1. Notes:
For the installation of a PB network, you can use shielded twisted pair copper cable, glass or plastic FO and infrared components. And you can mix these components for one network.

2. PROFIBUS Expert Talk Chapter 1 - Overview
Chapter 2 - Bus Physics & Wiring
Chapter 3 - PROFIBUS Basics
Chapter 4 - PROFIBUS Details
Chapter 5 - Diagnostic & Troubleshooting
Chapter 6 - PROFIBUS DP Extensions
Chapter 7 - PROFIBUS for Process Automation
Chapter 8 - New Features
Chapter 9 - ASICs
Chapter 10 - PROFIBUS Interface Center
Notes:
Independent of proprietary solution - use of a standardized protocol
vendor independent - multiple vendors offer interconnectivity
cost savings - save in installation, startup and maintenance
increase of productivity in terms of
faster - faster communication possible
more flexible - startup with separate parts of the whole installation possible
easy expandable - add on with 2 wires is easy
customized - the variety of products from different companies allows a customized solution. The perfomed solution for your needs.
= Recommended
= Optional

3. Customer Expectations
Cost Savings
Flexibility
Reliable & Future oriented
Solution for all Automation Needs
Notes:
Independent of proprietary solution - use of a standardized protocol
vendor independent - multiple vendors offer interconnectivity
cost savings - save in installation, startup and maintenance
increase of productivity in terms of
faster - faster communication possible
more flexible - startup with separate parts of the whole installation possible
easy expandable - add on with 2 wires is easy
customized - the variety of products from different companies allows a customized solution. The perfomed solution for your needs.
Interoperability & Vendor Independence
! Standard !

4. How does PROFIBUS fulfill all these needs?
Notes:
What kind of requirements do user have to fieldbus systems ?
1st of all, it has to be deterministic; if you’re going to replace the classic parallel wiring you still want to be able to calculate your cycle time and therefore the reaction time of your system to certain events
flexibility - it should be easy to expand or change the system
interoperability - devices from several vendors will be connected to the fieldbus; thus the solution has to be open AND vendor independent
cost effective - the overall costs for hardware, engineering, installation and maintenance must decrease; you don’t want to spend more money then for the already existing solution
reliability - a fieldbus needs to provide features which make sure that the reliability is equal or higher as with parallel wiring
easy to use - fieldbus must be easy to install, to configure and to evaluate diagnostics in the case of an error
automation needs - the system of your choice should cover the communication requirements of simple I-/O-devices and (at the same time) of intelligent drives or MMI-systems
to fullfill all this requirements, we need standardization
PROFIBUS is part of the Open Standard
IEC 61158

5. PROFIBUS International *
NAFTA
136 Members
China
102 Members
Germany
230 Members
Fastest Growing
User Association
Notes:
*Status: Q1/2000

6. How does PROFIBUS work? - continued
Address:
Mike Bryant (PTO Director)
16101 N. 82nd Street Suite 3B
Scottsdale, AZ 85260
Phone (480)
Fax (480)
Address:
PROFIBUS Interface Center
P.O. Box 4991
Johnson City, TN
Phone (423)
Fax (423)
Notes:

7. Interoperability & Vendor Independence
1,000 members in 23 user associations *
1,900 products from more than 280 different vendors *
Notes:
What kind of requirements do user have to fieldbus systems ?
1st of all, it has to be deterministic; if you’re going to replace the classic parallel wiring you still want to be able to calculate your cycle time and therefore the reaction time of your system to certain events
flexibility - it should be easy to expand or change the system
interoperability - devices from several vendors will be connected to the fieldbus; thus the solution has to be open AND vendor independent
cost effective - the overall costs for hardware, engineering, installation and maintenance must decrease; you don’t want to spend more money then for the already existing solution
reliability - a fieldbus needs to provide features which make sure that the reliability is equal or higher as with parallel wiring
easy to use - fieldbus must be easy to install, to configure and to evaluate diagnostics in the case of an error
automation needs - the system of your choice should cover the communication requirements of simple I-/O-devices and (at the same time) of intelligent drives or MMI-systems
to fullfill all this requirements, we need standardization
*Status: Q1/2000

8. Solution for all your Automation Needs
Internet
Enterprise
Peer-to-Peer
Cell Level
Notes:
What kind of requirements do user have to fieldbus systems ?
1st of all, it has to be deterministic; if you’re going to replace the classic parallel wiring you still want to be able to calculate your cycle time and therefore the reaction time of your system to certain events
flexibility - it should be easy to expand or change the system
interoperability - devices from several vendors will be connected to the fieldbus; thus the solution has to be open AND vendor independent
cost effective - the overall costs for hardware, engineering, installation and maintenance must decrease; you don’t want to spend more money then for the already existing solution
reliability - a fieldbus needs to provide features which make sure that the reliability is equal or higher as with parallel wiring
easy to use - fieldbus must be easy to install, to configure and to evaluate diagnostics in the case of an error
automation needs - the system of your choice should cover the communication requirements of simple I-/O-devices and (at the same time) of intelligent drives or MMI-systems
to fullfill all this requirements, we need standardization
Hazardous
Area
High Speed I/O
Field Level

9. …see Electronic Product Guide on www.profibus.com for complete list
Solution for all your … (continued)
1,900 products from more than 280 different vendors
I/O
Valves
Tools
SIEMENS
6SE7016-1EA30
WR 2,2 kW Nr
SIMOVERT SC
Software
Drivers
Drives
Controllers
Notes:
What kind of requirements do user have to fieldbus systems ?
1st of all, it has to be deterministic; if you’re going to replace the classic parallel wiring you still want to be able to calculate your cycle time and therefore the reaction time of your system to certain events
flexibility - it should be easy to expand or change the system
interoperability - devices from several vendors will be connected to the fieldbus; thus the solution has to be open AND vendor independent
cost effective - the overall costs for hardware, engineering, installation and maintenance must decrease; you don’t want to spend more money then for the already existing solution
reliability - a fieldbus needs to provide features which make sure that the reliability is equal or higher as with parallel wiring
easy to use - fieldbus must be easy to install, to configure and to evaluate diagnostics in the case of an error
automation needs - the system of your choice should cover the communication requirements of simple I-/O-devices and (at the same time) of intelligent drives or MMI-systems
to fullfill all this requirements, we need standardization
Training &
Services
Network
Components
Instruments
PC Boards
HMI
…see Electronic Product Guide on for complete list

10. Solution for all your … (continued)
Peer-to-Peer (Fieldbus Message Specification - FMS)
Connection oriented communication
Definition of communication objects
Transmission rate up to 12 Mbaud
Several masters can participate
Master-master communication
Several master can write to the same field device
Up to 244 bytes of user data
Peer-to-Peer
Notes:
What kind of requirements do user have to fieldbus systems ?
1st of all, it has to be deterministic; if you’re going to replace the classic parallel wiring you still want to be able to calculate your cycle time and therefore the reaction time of your system to certain events
flexibility - it should be easy to expand or change the system
interoperability - devices from several vendors will be connected to the fieldbus; thus the solution has to be open AND vendor independent
cost effective - the overall costs for hardware, engineering, installation and maintenance must decrease; you don’t want to spend more money then for the already existing solution
reliability - a fieldbus needs to provide features which make sure that the reliability is equal or higher as with parallel wiring
easy to use - fieldbus must be easy to install, to configure and to evaluate diagnostics in the case of an error
automation needs - the system of your choice should cover the communication requirements of simple I-/O-devices and (at the same time) of intelligent drives or MMI-systems
to fullfill all this requirements, we need standardization

11. Solution for all your … (continued)
High Speed I/O (Decentralized Periphery - DP)
High speed data exchange
Transmission rate up to 12Mbaud
Several masters can participate
ONE master ONLY can write to a field device
Up to 244 bytes of user data
Same cables & components as Peer-to-Peer
Operation together with Peer-to-Peer in one network possible
Notes:
What kind of requirements do user have to fieldbus systems ?
1st of all, it has to be deterministic; if you’re going to replace the classic parallel wiring you still want to be able to calculate your cycle time and therefore the reaction time of your system to certain events
flexibility - it should be easy to expand or change the system
interoperability - devices from several vendors will be connected to the fieldbus; thus the solution has to be open AND vendor independent
cost effective - the overall costs for hardware, engineering, installation and maintenance must decrease; you don’t want to spend more money then for the already existing solution
reliability - a fieldbus needs to provide features which make sure that the reliability is equal or higher as with parallel wiring
easy to use - fieldbus must be easy to install, to configure and to evaluate diagnostics in the case of an error
automation needs - the system of your choice should cover the communication requirements of simple I-/O-devices and (at the same time) of intelligent drives or MMI-systems
to fullfill all this requirements, we need standardization

12. Solution for all your … (continued)
Hazardous Area (Process Automation - PA)
Protocol is DP - PA field devices are controlled by standard DP Master
According to IEC different physical setup
Transmission rate 31.25kbaud
Power and data are transferred via the same wire
Notes:
What kind of requirements do user have to fieldbus systems ?
1st of all, it has to be deterministic; if you’re going to replace the classic parallel wiring you still want to be able to calculate your cycle time and therefore the reaction time of your system to certain events
flexibility - it should be easy to expand or change the system
interoperability - devices from several vendors will be connected to the fieldbus; thus the solution has to be open AND vendor independent
cost effective - the overall costs for hardware, engineering, installation and maintenance must decrease; you don’t want to spend more money then for the already existing solution
reliability - a fieldbus needs to provide features which make sure that the reliability is equal or higher as with parallel wiring
easy to use - fieldbus must be easy to install, to configure and to evaluate diagnostics in the case of an error
automation needs - the system of your choice should cover the communication requirements of simple I-/O-devices and (at the same time) of intelligent drives or MMI-systems
to fullfill all this requirements, we need standardization

13. Reliable & Future Oriented
…because PROFIBUS is deterministic
…because methods for diagnostic & error detection are built into the system
…because PROFIBUS International ensures the quality together with test labs
…because a detailed test & certification procedure is available & established
Notes:
Independent of proprietary solution - use of a standardized protocol
vendor independent - multiple vendors offer interconnectivity
cost savings - save in installation, startup and maintenance
increase of productivity in terms of
faster - faster communication possible
more flexible - startup with separate parts of the whole installation possible
easy expandable - add on with 2 wires is easy
customized - the variety of products from different companies allows a customized solution. The perfomed solution for your needs.

14. Reliable & Future Oriented (continued)
More than 3,000,000 Nodes installed… *
Notes:
Independent of proprietary solution - use of a standardized protocol
vendor independent - multiple vendors offer interconnectivity
cost savings - save in installation, startup and maintenance
increase of productivity in terms of
faster - faster communication possible
more flexible - startup with separate parts of the whole installation possible
easy expandable - add on with 2 wires is easy
customized - the variety of products from different companies allows a customized solution. The perfomed solution for your needs.
*Status: Q1/2000

15. PROFIBUS International
Reliable & Future Oriented (continued)
Standard is stable - NOT static!
PROFIBUS PA Certification
Maintenance of the PROFIBUS Physical, Data-Link and Application Layer
Fiber Optics
PROFIBUS-DP Specification and Maintenance (DPV1 Extensions)
Intrinsic Safety
Electro-mechanics for IP20 and IP65/67
PROFIBUS on Ethernet
IEC 1131 Communication Function Blocks
Human Machine Interfaces (HMI)
PROFIBUS PA Profile
Safety Profile
Open Integration (OPC Interface)
Device Description Language
GSD Specification for PROFIBUS-DP
PROFIDrive Profile
Coordination of Activities for the Use of PROFIBUS With PLCs
PROFIBUS International
Working Groups
Notes:
Independent of proprietary solution - use of a standardized protocol
vendor independent - multiple vendors offer interconnectivity
cost savings - save in installation, startup and maintenance
increase of productivity in terms of
faster - faster communication possible
more flexible - startup with separate parts of the whole installation possible
easy expandable - add on with 2 wires is easy
customized - the variety of products from different companies allows a customized solution. The perfomed solution for your needs.

16. Flexibility... …because of number of products and vendors
…because of the variety of services (peer-to-peer, high speed I/O and hazardous area)
…because of the possible network topologies (line, tree, star, ring)
…because of the number of stations you can connect, the distance you can cover and the amount of data you can transfer
…because it is easy to expand an existing network
Notes:
Independent of proprietary solution - use of a standardized protocol
vendor independent - multiple vendors offer interconnectivity
cost savings - save in installation, startup and maintenance
increase of productivity in terms of
faster - faster communication possible
more flexible - startup with separate parts of the whole installation possible
easy expandable - add on with 2 wires is easy
customized - the variety of products from different companies allows a customized solution. The perfomed solution for your needs.

17. Cost Savings Fieldbus Cabinet Cabinet I/O Planning Documentation
Terminal blocks
Distributor
Terminal block
Cabinet
Safety barrier
PLC
Cabinet
Fieldbus
I/O
Planning
Documentation
Installation
Commissioning
Notes:
Independent of proprietary solution - use of a standardized protocol
vendor independent - multiple vendors offer interconnectivity
cost savings - save in installation, startup and maintenance
increase of productivity in terms of
faster - faster communication possible
more flexible - startup with separate parts of the whole installation possible
easy expandable - add on with 2 wires is easy
customized - the variety of products from different companies allows a customized solution. The perfomed solution for your needs.
Service

18. Cost Savings (continued)
150%
Engineering
100%
Assembly
100%
Hardware
22%
57%
27%
Notes:
Independent of proprietary solution - use of a standardized protocol
vendor independent - multiple vendors offer interconnectivity
cost savings - save in installation, startup and maintenance
increase of productivity in terms of
faster - faster communication possible
more flexible - startup with separate parts of the whole installation possible
easy expandable - add on with 2 wires is easy
customized - the variety of products from different companies allows a customized solution. The perfomed solution for your needs.
50%
12%
22%
51%
23%
Reference: Namur AK 3.5, Dr. Rathje, Bayer AG 0%
Today (4...20mA)
PROFIBUS