Presentation is loading. Please wait.

Presentation is loading. Please wait.

King Saud University – College of Engineering Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr.

Published by Modified over 8 years ago

Similar presentations

Presentation on theme: "King Saud University – College of Engineering Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr."— Presentation transcript:

1 King Saud University – College of Engineering Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr. S. Darwish and Dr. A. ALSamhan

2 Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr. Al-Samhan & Dr Darwish Solid and Finite-Element Modeling of Electric Motor Rotor Stator Conductor

3 Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr Darwish & Dr. Al-Samhan Finite-Element Results of Loaded Table

4 Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr. Al-Samhan & Dr Darwish Finite-Element Modeling and Design of Riveted Joints

5 Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr Darwish & Dr. Al-Samhan Finite-Element Modeling and Design of a Milling Cutter

6 Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr. Al-Samhan & Dr Darwish Finite-Element Modeling and Design of a Milling Cutter

7 Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr. Al-Samhan & Dr Darwish Thermal Finite-Element Modeling and Analysis of Weld- bond Joint

8 Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr. Al-Samhan & Dr Darwish Finite-Element Modeling and Design of Double Containment Joint

9 Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr Darwish & Dr. Al-Samhan Finite-Element Modeling and Design of Water Pipe

10 Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr Darwish & Dr. Al-Samhan Finite-Element Modeling and Design of Water Pipe

11 Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr. Al-Samhan & Dr Darwish Finite-Element Modeling and Design of Water Pipe

12 Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr. Al-Samhan & Dr Darwish Finite-Element Modeling and Design of a Single Point Tool

13 Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr. Al-Samhan & Dr Darwish Finite-Element Modeling and Design of a Single Point Tool

14 Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr. Al-Samhan & Dr Darwish Finite-Element Modeling and Design of a Single Point Tool

15 Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr. Al-Samhan & Dr Darwish Finite-Element Modeling and Design of Indexing Sprocket

16 Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr. Al-Samhan & Dr Darwish Finite-Element Modeling and Design of Fined Tube

Download ppt "King Saud University – College of Engineering Industrial Engineering Department Finite-Element Modeling Group Students Creative Work Supervised by Dr."

Similar presentations

ELECTRICAL, THERMAL AND MECHANICAL PROPERTIES OF RANDOM MIXTURES MATERIALS RESEARCH CENTRE DEPARTMENT OF MECHANICAL ENGINEERING UNIVERSITY OF BATH, UK.

ELECTRICAL, THERMAL AND MECHANICAL PROPERTIES OF RANDOM MIXTURES MATERIALS RESEARCH CENTRE DEPARTMENT OF MECHANICAL ENGINEERING UNIVERSITY OF BATH, UK.
Www.termomacchine.com. Company and Mission Established in 1976, Termomacchine has been continuously engaged in the development of newer design and manufacturing.

Company and Mission Established in 1976, Termomacchine has been continuously engaged in the development of newer design and manufacturing.
بسم الله الرحمن الرحيم (SAMPLE PROGRAM G02EX3) Done by: Omar Al-Shehri Hassan Al-Saqqaf King Saud University College of Engineering Industrial Engineering.

بسم الله الرحمن الرحيم (SAMPLE PROGRAM G02EX3) Done by: Omar Al-Shehri Hassan Al-Saqqaf King Saud University College of Engineering Industrial Engineering.
Production Technology (IND 006) Preparatory Year, Faculty of Engineering, Fayoum University Dr. Ahmed Salah Abou Taleb Lecturer, Industrial Engineering.

Production Technology (IND 006) Preparatory Year, Faculty of Engineering, Fayoum University Dr. Ahmed Salah Abou Taleb Lecturer, Industrial Engineering.
AN-NAJAH NATIONAL UNIVERSITY FACULTY OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING Prepared by: Wajdi abu-muhsen Khaled aamer Ahmad Al-Hunate Nabeel.

AN-NAJAH NATIONAL UNIVERSITY FACULTY OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING Prepared by: Wajdi abu-muhsen Khaled aamer Ahmad Al-Hunate Nabeel.
Field-Oriented Control of Induction Machine

Field-Oriented Control of Induction Machine
ME 307 Machine Design I Dr. A. Bazoune Chapter 7: Fatigue Failure Resulting from variable Loading Dr. A. Aziz Bazoune King Fahd University of Petroleum.

ME 307 Machine Design I Dr. A. Bazoune Chapter 7: Fatigue Failure Resulting from variable Loading Dr. A. Aziz Bazoune King Fahd University of Petroleum.
King Saud University College engineering Chemical department Air-Cooled heat Exchanger Name: Mohammed Othman Al-zahrani ID:426104592 Dr. Malek.

King Saud University College engineering Chemical department Air-Cooled heat Exchanger Name: Mohammed Othman Al-zahrani ID: Dr. Malek.
SAE MINI BAJA PROJECT SAE MINI BAJA PROJECT PORTLAND STATE UNIVERSITY TEAM MEMBERS: MIKE CUNDIFF JAMES GARVIN MIKE KRANDA MICHAEL SINGER CHRIS WALTHERS.

SAE MINI BAJA PROJECT SAE MINI BAJA PROJECT PORTLAND STATE UNIVERSITY TEAM MEMBERS: MIKE CUNDIFF JAMES GARVIN MIKE KRANDA MICHAEL SINGER CHRIS WALTHERS.
1 times table 2 times table 3 times table 4 times table 5 times table

1 times table 2 times table 3 times table 4 times table 5 times table
Dr. A. Al-Abduljabbar Mechanical Engineering Department, King Saud University, Riyadh, Saudi Arabia ME 363: Mechanics of Machines.

Dr. A. Al-Abduljabbar Mechanical Engineering Department, King Saud University, Riyadh, Saudi Arabia ME 363: Mechanics of Machines.
Master of Engineering in Electrical Engineering.

Master of Engineering in Electrical Engineering.
Electricity Generation. What is energy? Types of energy Energy = the ability to do work Energy cannot be created or destroyed; it just transforms from.

Electricity Generation. What is energy? Types of energy Energy = the ability to do work Energy cannot be created or destroyed; it just transforms from.
Examples of Machines Used in CIM Applications

Examples of Machines Used in CIM Applications
NUMERICAL ANALYSIS OF BIOENGINEERING CASE STUDY BY ABDULAZIZ A. AL-HEGELAN 426100273 HASAN O. ALHAZMI 426104751 AHMAD A. ALMAYMOONI 426103310 SUPERVISOR;

NUMERICAL ANALYSIS OF BIOENGINEERING CASE STUDY BY ABDULAZIZ A. AL-HEGELAN HASAN O. ALHAZMI AHMAD A. ALMAYMOONI SUPERVISOR;
Chapter 5 Memory and Programmable Logic 5.1. Introduction 5.2. Random Access Memory 5.3. Memory Encoding 5.4. Read Only Memory 5.5. Programmable Logic.

Chapter 5 Memory and Programmable Logic 5.1. Introduction 5.2. Random Access Memory 5.3. Memory Encoding 5.4. Read Only Memory 5.5. Programmable Logic.
TRISHUL Winding Solutions Pvt Ltd ROTOR COILS  It is the moving part of a rotary system.

TRISHUL Winding Solutions Pvt Ltd ROTOR COILS  It is the moving part of a rotary system.
ESB G86 MAE Visiting Committee April 10, 2015. ESB G86 Innovation Build Center Provide Conventional and CNC Machining Capabilities Complement Industrial.

ESB G86 MAE Visiting Committee April 10, ESB G86 Innovation Build Center Provide Conventional and CNC Machining Capabilities Complement Industrial.
Copyright ©2011, ©2008, ©2005 by Pearson Education, Inc. Upper Saddle River, New Jersey 07458 All rights reserved. Electrical Engineering: Principles and.

Copyright ©2011, ©2008, ©2005 by Pearson Education, Inc. Upper Saddle River, New Jersey All rights reserved. Electrical Engineering: Principles and.
© The McGraw-Hill Companies, Inc. 2000 McGraw-Hill 1 PRINCIPLES AND APPLICATIONS OF ELECTRICAL ENGINEERING THIRD EDITION G I O R G I O R I Z Z O N I 17.

© The McGraw-Hill Companies, Inc McGraw-Hill 1 PRINCIPLES AND APPLICATIONS OF ELECTRICAL ENGINEERING THIRD EDITION G I O R G I O R I Z Z O N I 17.

Similar presentations

Ads by Google