issue (s).
The NC as written could not be understood by the organization after the audit was completed; and not understandable at later date.
The NC did not identify the actual requirement being offended.
The NC did not identify the supporting objective evidence.
Poor CA and root cause analysis accepted by the auditor.
No indication corrective actions were verified at NC closure.
NOTE: POORLY WRITTEN NCs SUPPORTS “SOFT GRADING” CUSTOMER, OEM, AND IAQG AND AAQG CONCERNS.

5. Writing Process Non-conformances
NCs must be clearly written.
Should address the process/system which is deficient.
Objective evidence gathered should identify which process is deficient.
What is the process?
You must understand the process to verify conformance or non-conformance.
Is the non-conformance identified, systemic to the process?

6. Process Approach The process approach emphasizes the importance of:
Understanding and meeting requirements.
Looking at processes in terms of added value.
Obtaining results of process performance.
Continual improvement of processes via the documenting of NCs.

7. AS9100 is based on a process approach to quality management
A process is a set of interrelated or interacting activities that uses resources to transform inputs into outputs
The process approach systematically identifies and manages the linkage, combination, and interaction of a system of processes within an organization
AS9100 is based on a process approach to quality management

8. Process Approach Process Approach PROCESS PROCEDURE Input Output
(Specified way to carry out an activity or process – may be documented or not)
PROCESS
(set of interrelated or
interacting activities)
Input
Output
Resources
Product
Monitoring & Measurement Opportunities
(Before, During, and After the Process)

9. Process Approach Your Process
The Plan-Do-Check-Act (PDCA) methodology applies to all processes
Activities
Controls
Documentation
Resources
Objectives
Deploy & conform with plan
PLAN DO
Your Process
Continual Improvement
ACT
CHECK
Analyze/review
Decide/change
Improve effectiveness
Measure & monitor for conformity & effectiveness

10. Process Audit Scope
Specific to the function, area, requirement, system or process being audited.
Processes audited should remain constant.
Follow audit trails to the end to obtain good objective evidence.
Document objective evidence to support NC identified.

11. HOW DEEP SHOULD YOU GO!----INTO THE PROCESS
Evaluate the process thoroughly.
Avoid “tunnel vision”.
Ensure objective evidence supports conformance or non-conformance of the process.
Gather enough objective evidence to support your final decision.
Adequate “sampling” of objective evidence.
Repeatability of objective evidence which indicates the process is not working.
indication of consistent process failure.

12. Three Distinct Parts of An NC
An audit NC should have three distinct parts:
A clear statement of the non-conformance.
The requirement, or specific reference to the requirement.
If you cannot identify a requirement, then you cannot raise a non-conformance.
And finally, objective evidence that supports the statement of non-conformance; based on the requirement.

13. Statement of the NC
Should be self-explanatory and related to the process.
Be unambiguous and concise.
Not be a restatement of the audit evidence.
Record the requirement against which the NC was detected.
If possible, write out the exact text of the requirement.
The audit evidence must support the audit finding.
The evidence must be specific to the violated requirement.
Evidence must be traceable to the NC.

14. Examples of POOR NC Statements
Example: Two pieces of calibrated equipment was past due calibration.
(THIS GIVES ONLY A BRIEF INDICATION OF THE PROBLEM)
AND ALSO
The statement does not give the auditee any indication that there is a system/process failure.
It appears as a single instance.
It does not identify the actual requirement being offended-actually, it incorrectly states the requirement.
As written, the auditee could easily assume the NC was a single incident and take action ONLY related to the two pieces of calibrated equipment.

15. Making it Clear
Changing the structure and the way the NC is written can assist in getting the auditee to address the “root cause” of why the calibrated equipment is past due calibration.
The NC must highlight the issue that there is a system/process failure vs a single incident failure.
Thus, the corrective action and root cause should be focused towards system/process failure, not the observed incident.

16. NC Statement “TIPS” TIPS:
The statement of NC should be as generic as possible to help direct the auditee to the system’s issue… instead of the specific incident.
Keep the “specific details” in the objective evidence area, if at all possible.
The NC statement should include enough details so that the auditee can respond to exactly what the auditor found…….even years later.

17. Examples of Poorly Written NCs
Non-conformance states:
A required block torque test was not being performed. (Classified as “Minor” yet a test not performed would be detrimental to the integrity of the product.)
No preventative action records exist. (This would equate to an absence of a quality management system element.)
Neither NC statement tells the client what went wrong...what process is broken?

18. Writing of NC Statements
Non-conformance:  (Clearly define and document the systemic failure within the non-conformance.    You want ensure the client understands the exact nature of the non-conformance.  Too many words could mis-lead the client.)
The system for the control of the process for product design failed to ensure authorization or approval was given prior to proceeding from Stage 2 to Stage 3 of the product design.
Objective Evidence: (Quote appropriate aerospace standard clause, work instruction, procedure or process requirement)
The Design/Engineering review record did not indicate authorization was given to proceed to Stage 3 of the product design.

19. Writing of NC Statements
Stated Requirement: (What objective evidence is/was used to indicate a non-conformance existed?  What record, document, procedure was used to verify existence of a non-conformance)
AS9100, Clause 7.3.4c, at suitable stages, systematic reviews of design and development shall be performed in accordance with planned arrangement; authorization is required for progression to the next design stage.

20. Accepting Closure of CAR Responses
The auditee’s corrective action response should cover three areas, as a minimum:
Containment of the current situation and identified systemic failure.
Action to control or mitigate a problem; could includes correction, corrective action.
Root cause analysis as to why the system failed.
Finally, a systemic corrective action to prevent a recurrence of a failure in the system/process (could be preventive action may apply here.)

21. Corrective Action Acceptance/Closure
Does CA response address system process NC?
Is Root Cause adequate?
You must know and understand the process to accept the CA and root cause.
Does client’s response ensure no re-occurrence?

22. Scenario One
-Auditor John Hancock is reviewing control of non-conforming material at The Great Widget Company. The Great Widget Company has a separate locked room where all non-conforming material is stored until the material is dispositioned.
-During John’s review of the room he notices that material dispositioned as scrap is placed in large metal containers and the containers are then also stored in the locked room. When John asks what happens with the containers, he is told that the local scrap dealer takes them away.
Should John:
Show that The Great Widget Company is conforming?
Ask to see the customer approval of the current scrap procedure?
Write an NC?

23. Scenario One The Correct answer is C: Write an NC.
John should write an NC because AS9100 Section 8.3 requires that scrap material be segregated until physically rendered unusable.
Currently The Great Widget Company segregates their scrap but when it leaves their facility it has not been rendered unusable.

24. Scenario Two
During an audit, you read the Management Review procedure. It states they have defined measurable objectives for productivity, Customer satisfaction, and quality. When you ask to see the measures looked at during a management review meeting, the Plant Manager hands you a 3 inch pile of papers. As you go through the information, you notice there are plenty of charts, graphs, and pivot tables. Seems like this place measures everything they possible can, but there are no goals listed or explanations for trends going in the wrong direction.
The Plant Manager understands each chart and is clearly involved, but when asked how he uses them to drive improvement, or how he knows if he is meeting his goals, he has no answer.

25. Scenario Two You Should:
A. Do nothing, the thoroughness of the management review is evidence that it is acceptable. Improvement, although desirable, is not required.
B. Write an NCR because there has been no improvement and therefore the management review is ineffective.
C. Write an NCR, as there is no evidence of defined measurable quality objectives as stated in the procedure.

26. Scenario Two The Correct answer is C: Write an NC.
AS9100 Section states, in part “that top management shall include assessing opportunities for improvement of its effectiveness of it’s QMS.”
The plant’s procedure stated they will have defined measurable objectives for quality and none were found during this review.

27. Scenario Three
While auditing the purchasing department of Hector Aircraft Components, you note that the purchasing procedure, HAC 123, does not address positive recall per AS9100 section paragraph two, and the company’s process does not address periodically validating test reports for raw material in accordance with section paragraph three.
The QM, Hector, immediately corrects the master purchasing procedure and saves the revised form in the company’s electronic media. He demonstrates that the master purchasing document, HAC Admin Form 01 now shows the requirement to validate test reports, and that the procedure shows the positive recall requirement.
You should:
Write an NC and accept it on site
Write an NC and leave it open
Do not write an NC because the issue has been resolved
Follow up to see if the company actually uses the new procedure

28. Scenario Three You should: Write an NC and accept it on site
Write an NC and leave it open
Do not write an NC because the issue has been resolved
Follow up to see if the company actually uses the new procedure

29. Scenario Three The Correct answer is B: Write an NC.
When a major component of the quality system is missing, it requires an NC.
Base on severity of NC, some NCs cannot be closed on site

30. ????Questions????