1. JOINT STOCK COMPANY «DRILLING SYSTEMS» well construction
2011

2. JSC, Drilling Systems has been established in the year 2005
JSC, Drilling Systems has been established in the year As per today company numbers is around 600 employees.
JSC, Drilling Systems operates in oil&gas well construction field and performs all kinds of drilling activity for all oil&gas companies in Russia.
Main activity:
Construction of exploratory, development, production wells, including horizontal and flat wells;
Recovery of inactive wells by kickoff and drilling of sideholes method;
Rendering of service in well construction:
IPM
supervising
backfill servicing
drilling mud servicing
rig building
The Company is organized in accordance with international standards of management, registered in IADC. It has united the best specialists, that had drilled hundreds of wells in remote areas with different and complex climatic and geological conditions.

3. Maximum hook load capacity, t
Drilling fleet of the Company consists of domestic and foreign АPI-certified equipment.
Rig type
Quantity
Maximum hook load capacity, t
Capacity, HP
Depth of drilling, m.
Drive type
Design
Drill pump
ZJ70DBS* 1
450
2700
7000
diesel
block
F-1600\2
ZJ50DBS 3
315
1900
5000
БУ 3000 ЭУК
200
700
3000
electric
echelon
УНБ-600\2
БУ TZJ30 2
180
1000
Block, on trailer
8Т650-01\2
БУ TZJ20 4
125
650
2000
БУ 1600/100 ЭУ
100
670
1600
УНБ-600
ZJ70DBS* - in acquisition stage

4. Foreign – made rig’s advantages:
- possibility to operate both from industrial networks and off-line ( the rigs are equipped with high power Caterpillar generating plants);
- up-to-date electronic control ABB, Siemens;
- unit is equipped with top drive TDS 9SA, TDS 11SA (Varco);
- highly reliable disk drawworks with air cooling;
- pumping block includes triplex pumps power 1600 H.P. with AC drive of frequency regulation;
- cleaning system is four staged, Derrick production
The drilling rigs are designed both for drilling of single exploratory wells and development wells in a cluster. The operating temperature range for the drilling rigs is from – 40 up to degrees С. All the foreign-made rigs include the equipment, which allows drilling under API system.

5. ZJ50DBS ZJ70DBS STATIONARY DRILLING RIGS ZJ 50 DBS, ZJ 70 DBS
Nominal drilling depth, m
5000
7000
Maximum hook load capacity, kN
3150
4500
Maximum drill pipe weight, kN
1800
2700
Drill line diameter, mm 35 38
Rig useful height, m 45 41
Working floor height, m 9
Draw work capacity, HP
1900
Rotary table diameter, mm
950
Drill pump capacity, HP\ 2 units
1600

6. MOBILE DRILLING RIGS TZJ 20, TZJ 30 ТZJ20DBS ТZJ30DBS
Nominal drilling depth, m
2000
3000
Maximum hook load capacity, kN
1250
1800
Total capacity of drilling pump, HP.
2х650
Drill line diameter, mm 28 32
Rig useful height, m 36 38
Working floor height, m 6
Draw work capacity, HP
650
1000
Rotary table diameter, mm
560
Swivel
SL 160
SL 225

7. All the specialists of our company are highly skilled and have an experience in oil&gas industry more than 10 years.
Under supervision and command of these specialists more than 2000 wells were drilled in remote areas with seasonal constraints in logistics and extreme temperatures. While drilling process the Company applies for all the spectrum of technologies to operate accident-free. Drilling Systems has a wide experience in realizing of complicated projects in permafrost, extreme temperature conditions. Company uses technology of horizontal drilling, well recovery, sidetracking methods.
The number of drilling crews is drilling rigs, 23 units of backfill techniques are in arsenal of the Company.
Age structure:
57% are younger than 40 y.o.
24% are from 40 tо 50 y.o.
19% are older than 50
Qualification:
- 65% of staff have higher and technical secondary education
- 25% of staff have specialized secondary education

8. Experience of working: oil wells.
1. Exploration drill hole (including abnormally high formation pressure).
Depth – 4500 m.
3. Horizontal well.
Depth m.
Lengths of horizontal part – 600 m.
Well ПО-5 of Nerutinskaya area (Nadym region).
Construction:
426х500 m.
324х1500 m.
245х3675 m.
184х3175–3865 m.
140х4200
Anomaly factor – 1,7
Well № 2047 Romanovskoye oilfield (Noyabrsk region)
Depth (of vertical line)– 2787 m.
Depth (of borehole) – 3770 m.
Lengths of horizontal part– 560 m.
2. Vertical and directional wells (production, injection, water wells). Depth m. Offset –2000 m.
4. Sidehole with horizontal completion.
Depth – 4000 m.
Lengths of horizontal parts m.
Well № 1196 Sugmutskoye oilfield (Noyabrsk region)
Depth (of vertical line) – 2900 m.
Depth (of borehole) – 3850 m.
Offset– 1963 m.
Well № 112 Vostochno-Tarko-Salinskoye oilfield (Tarko-Salynsk region)
Depth (of vertical line) – 2860 m.
Depth (of borehole) – 3538 m.
Lengths of horizontal part – 250 m.

9. Company’s geography: Yamalo-Nenetskyi Autonomous Region
(Надым, Н.-Уренгой, Тарко-Сале, Губкинский, Ноябрьск)
“”RitecNadymneft” (RITEC)
“GazpromDobychaNadym” (Gasprom)
“Techneftinvest”
“Sibneftegaz”
“Noyabrskneftegaz” (Sibneft, Gazpromneft)
Ural Volga Region
(Udmurt Republic, Tatarstan, Ulyanovsk, Samara, Kurgan)
“”Samara-Nafta”
“Ulyanovskneft” (Rusneft)
«Nafta-Ulyanovsk» (Rusneft)
“TatRitecNeft” (RITEC)
“Belcamneft” (Rusneft)
Khanty- Mansyiskyi Autonomous Region
(Kogalym, Nizhnevartovsk, Raduzhnyi, Khanty-Mansyisk, Nyagan)
“NGDU “Ritecneft” (RITEC)
“Negusneft”
Kazakhstan (Atyrau, Actubinsk)
“Kokzhidemunai”
“Potencialoil”
“KazakhOilActobe”
Irkutsk
«Irkutsk oil Company»
«RUSIA-Petroleum»

10. .
Sustainable development for the Company means harmonizing the interests of economic growth and careful attitude to environment.
Oil and gas drilling is inevitably followed with man-caused effect on environment. Degree of pollution depends on application of technology, level of equipment and qualification of personnel. Specialists of Drilling Systems, JSC try to minimize negative effect on environment using advanced drilling technologies, new equipment and cleaning facilities.
low toxic substances of the 4th danger class are used as mud chemicals;
used drilling mud is used again for drilling new wells. In this case 4-stage cleaning with shale shakers, descanters and desilters are used;
under high requirements for environment safety, closed cycle system is used – drilling without mud pits when used drilling mud is cleaned with technology of coagulation and flocculation and passing through centrifuge as well.
Conceptual issues of ecological policy of the company:
- preservation and rational use of natural resources;
- maintenance of ecological safety on all industrial objects of the company
- decrease in emergency situations

11. OCCUPATIONAL HEALTH AND INDUSTRIAL SAFETY
So far “Drilling Systems” has had no one administrative claim and punishment from control authorities for breach of environment protection laws all over Russia! .
OCCUPATIONAL HEALTH AND INDUSTRIAL SAFETY
- Safety in all lines of operational activity is the main target of the enterprise (company). Maximum risk mitigation, prevention of personal injuries and accidents at drilling rigs, close environmental control – are the main activities the management follows to deliver on these targets.
- Industrial Safety and Occupational Health activities are in accordance with the requirements of the Federal Law “On Industrial safety of hazardous production facilities» (Federal Law # 116 of 21 July 1997 , RF Labor Code adopted on 21 December 2001) and other regulatory documents, including API Standards .
- The company has all the required licenses for all lines of activities to be performed
- According to the requirements of these documents all the specialists of DRILLING SYSTEMS have been trained and evaluated in Industrial Safety, the managers have been evaluated by the RF FSETAN Central Commission
- We operate the equipment and facilities certified by quality, insured and registered.
HSE POLICY
JSC “Drilling systems” considers the development of industrial safety system, ensuring healthy and safe work conditions of the personnel as well as mitigation of environmental impact to be one of the priority lines of its activity. It is possible to achieve the set goals under sustainable development of the company, which in many respects can be ensured by the balanced salvation of social and economic problems, environmental protection and natural resources preservation.
In this respect the company’s policy is inseparably linked with the current regulatory structure of the Russian Federation in the field of industrial and environmental safety, as well as with the recommendations of the ISO and OHSAS international standards

12. OUR VALUES:
- We believe that the team spirit, unity – are the basis of our individual and corporate actions.
Just well-coordinated and organized work, common goals, life values, which unite us, lead to the development of the company we are proud of.
- We believe in performance of operations without accidents and incidents
- HSE issues are of great importance to us
- We design and carry out high quality operations
- We understand the demands of our Customers

13. СERTIFICATION

14. СERTIFICATION

15. LABORATORY
Drilling Systems, JSC has own drilling mud laboratory (according with API standards) and backfill laboratory (according to RF State standards).

16. MUD CLEANING EQUIPMENT
Drilling mud cleaner
shaking sieve
centrifuge
(355х1257)
centrifuge
(450х1000)

17. Addition: technical characteristics of drilling rigs

18. DESCRIPTION OF EQUIPMENT SPECIFICATIONS
DRILLING RIG – GENERAL SPECIFICATIONS
TZJ ZJ30DBS
Name and Serial Number of Drilling Rig
Manufacturer
Drive
Arrangement of drive
Depth of drilling with 114-mm drill pipes
TZJ20
China,
Diesel
Cardan shaft and chain reducer
2000m
ZJ30 DBS
3000 м
DRAWWORKS
Model, type
Rated input
Power supplied to drawworks
Load capacity at line string-up 5х 4
Main brake
Auxiliary brake
JC21F
Diesel САТ3412
475 Kwt
125t (1250кN)
Brake tape
WCB224(EATON) water-cooled
JC28/11,
410x2 kW
410 x2kW
(5х6) 280t (2800kN)
WCB324(EATON) water-cooled
CROWNBLOCK
Manufacturer:
Model:
ТС 125
Load capacity t
Number of sheaves:: шт
Drilling line diameter: ,6 mm
Sheave diameter: unit of 915vv
Sheave diameter: units of 760mm
China
ТС 180
Load capacity t
Number of sheaves:
Drilling line diameter: mm
Sheave diameter мм- 5units
Sheave diameter: мм-1unit

19. Outside diameter of sheaves Number of sheaves Load capacity
HOOK BLOCK
Manufacturer
Model
Outside diameter of sheaves
Number of sheaves
Load capacity
Compatible with rated weight load and size of derrick crown block
China,
YG160B
760mm 4
125 t
YG 180
915 мм 5
180 t
SWIVEL
Rated load is compatible with derrick and rotary table
Rated load is compat. with derrick and rotary table
Static load capacity
Operating pressure
SL-160
160 t
35 MPa
SL-225
225t
BAILS
Length
Permissible load
Number of sets
Russia, forged and having sufficient length
ШБД-125
1800 mm
1 set
ШБД-220
1800 мм
220 t
DERRICK
Type
Maximum hook load at line string-up 5х4
Height of derrick (from supporting surface of crownblock)
Size of drilling floor (derrick legs axes)
Height of drilling floor
Derrick erection
JJ15836 K-shaped with open front face
125t
36 m
3х6m 6m
Telescopic hydrocylinders
JJ18038, Telescopic, 2-section with open front face
(5х6) 180t
38 м
3х6м 6м
DRILLING LINE
According to АРI SPEC 9B.
Line diameter : 28,6mm
Line diameter : 32 mm
DEAD LINE ANCHOR
MANUFACTURER
MODEL
JZG 20
Max. Line pull кN
Rope diameter ,6 mm
JZG 34A
Max. Line pull - 280кN
Rope diameter мм

20. DERRICK FLOOR EQUIPMENT
ROTARY TABLE
MANUFACTURER
MODEL
Russia
 Р-560 with ПКР
Mechanic drive
Maximum opening mm
Static table load t
Speed of rotation …250 rev/min
Transmission: reduction gear with drive shaft through air line coupling
Р-560
Static table load kN
BUSHING FOR ROTATION OF KELLY JOINT
Available
KELLY JOINT
Quadrangular kellies, for a main hole of well and small diameter hole by 2 units of each size.
Kelly saver sub should be of non-rotatable type
Manufacturer: China
Size 140х140 mm and 89х89 mm
POWER CYLINDERS FOR UNSCREWING DRILL PIPES CONNECTIONS
China,
Hydraulic complete sets
DRILL PIPE ELEVATORS
2 units of each standard size КМ: КМ КМ
КМ 89 ПН-200.
КМ 114 ПК-250.
DC ELEVATORS
КМ for DC of OD 102mm.
КМ for DC of OD 178mm.
PRODUCTION STRING ELEVATORS КМ КМ КМ КМ

21. DRILL PIPE/ CASING TONGS
АКБ-ZQ type –For drill pipes ( mm) 100KN/m
ГКШ For casing (89-500mm) KN/m with torque gage
POWER SLIPS FOR DRILL PIPES / DRILL COLLARS, CASINGS
ПКР-560
DRILL COLLAR SAFETY CLAMPS
Available for all diameters of drill collars
WEIGHT INDICATOR
PETRO LINE ДЕЛ140-4П
POWER UNIT
Manufactured in the USA
САТ-3412 – 1 unit.
USA
Drawworks drive. Diesel САТ unit.396 кW,
Pump drive. Diesel САТ units. 475 кW,
GENERATING UNITS AND ROOM FOR GENERATING UNITS
Manufacturer : USA
Type: Diesel-electric units
Rated power of motor: 292KW
Number of units
Frequency Hz
Voltage V
Total power KW
Additional 125kW reserve diesel enginel-generator available
FUEL TANKS
Fuel tank х 25m3
DRILL PIPES
DRILL PIPES WITH OUTER DIAMETER 4 1/2"х 0,362 (114 х 9,19)
GOST Р
Weight 30,0 kgf/m (wall thickness of 9,19 mm)
Number of joints: 300
Total length : 2500m
Type of connection box and pin З-122
New
Manufacturer: Russia
SHORT JOINTS OF DRILL PIPES WITH OUTER DIAMETER 4 1/2 "
Length – 1,5m – 1
Length – 3m – 1
Length – 4,5m – 1

22. DRILL PIPES WITH OUTER DIAMETER
3 1/2" х 0,368 (89 х 9,35) ТУ
Weith 23,0 kgf/m (wall thickness of mm)
Number of joints: 540
Total length: 4500m
Type of connection: З - 86
New
Manufacturer: Russia
SHORT JOINTS OF DRILLING PIPES WITH OUTER DIAMETER 3 1/2
Length – 1,5m – 1
Length – 3m – 1
Length – 4,5m – 1
DRILL COLLARS 8" (203,0)
OD 203mm, ID 80mm.
Weight 214 kgf/m
Type of connection З-171
Total length: 50 м
Keyway
DRILL COLLARS 7" (178,0)
OD 178mm, ID 80mm.
Weight 156 kgf/m
Type of connection : З-147.
Total length: м
Type of connection : З-147.
DRILL COLLARS 4 1/4" (108,0)
OD 108mm, ID 51mm.
Weight 63 kgf/m
Type of connection :З-86.
Connection type :З-86.
CROSSOVER SUBS
Quantity: 3 units of each size
Detailed specifications are given below:
7 5/8" reg. pin X 6 5/8" reg. box X 1,22 m
7 5/8" X6 5/8" X 1,22 m
6 5/8" reg. pin X 4 1/2" IF box X 1,22 m
6 5/8" X4 1/2" 1.22m
4 1/2" IF pin X 4 1/2" IF box X 1,22 m
4 1/2" 4 1/2" X 1,22 m
3 1/2" IF pin X 2 7/8" IF box X 1,22 m

23. BIT SUBS
Delivery of complete sets of API standartized bit subs for all Contractor’s pipe types. Min length of each sub – 3 feet. Min quantity – 3 units of each size. There is a hole drilled a for reverse valve.
Quantity: 3 units of each size
Detailed specifications are given below:
7 5/8" reg. box X 7 5/8" reg. box X 0,915 м
7 5/8" X 7 5/8" reg. X 0,915 м
6 5/8" reg. box X 7 5/6" reg. box X 0,915 м
6 5/8" X7 5/8" X 0,915 м
4 1/2" reg. box X 4 1/2" IF box X 0,915 м
4 1/2" X4 1/2" X 0,915 м
3 1/2" reg. box X 3 1/2" IF box X 1,22 м
3 1/2* X3 1/2" X 1,22 м
EQUIPEMENT FOR BITS’ SCREWING ON AND OFF
Available
For bits of 24". 17-1/2", 14-3/4", 12-1/4", 9-7/8", 8-1/2" and 6"
EQUIPMENT FOR RIH OF CASING AND TUBING
Equipment for loading/unloading, transportation and RIH of casing is ready and in complete sets. Manual rotating and hydraulic tongs ГКШ-4000 with the slip from 89 to 500mm. Manufactured in Russia.
ELEVATORS FOR RIH / PU OF CASING WITH SIDE LOCK
Quantity: 3 units of each standart size
Manufactured in Russia
Model: (elevators of КМ type)
Casing size (inches): from 16 ¾ " to 7"
Rated load capacity, t
16 ¾ " t:
12 ¾ " t:
9 5/8 " t:
7" t:

24. POWER SLIPS
ПКР-560
CASING AND TUBING GAGE
Available
1 set for each standard size of casings
CASING THREAD PROTECTOR
DRILLING MUD CIRCULATION SYSTEM
MUD PUMPS
Mud pump 8Т-650, including spare parts
Capacity -475kW; max pressure – 32MPA; dimensions х 2000 х 1500мм; weight-12,5t.-2 units.
Capacity -475kW; max pressure – 32MPA; dimensions х 2000 х 1500мм; weight-12,5t
MUD TANKS
Number of mud tanks (including treatment unit): 4
Net volume of drilling mud: not less than 270 м3
Volume of tanks for liquid chemical agents:3 m3
WATER TANKS
Water tank volume: m3
SHALE SHAKERS
Quantity: 2 sets
Manufacturer: Russia
Model: СВ1-Л
Productivity 0,045м3 /sec
Productivity 113м3 /час
HYDROCYCLONE
Quantity: 1 sets
Model ГЦК – 360
Delivery pump capacity: kW
Productivity 65 м3/hr
DESILTER
Model: ИГ45м
Delivery pump capacity: 55 kW
Productivity 45 м3/hr
CENTRIFUGE
Model: ОГШ 511
MIXERS
Mechanic ПМ-875
Hydraulic Р= 6,4 MPAа, 1 unit
Mechanic type ПМ units
Hydraulic Р= 6,4 MPa, 15 units
GAS SEPARATOR FOR DRILLING MUD
Gas Separator-settler:
HORIZONTAL VACUUM GAS SEPARATOR
VERTICALLY INSTALLED IN DERRICK vacuum gas separator Manufacturer: USA, Model: DERRICK, VACU-FLO 1200, Capacity: 272m3 /hour
VERTICALLY INSTALLED IN DERRICK vacuum gas separator
Model: КАСКАД
Productivity: 40м3 /hr

25. PRESSURE MANIFOLD (STANDPIPE )
Operating pressure (psi): 5000
HIGH PRESSURE MUD LINES
Operating pressure psi.
MUD HOSE
Manufacturers : China Khongkhua
Operating pressure: 5000 psi
Manufacturers : Khongkhua
FISHING TOOLS
Made in Russia :
Spears per ТУ
Nonreleasing spears ТУ
Releasing spears ТУ
Segment –type grapple ТУ
Die collars DОСТ
Fishing taps DОСТ
Mills , ТУ
Pilot mills ОСТ
Bottom hole mills ОСТ
Cutting and grinding mills ОСТ
Impression blocks ТУ
Contractor will provide a complete range of fishing tools and devices to fish any well equipment of Contractor.
REVERSE CIRCULATION JUNK BASKET
Manufacturer: Russia
Number: 1 of each type for each size of well according to the specifications.
JUNK MILLS
Number: 1 of each type for each size of well according to the specifications
Number: 1 of each type for each size of well according to the specifications

26. OVERSHOT
Number : one unit of each type
Manufacturer and Model: Russia
Type: LT143, LT206, LT245, LT273
Outside diameter of the body (inches): 5-7/8",8-1/8"(9-W8\10-3/4"
Outside diameter of the wall hook (inches): 15",12"
Length of the extension sub (inches): 3 feet
Top sub connection: NC38, NC50, 4 ½, IF 5-1/2FH, 7 1/2"
Diameter of fishing jobs target (spiral thread) (inches):
+3 1/2" 4-3/4", +5" 6 1/2" 6 5/8" 6 3/4" 7", +7 3/4" 8", 9".
Max. diameter of fishing jobs target (junk basket) (inches) 4-1/2", 5-1/2", 7-1/2", 7-7/8".
JUNK SUB (BOOT BASKET)
Manufacturer и Model: Russia
Number: 1 of each type for each size of well according to the specifications
Number: 1 of each type for each size of well according to the specifications
SAFETY JOINT
Manufacturer: Russia
Safety joints of each type with 4-1/2" IF box X pin complete with guide thread connection (for unscrewing)
Safety joints 2 units of each type with 4-1/2" IF box X pin complete with guide thread connection (for unscrewing)
FISHING MAGNET
Well sizes: 17-1/2", 14-3/4", 12-1/4", 9-7/8", 8-1/2"
IMPRESSION BLOCKS
Manufacturer: Russia, Type of impression blocks - lead, one for each size of well
Manufacturer: Russia, Type of impression blocks - lead, one for each size of well
DITCH MAGNET
To catch metal grit, which come through flow lines
Made in Russia
HYDRAULIC RELEASING SUB FOR FISHING JOBS
Manufacturer: Russia
Model: KXJ KXJ62
Connection: /8R NC46

27. CASING SPEAR
Made in Russia for all casing sizes to be used
BLOWOUT PREVENTOR EQUIPMENT According to well drilling project
Manufacturer: Russia
Universal hydraulic blowout preventer
Kill manifold - 1set
Separator unit - 1set
Pipes - 1set
Master panel - 1set
Auxiliary console - 1set
Manifold - 1set
Choke manifold - 1set
DRILLING RIG INSTRUMENTATION
All metering devices on the drilling rig, regardless of their position on the drilling rig platform, are explosion-proof. PETROLINE system is installed.
Drilling parameters deviations’ metering device
Depending on well type and client’s requirements
EQUIPMENT FOR WELDING AND METAL CUTTING
AC Transformer . Gas cutter
AIR COMPRESSORS
Model includes 2units of Screw compressors ДЭН45, with productivity of 7,5 m3./min. under pressure of 1MPa
Buffer air collector: 2units х2м3
DRILLING MUD CONTROL
OFFIL Laboratory
VERTICAL SLUDGE PUMP
Model: ВШН – UNIT
Capacity 150 m3/hour
Electric motor АО Power: 30 kW

28. DRILL WATER TRANSFER PUMP
Manufacturer: China
Model: VICTORY.
Capacity m3/hour
Power: 55kW
RETURN WATER PUMP
Manufacturer: Russia
Model: НБ-32
Power: kW
PIPE RACK
Length-38 м
Hight-1070мм
Width-1200мм
5 racks with protective shield
CATWALK
Equipped with ladders, solid floor, dismountable, the height is in accordance with pipe parameters
Manufacturer: Russia. Type: box type
Overall dimensions: мм X 1070мм X2288м м
Permissible load: for drill pipes and Drill Collars
DERRICK LADDER
Tunnel ladder type with gangways
RAILING
Height 1,25m
VERTICAL SLUDGE PUMP
Manufacturer: Russia. Model; ВШН - 150
power: 30 kW . Capacity m3/hour
DRILL LINE SPOOLER
Type: Mechanical

29. 22 buildings equipped with facilities
DRILLING RIG HAND TOOLS
A complete range of hand tools, which includes, but not limited to, striking wrenches for all BOP equipment of the Contractors, mud pumps, etc., a complete range of tongs from 56" and up to 8", a complete range of tongs and socket wrenches of metric and imperial sizes from 3/8" up to 2", complete set of couplings 3/4" with couplings up to 2" in diameter, complete range of couplings 3/8" with couplings up to 1-1/4", pneumatic or hydraulic impact wrench with a complete set of heads, extensions, universal joints, etc.; suitable for BOP equipment of the Contractors, mud pumps, etc. Manually –operated angle grinders, hacksaws, sledge hammers, ball peen hammers, power hammers, perforators, bits, screwdrivers, hydraulic cable cutter, bench vise, chain vise, chain tongs from 56" up to 24" and manually operated and pneumatic pipe cutters for cold cut of casings 13-3/8", 10-3/4", 9-5/8"in diameter.
A complete range of hand tools, which includes, but not limited to, striking wrenches for all BOP equipment of the Contractors, mud pumps, etc., a complete range of tongs from 56" and up to 8", a complete range of tongs and socket wrenches of metric and imperial sizes from 3/8" up to 2", complete set of couplings 3/4" with couplings up to 2" in diameter, complete range of couplings 3/8" with couplings up to 1-1/4", pneumatic or hydraulic impact wrench with a complete set of heads, extensions, universal joints, etc.; suitable for BOP equipment of the Contractors, mud pumps, etc. Manually –operated angle grinders, hacksaws, sledge hammers, ball peen hammers, power hammers, perforators, bits, screwdrivers, hydraulic cable cutter, bench vise, chain vise, chain tongs from 56" up to 24" and manually operated and pneumatic pipe cutters for cold cut of casings 13-3/8", 10-3/4", 9-5/8"in diameter.
SAFETY FACILITIES AND FIRE-FIGHTING EQUIPMENT
Fire hydrant, fire hoses, fire extinguishers, hooks, buckets, crows
Fire hydrant, fire hoses, fire extinguishers, hooks, buckets, crows
STAND ALONE BREATHING APPARATUSES
Isolated gas masks
FIRE EXTINGUISHERS
Number: 30Type : СО2, powder-type fire extinguisher, other types Location: At the working places and on the derrick base
Number: 30Type : СО2, powder-type fire extinguisher, other types Location: At the working places and on the derrick base
EYEWASH AREAS
Manufacturer: Russia Field hospital
PERSONAL PROTECTIVE EQUIPMENT FOR PEOPLE WORKING INSIDE OF DRILLING RIG
Work clothes, safety glasses, hard hats, aprons
ANTI-SKID SYSTEM FOR DRILLING RIG FLOOR
Manufacturer: China
WARNING SIGNS
According to the hazardous factors at the Drilling Rig
ACCOMMODATION BUILDINGS AND CANTEENS
22 buildings equipped with facilities
CAMP ON DRILLING SITE
3 blocks kitchen and canteens
1 drilling foreman’s office and bedroom
1 meetings’ block
1 sauna block
1 supervisor office block
1 medical and relaxation block.
8 bedroom blocks contractors’ blocks
1 hand tools storage block
1 chemicals’ storage block блок для хранения хим.реагентов
2 drying blocks

30. DESCRIPTION OF EQUIPMENT
SPECIFICATIONS
DRILLING RIG – GENERAL SPECIFICATIONS
ZJ50DBS
ZJ70DBS
Name and Serial Number of Drilling Rig.
Year and place of manufacture
Manufacturer
Drive
Arrangement of drive
Depth of drilling with 114-mm drill pipes
ZJ50 DBS
2007 , China
China,
Diesel-electric
Separate table drive
4500 m
ZJ70 DBS
Diesel-electirc
7000 м
HOISTING EQUIPMENT
Top drive TDS 9SA VARCO
DRAWWORKS
Model, type
Rated input
Power supplied to drawworks
Load capacity at line string-up 6х 7
Main brake
Auxiliary brake
C50DB-02 , single stage of speed regulation
Electric (AC with frequency regulation)
1400 kW
315 m(3150kN)
Oil disk brake (regenerative with heat removing)
Auxiliary drive unit with power of 45кW for emergency control and autodrilling
JC70DB, single stage of speed regulation
2000 kW
450т (4500кN)
Hydraulic disk brake (regenerative with heat removing)
Auxiliary drive unit with power of 45кW for emergency control and autodrilling
CROWNBLOCK
Manufacturer:
Model:
ТС 350
Load capacity t
Number of sheaves: units
Sheave diameter: mm
Drilling line diameter: mm
Fast crownblock sheave mm
China
ТС 450
Load capacity т
Number of sheaves:
Sheave diameter: мм
Drilling line diameter: 38 мм

31. HOOK BLOCK
Manufacturer
Model
Outside diameter of sheaves
Number of sheaves
Load capacity
Compatible with rated weight load and size of derrick crown block
China,
DG 315
1270 mm 7
315 t
DG 450
1524мм
450t
Compatible with rated weight load and size of derrick crown block
SWIVEL
Rated load is compatible with derrick and rotary table
Static load capacity
Operating pressure
SL-315-5
35 MPa
SL-450-5
450 t
BAILS
Length
Permissible load
Number of sets
Russia, forged and having sufficient length
ШБУ-320
1300 mm
320 t
1 set
1300 мм
320 т
DERRICK
Type
Maximum hook load at line string-up 6х7
Height of derrick (from supporting surface of crownblock)
Size of drilling floor (derrick legs axes)
Height of drilling floor
Derrick erection
JJ315/45-К , K-shaped with open front face
45 m
12х11 m
9 m
Main drawworks (auxiliary drive)
JJ450/45-К
K-shaped no tensed line
450т
45 м
12х10,13м 9м
TOP DRIVE SYSTEM
VARCO TDS-9SA
Max. torque -62,4kNm
Rated. torque -32~43 kNm at 114 rev/min
VARCO TDS-11SA
Max. torque -62,4кNм
Rated. torque -32~43кNм at 114 rev/min
DRILLING LINE
According to АРI SPEC 9B.
Line diameter : 35 mm
According to АРI SPEC 7К.
Line diameter : 38 мм
DEAD LINE ANCHOR
MANUFACTURER
MODEL
JZG 34A
Max. Line pull- 340kN
Rope diameter mm
Max. Line pull - 340кN
Rope diameter мм

32. DERRICK FLOOR EQUIPMENT
ROTARY TABLE
MANUFACTURER
MODEL
China,
ZP375
electric drive
Maximum opening ,5mm
Static table load t
Speed of rotation 0…300 rev/min
Transmission: reduction gear with drive shaft through air line coupling
Maximum opening ,5мм
Static table load т
Speed of rotation …300 rev/min
Transmission: reduction gear with drive shaft through air line coupling
BUSHING FOR ROTATION OF KELLY JOINT
Available
KELLY JOINT
Quadrangular kellies, for a main hole of well and small diameter hole by 2 units of each size.
Kelly saver sub should be of non-rotatable type
Manufacturer: China
Size 140х140 mm and 89х89 mm
Quadrangular kellies, for a main hole of well and small diameter hole by 2 units of each size.
POWER CYLINDERS FOR UNSCREWING DRILL PIPES CONNECTIONS
Hydraulic complete sets
DRILL PIPE ELEVATORS
2 units of each standard size
Size 3 ½"
Rated load capacity 247 t
Size 5”
2 units of each standard size КМ:
КМ 127 ПК-250.
КМ 89 ПН-200.
КМ 60 ПН-125.
DC ELEVATORS
Size 9 ½ "
Rated load capacity 148 t
Size 8"
Size 7"
Rated load capacity 99 t
КМ for DC with OD 89мм.
КМ for DC with OD 178мм.
КМ for DC with OD 203мм.
PRODUCTION STRING ELEVATORS
For DC with OD 9 ½ " - 3 units
Connection 8" Reg
For DC with OD 8 " - 4 units
Connection 7" Reg
For DC with OD 7 " – 6 units
Connection 5 ½ " Reg КМ КМ

33. DRILL PIPE/ CASING TONGS
АКБ-ZQ type –For drill pipes ( mm) 100KN/m
ГКШ For casing (89-500mm) KN/m with torque gage
АКБ-ZQ type –For drill pipes ( мм) 100КN/м
ГКШ type –For drill pipes (89-500мм) КN/м
with torque gauge
POWER SLIPS FOR DRILL PIPES / DRILL COLLARS, CASINGS
Pneumatic spider Load capacity 350 t
Slips DCS –R4 1/2"-6 ",6 ¾ "8 1/4 ",13 5/8"
Pneumatic spider Г/П350тt
DRILL COLLAR SAFETY CLAMPS
Available for all diameters of drill collars
WEIGHT INDICATOR
МD ТОТСО
POWER UNIT
China,
Drawworks drive. Electric motor YJ23 -2un. 600 кW, 600V
Rotor Drive. Electric motor YJ23 -1unit.600 кW, 600V
Pump drive. Electric motor YJ31 -2units.1200 кW, 600V. USA. Top drive 2 units х245кW 690V
Drawworks drive. Electric motor YJ31 -2, .970 кW, 600V
Rotor Drive. Electric motor YJ кW, 600V
Pump drive. Electric motor YJ кW, 600V
USA
Top drive 2units х245кW 600V
GENERATING UNITS AND ROOM FOR GENERATING UNITS
Manufacturer : USA
Type: Diesel-electric units
Rated power of motor: kW
Number of units
Frequency Hz
Voltage : V
Total power: kW
One room in nearderrick structure
Number of units units
Frequency: Hz
Voltage: V
Total power:: kW
One room in near derrick structure
FUEL TANKS
Fuel tank х 50m3 .
FUEL TANKS 6 х 50м3
DRILL PIPES
DRILL PIPES WITH OUTER DIAMETER 5"х 0,362 (127 х 9,19)
Category G-105
Weight 30,0 kgf/m
Number of connections: 430
Total length: m
Type of connection NC 50 (4 ½" IF)
API Classification: Premium, Range 2
Manufacturer: China
GOST Р
Weight 30,0 kgf/м (wall thickness of 9,19 мм)
Number of connections: 500.
Total length : 6000м
Type of connection GOST box and pin З-133
New
Manufacturer: Russia
SHORT JOINTS OF DRILL PIPES WITH OUTER DIAMETER 5
Length– 1,5 m – 1 unit
Length– 3 m – 1 unit
Length– 4,5 m – 1 unit
Length – 1,5 м – 1
Length – 3 м – 1
Length – 4,5 м – 1

34. DRILL PIPES WITH OUTER DIAMETER 3 1/2" х 0,368 (89 х 9,35)
Category G-105
Weight 23 kgf/m
Number of connections: 430
Total Length(m): 4500 m
Type of connection NC 38 (3 ½" IF)
API Classification: Premium, Range 2
Manufacturer: China ТУ
Weight 23,0 kgf/м (wall thickness of 9.35 мм)
Number of connections: 732шт
Total length (м): 6000м
Type of connection : З - 102
box and pin: ЗП
New
Manufacturer: Russia
SHORT JOINTS OF DRILLING PIPES WITH OUTER DIAMETER 3 1/2
Length– 1,5 m – 1 unit
Length– 3 m – 1 unit
Length– 4,5 m – 1 unit
Length – 1,5 м – 1
Length – 3 м – 1
Length – 4,5 м – 1
DRILL COLLARS (DC) 9 1/2" (241,3)
OD 9 1/2", ID 2 13/16"
Weight 327,4 kgf/m
Type of connection 7 5/8" REG
Total length: 25 m
Spiral - corrugated
Keyway
DRILL COLLARS (DC) 8" (203,0)
OD 8", ID 3 1/7"
Weight 240 kgf/m
Type of connection 6 5/8" REG
Total length: 50 m
OD 203мм, ID 80мм.
Weight 214 kgf/м
Type of connection З-171
Total length: 50 м
DRILL COLLARS (DC) 7" (178,0)
OD 7", ID 2 13/16"
Weight 150 kgf/m
Type of connection 4" IF
Total length: m
OD 178мм, ID 80мм.
Weight 156 кгс/м
Type of connection:З-147.
Total length: м
CROSSOVER SUBS
Number : 3 units of each
Detailed description is below:
7 5/8" reg. pin X 6 5/8" reg. box X 1,22 m
7 5/8" X6 5/8" X 1,22 m
6 5/8" reg. pin X 4 1/2" IF box X 1,22 m
6 5/8" X4 1/2" 1.22m
4 1/2" IF pin X 4 1/2" IF box X 1,22 m
4 1/2" 4 1/2" X 1,22 m
3 1/2" IF pin X 2 7/8" IF box X 1,22 m
Quantity: 3 units of each size
Detailed specifications are given below:
7 5/8" reg. pin X 7 5/8" reg. pin X 0,915 м
7 5/8" X 7 5/8" reg. X 0,915 м
6 5/8" reg. pin X 7 5/6" reg. pin X 0,915 м
6 5/8" X7 5/8" X 0,915 м
4 1/2" reg. pin X 4 1/2" IF box X 0,915 м
4 1/2" X4 1/2" X 0,915 м
3 1/2" reg. pin X 3 1/2" IF box X 1,22 м
3 1/2* X3 1/2" X 1,22 м

35. CASING THREAD PROTECTOR DRILLING MUD CIRCULATION SYSTEM
POWER SLIPS
Air-operated spider, load capacity 350t
Slips DCS –R4 1/2"-6 ",6 ¾ "8 1/4 ",13 5/8"
Air-operated spider, load capacity 350t
CASING AND TUBING GAGE
Available
1 set for each standard size of casings
1 set for each casing standard size
CASING THREAD PROTECTOR
DRILLING MUD CIRCULATION SYSTEM
MUD PUMPS
Mud pump F-1600, including spare parts
Power -1176kW; max. pressure - 34,3MPa; max. delivery - 50,42l/sec; dimensions-7500 х 2800 х 2688mm; weight-38t
Mud pump F-1600, including spare parts
Capacity -1176kW; max pressure - 34,3МПа; max. delivery - 50,42 l/sec; dimensions-7500 х 2800 х 2688мм; weight-38t.-2units
MUD TANKS
Number of mud tanks (including treatment unit) : 6 .
Net volume of drilling mud: not less than 370 m3
Volume of tanks for liquid chemical agents:3 m3
Number of mud tanks (including treatment unit): 6.
Net volume of drilling mud: not less than 480 м3
Volume of tanks for liquid chemical agents:3 м3
WATER TANKS
Water tank volume: m3
Water tank volume: м3
SHALE SHAKERS
Number : 3 sets
Manufacturer: DERRICK, USA
Model: FLO-LINE
Capacity: 113m3 /hour
Quantity: 3 sets
Productivity 113м3 /hr
HYDROCYCLONE
Number 1 set
Manufacturer: DERRICK, USA
Model DSV-10-3
Delivery pump power: kW
Capacity: 65 m3/hour
Quantity: 1 комплект
Manufacturer: DERRICK, США
Model DSV-10-3
Productivity 65 м3/hr
DESILTER
Manufacturer: DERRICK, USA . Model: S 416-S
Delivery pump power: 55 kW
Capacity: 45 m3/hour
Model: S 416-S
Delivery pump power: 55 kW
Productivity 45 м3/hr
CENTRIFUGE
Model: DE 1000, Capacity: 45 m3/hour
Модель: LW450х1000
MIXERS
Manufacturer: China
Mechanical NJ 15 un. Hydraulic Р= 6,4 MPa, 15 units
Mechanical NJ15 -12units
Mechanical NJ5,5 -1unit
Hydraulic Р= 6,4 MPa, 9units
GAS SEPARATOR FOR DRILLING MUD
Gas Separator-settler:
Manufacturer: China
HORIZONTAL VACUUM GAS SEPARATOR
VERTICALLY INSTALLED IN DERRICK vacuum gas separator Manufacturer: USA, Model: DERRICK, VACU-FLO 1200, Capacity: 272m3 /hour
VERTICALLY INSTALLED IN DERRICK vacuum gas separator
Manufacturer: USA
Derrick: DERRICK, VACU-FLO
Productivity: 272м3 /hr

36. PRESSURE MANIFOLD (STANDPIPE )
Operating pressure (psi): 5000
HIGH PRESSURE MUD LINES
Operating pressure 5000 psi, a separate line from each pump to pressure manifold of standpipe on the drill floor should be provided – totally two lines all the way from the mud pumps to the drill floor
Operating pressure 5000 psi, a separate line from each pump to pressure manifold of standpipe on the drill floor should be provided – totally two lines all the way from the mud pumps to the drill floor
MUD HOSE
Manufacturers : China
Operating pressure: 5000 psi
CEMENTING STANDPIPE
Connected to the standpipe manifold on the drill floor, minimum 2 shut-off valves and 2 outlets for indicators with shut-off valves. Available Р psi
Connected to the standpipe manifold on the drill floor, minimum 2 shut-off valves and 2 outlets for indicators with shut-off valves. Available Р psi
FLEXIBLE HOSE FOR CEMENTING
1 set with inner diameter 2" x psi. shut-off valves and plug valves complete with hinged joints Style 50. Operating pressure (psi): Independent cementing line and line which passes under the floor , to release pressure in a standpipe
1 set with inner diameter 2" x psi. shut-off valves and plug valves complete with hinged joints Style 50. Operating pressure (psi): Independent cementing line and line which passes under the floor , to release pressure in a standpipe
FISHING TOOLS
Made in Russia :
Spears per ТУ
Nonreleasing spears ТУ
Releasing spears ТУ
Segment –type grapple ТУ
Die collars DОСТ
Fishing taps DОСТ
Mills , ТУ
Pilot mills ОСТ
Bottom hole mills ОСТ
Cutting and grinding mills ОСТ
Impression blocks ТУ
Contractor will provide a complete range of fishing tools and attachments to fish any well equipment of Contractor.
Spears ТУ
Nonreleasing spears ТУ
Releasing spears ТУ
Die collars ГОСТ
Fishing taps ГОСТ
Mills ТУ , ТУ
Pilot mills ОСТ
Cutting and grinding mills ОСТ
Contractor will provide a complete range of fishing tools and devices to fish any well equipment of Contractor.
REVERSE CIRCULATION JUNK BASKET
Manufacturer: Russia
Number: 1 of each type for each size of well according to the specifications.
Number: 1 of each type for each size of well according to the specifications.

37. OVERSHOT
Number : one unit of each type
Manufacturer and Model: Russia
Type: LT143, LT206, LT245, LT273
Outside diameter of the body (inches): 5-7/8",8-1/8"(9- W8\10-3/4"
Outside diameter of the wall hook (inches): 15",12"
Length of the extension sub (inches): 3 feet
Top sub connection: NC38, NC50, 4 ½, IF 5-1/2FH, 7 1/2"
Diameter of fishing jobs target (spiral thread) (inches):
+3 1/2" 4-3/4", +5" 6 1/2" 6 5/8" 6 3/4" 7", +7 3/4" 8", 9".
Max. diameter of fishing jobs target (junk basket) (inches) 4-1/2", 5-1/2", 7-1/2", 7-7/8".
Type:ТНС
Outside diameter of the body (inches): from 140мм to 245мм
Top sub connection: З-86,З-133,З-147
Diameter of fishing jobs target (spiral thread) (inches): from 89
to 168мм
JUNK MILLS
Manufacturer: Russia
Number: 1 of each type for each size of well according to the specifications
Number: 1 of each type for each size of well according to the specifications
JUNK SUB (BOOT BASKET)
Manufacturer и Model: Russia
Number: 1 of each type for each size of well according to the specifications
Manufacturer and Model: Russia
Number: 1 of each type for each size of well according to the specifications
SAFETY JOINT
Safety joints of each type with 4-1/2" IF box X pin complete with guide thread connection (for unscrewing)
Type:БП and БРП1
Safety joints 2 units of each type with IF box X pin complete with guide thread connection (for unscrewing)
FISHING MAGNET
Well sizes: 17-1/2", 14-3/4", 12-1/4", 9-7/8", 8-1/2"
Well sizes: from 142,9 to 295,3мм
IMPRESSION BLOCKS
Manufacturer: Russia, Type of impression blocks - lead, one for each size of well
Manufacturer: Russia, Type of impression blocks - lead, one for each size of well
DITCH MAGNET
To catch metal grit, which come through flow lines
Made in Russia
HYDRAULIC RELEASING SUB FOR FISHING JOBS
Manufacturer: Russia
Model: KXJ KXJ62
Connection: /8R NC46

38. for all casing sizes to be used BLOWOUT PREVENTOR EQUIPMENT
CASING SPEAR
Made in Russia
for all casing sizes to be used
BLOWOUT PREVENTOR EQUIPMENT
According to well drilling project
Manufacturer: China
Universal hydraulic blowout preventer
Shear rams -1 set
Kill manifold - 1set
Separator unit - 1set
Pipes - 1set
Master panel - 1set
Auxiliary console - 1set
Manifold - 1set
Choke manifold - 1set
DRILLING RIG INSTRUMENTATION
All the drilling rig instrumentation, irrespective of its location on the drilling platform, is explosion –proof. MD ТОТСО system is installed to allow the information to be transmitted over a distance
All the drilling rig instrumentation, irrespective of its location on the drilling platform, is explosion –proof. MD ТОТСО system is installed to allow the information to be transmitted over a distance
DRILLER’S CABIN AND REST AREA
Driller’s cabin includes:
Drilling instrumentation, digital system, control panel, monitor, computers, video surveillance cameras and explosion-proof conditioner etc. Behind the cabin there is a rest area, which includes: conditioner, eyewash area, table, chair, etc.
Drilling instrumentation, digital system, control panel, monitor, computers, video surveillance cameras and explosion-proof conditioner etc. Behind the cabin there is a rest area, which includes: conditioner, eyewash area, table, chair, etc.
Drilling parameters deviations’ metering device
Depending on well type and client’s requirements
DRILLING MUD PIT LEVEL INDICATOR
Manufacturer: USA MD ТОТСО
Ultrasonic, 1 indicator in each drilling mud tank, including gauge tank and trip tank, electronic data storage system, continuous or selective printout, data display on a touch screen in real time, suitable for all areas where it is installed.
To be adapted to a number of tanks.
Ultrasonic, 1 indicator in each drilling mud tank, including gauge tank and trip tank, electronic data storage system, continuous or selective printout, data display on a touch screen in real time, suitable for all areas where it is installed.
MUD VOLUME TOTALIZER
Manufacturer: USA MD ТОТСО. Integrated into the system of drilling mud pit level indicator
Manufacturer: USA MD ТОТСО. Integrated into the system of drilling mud pit level indicator
FLOW METER
Manufacturer: USA MD ТОТСО. Located on a flow line, the indicator is on the driller’s console, where alarm system is provided.
Manufacturer: USA MD ТОТСО. Located on a flow line, the indicator is on the driller’s console, where alarm system is provided.

39. DATA ACQUISITION SYSTEM
It is capable of acquiring and storing data coming from the instrumentation, which is used during drilling. Manufacturer: USA MD ТОТСО
It is capable of acquiring and storing data coming from the instrumentation, which is used during drilling. Manufacturer: USA MD ТОТСО
EQUIPMENT FOR WELDING AND METAL CUTTING
AC Transformer . Gas cutter
AIR COMPRESSORS
Manufacturer: China Khong- Khua. Model includes 2units. Screw compressors QTD45, capacity 7,5 cub.m./min at pressure 1MPa. Air collector: 2units х2m3. Buffer air collector-1,5m3
Manufacturer: China Khong- Khua. Model includes 2units. Screw compressors QTD45, capacity 7,5 cub.m./min at pressure 1MPa. Air collector: 2units х2m3. Buffer air collector-1,5m3
DRILLING MUD CONTROL
OFFIL Laboratory
VERTICAL SLUDGE PUMP
Manufacturer: Russia
Model: ВШН – UNIT
Capacity 150 m3/hour
Electric motor АО Power: 30 kW
DRILL WATER TRANSFER PUMP
Manufacturer: China Khong- Khua
Model: VICTORY.
Capacity m3/hour
Power: 55kW
RETURN WATER PUMP
Model: НБ-32
Power: kW
PIPE RACK
Length-20 m
Height-1,5m
Width-28 racks with protective shield
Manufacturer: China according to Russian standards
Length-20 м, Height-1,5м, Width-2
8 racks with protective shield
CATWALK
Equipped with ladders, solid floor, dismountable, the height is in accordance with pipe parameters
Manufacturer: Russia. Type: box type
Overall dimensions: m X 1,5m X2 m
Permissible load: for drill pipes and Drill Collars
Dimensions: м X 1,5м X2 м
DERRICK LADDER
Tunnel ladder type with gangways
RAILING
Height 1,25m
Height 1,25м
EMERGENCY EXIT SLIDE
Manufacturer: China Khong-Khua
Manufacturer: China
VERTICAL SLUDGE PUMP
Manufacturer: Russia. Model; ВШН - 150
power: 30 kW . Capacity m3/hour
DRILL LINE SPOOLER
Type: Electric- Mechanical
Model DDS-35

40. Fire hydrant, fire hoses, fire extinguishers, hooks, buckets, crows
DRILLING RIG HAND TOOLS
A complete range of hand tools, which includes, but not limited to, striking wrenches for all BOP equipment of the Contractors, mud pumps, etc., a complete range of tongs from 56" and up to 8", a complete range of tongs and socket wrenches of metric and imperial sizes from 3/8" up to 2", complete set of couplings 3/4" with couplings up to 2" in diameter, complete range of couplings 3/8" with couplings up to 1-1/4", pneumatic or hydraulic impact wrench with a complete set of heads, extensions, universal joints, etc.; suitable for BOP equipment of the Contractors, mud pumps, etc. Manually –operated angle grinders, hacksaws, sledge hammers, ball peen hammers, power hammers, perforators, bits, screwdrivers, hydraulic cable cutter, bench vise, chain vise, chain tongs from 56" up to 24" and manually operated and pneumatic pipe cutters for cold cut of casings 13-3/8", 10-3/4", 9-5/8"in diameter.
A complete range of hand tools, which includes, but not limited to, striking wrenches for all BOP equipment of the Contractors, mud pumps, etc., a complete range of tongs from 56" and up to 8", a complete range of tongs and socket wrenches of metric and imperial sizes from 3/8" up to 2", complete set of couplings 3/4" with couplings up to 2" in diameter, complete range of couplings 3/8" with couplings up to 1-1/4", pneumatic or hydraulic impact wrench with a complete set of heads, extensions, universal joints, etc.; suitable for BOP equipment of the Contractors, mud pumps, etc. Manually –operated angle grinders, hacksaws, sledge hammers, ball peen hammers, power hammers, perforators, bits, screwdrivers, hydraulic cable cutter, bench vise, chain vise, chain tongs from 56" up to 24" and manually operated and pneumatic pipe cutters for cold cut of casings 13- 3/8", 10-3/4", 9-5/8"in diameter.
SAFETY FACILITIES AND FIRE-FIGHTING EQUIPMENT
Fire hydrant, fire hoses, fire extinguishers, hooks, buckets, crows
STAND ALONE BREATHING APPARATUSES
Isolated gas masks
FIRE EXTINGUISHERS
Number: 30Type : СО2, powder-type fire extinguisher, other types Location: At the working places and on the derrick base
Number: 30Type : СО2, powder-type fire extinguisher, other types Location: At the working places and on the derrick base
EYEWASH AREAS
Manufacturer: Russia Field hospital
PERSONAL PROTECTIVE EQUIPMENT FOR PEOPLE WORKING INSIDE OF DRILLING RIG
Work clothes, safety glasses, hard hats, aprons
ANTI-SKID SYSTEM FOR DRILLING RIG FLOOR
Manufacturer: China
WARNING SIGNS
According to the hazardous factors at the Drilling Rig
ACCOMMODATION BUILDINGS AND CANTEENS
31 buildings equipped with facilities
31 buildings equipped with facilities

41. 1 block shower-rest room 1 block laboratory
CAMP ON DRILLING SITE
2 blocks drying units
1 block repair
1 block shower-rest room
1 block laboratory
1 block tool pusher’s office
1 block supervisor’s office
3 blocks of kitchen and canteens
1 drilling foreman’s office and bedroom
1 block for female personnel accommodation
1 meetings block
1 sauna block
3 supervisor's office block
1 medical and relaxation block.
8 bedroom blocks
2 blocks for contractors'’ accommodation
1 tools storage block
1 chemicals’ storage block
2 drying blocks
BASE CAMP
1 block for expedition management accommodation
2 blocks canteen, kitchen
2 blocks recreation room
1 block shower-rest room
1 block sauna
8 blocks accommodation
1 container -refrigerator
1 block sitting room
1 block expedition’s office
2 blocks for the third-party contractors
1 block health and sanitary
1.meetings block
2 hotel block
1 drying block

44. 44

45. CONTACTS «Drilling Systems», JSC Joint Stock Company Activity
oil&gas well construction
Tel/fax: +7 (3412) , ,
Address:
427000, 1, Golyanskaya, Zavyalovo, Russia, Udmurt Republic
Website: